[PATCH 2/2] dm: adc: imx93-adc depends on ADC (fix boot)

[Fabio Estevam]

On Wed, Oct 4, 2023 at 6:09 AM Sébastien Szymanski
<sebastien.szymanski at armadeus.com> wrote:
>
> The i.MX93 11x11 EVK fails to boot with following error:
>
>  Model: NXP i.MX93 11X11 EVK board
>  DRAM:  2 GiB
>  Error binding driver 'imx93-adc': -96
>  Some drivers failed to bind
>  Error binding driver 'simple_bus': -96
>  Some drivers failed to bind
>  Error binding driver 'simple_bus': -96
>  Some drivers failed to bind
>  initcall sequence 00000000fffb8f28 failed at call 000000008021e0d4 (err=-96)
>  ### ERROR ### Please RESET the board ###
>
> That's because since commit e7ff54d96303 ("imx93_evk: defconfig: add adc
> support") CONFIG_ADC_IMX93 is enabled but CONFIG_ADC is not.
> Fix this by enabling CONFIG_ADC in imx93_11x11_evk_defconfig.
>
> Make sure this situation won't happen again in future i.MX93 defconfig by
> making CONFIG_ADC_IMX93 depend on CONFIG_ADC.
>
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski at armadeus.com>

Reviewed-by: Fabio Estevam <festevam at gmail.com>