[PATCH RESEND 5/7] spl: riscv: add os type for next booting stage

[Randolph]

If SPL_LOAD_FIT_OPENSBI_OS_BOOT is enabled, the function
spl_invoke_opensbi should change the target OS type to IH_OS_LINUX.
OpenSBI will load the Linux image as the next boot stage.
The os_takes_devicetree function returns a value of true or false
depending on whether or not SPL_LOAD_FIT_OPENSBI_OS_BOOT is enabled.

Signed-off-by: Randolph <randolph at andestech.com>
---
 common/spl/spl_fit.c     | 4 ++++
 common/spl/spl_opensbi.c | 7 ++++++-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index 730639f756..750562721a 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -351,7 +351,11 @@ static bool os_takes_devicetree(uint8_t os)
 	case IH_OS_U_BOOT:
 		return true;
 	case IH_OS_LINUX:
+#ifdef CONFIG_RISCV
+		return IS_ENABLED(CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT);
+#else
 		return IS_ENABLED(CONFIG_SPL_OS_BOOT);
+#endif
 	default:
 		return false;
 	}
diff --git a/common/spl/spl_opensbi.c b/common/spl/spl_opensbi.c
index a0c5f35dab..708869ad48 100644
--- a/common/spl/spl_opensbi.c
+++ b/common/spl/spl_opensbi.c
@@ -58,9 +58,14 @@ void __noreturn spl_invoke_opensbi(struct spl_image_info *spl_image)
 
 	/*
 	 * Find next os image in /fit-images
-	 * The next os image default is u-boot proper
+	 * The next os image default is u-boot proper, once enable
+	 * OpenSBI OS boot mode, the OS image should be linux.
 	 */
+#if CONFIG_IS_ENABLED(LOAD_FIT_OPENSBI_OS_BOOT)
+	os_type = IH_OS_LINUX;
+#else
 	os_type = IH_OS_U_BOOT;
+#endif
 	ret = spl_opensbi_find_os_node(spl_image->fdt_addr, &os_node, os_type);
 	if (ret) {
 		pr_err("Can't find %s node for opensbi, %d\n",
-- 
2.34.1