[PATCH] net: ftgmac100: Add reset control
Ramon Fried
rfried.dev at gmail.com
Fri Oct 6 22:31:40 CEST 2023
On Thu, Jul 27, 2023 at 4:58 AM Dylan Hung <kobedylan at gmail.com> wrote:
>
> Add optional reset control, especially for the Aspeed SOC. For the
> hardware without a reset line, the reset assertion/deassertion will be
> skipped.
>
> Signed-off-by: Dylan Hung <dylan_hung at aspeedtech.com>
> ---
> drivers/net/ftgmac100.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c
> index a50cde338a..886b97119d 100644
> --- a/drivers/net/ftgmac100.c
> +++ b/drivers/net/ftgmac100.c
> @@ -13,6 +13,7 @@
>
> #include <common.h>
> #include <clk.h>
> +#include <reset.h>
> #include <cpu_func.h>
> #include <dm.h>
> #include <log.h>
> @@ -90,6 +91,7 @@ struct ftgmac100_data {
> u32 max_speed;
>
> struct clk_bulk clks;
> + struct reset_ctl *reset_ctl;
>
> /* End of RX/TX ring buffer bits. Depend on model */
> u32 rxdes0_edorr_mask;
> @@ -568,6 +570,8 @@ static int ftgmac100_of_to_plat(struct udevice *dev)
> priv->txdes0_edotr_mask = BIT(15);
> }
>
> + priv->reset_ctl = devm_reset_control_get_optional(dev, NULL);
> +
> return clk_get_bulk(dev, &priv->clks);
> }
>
> @@ -593,6 +597,12 @@ static int ftgmac100_probe(struct udevice *dev)
> if (ret)
> goto out;
>
> + if (priv->reset_ctl) {
> + ret = reset_deassert(priv->reset_ctl);
> + if (ret)
> + goto out;
> + }
> +
> /*
> * If DM MDIO is enabled, the MDIO bus will be initialized later in
> * dm_eth_phy_connect
> @@ -628,6 +638,8 @@ static int ftgmac100_remove(struct udevice *dev)
> free(priv->phydev);
> mdio_unregister(priv->bus);
> mdio_free(priv->bus);
> + if (priv->reset_ctl)
> + reset_assert(priv->reset_ctl);
> clk_release_bulk(&priv->clks);
>
> return 0;
> --
> 2.25.1
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>
More information about the U-Boot
mailing list