[PATCH v4] arm64: versal: Add SelectMAP boot mode identification

[Polak, Leszek]

The SelectMAP configuration interface provides an 8-bit,
16-bit or 32-bit bidirectional data bus interface to the Versal FPGA
configuration logic that can be used for both configuration and readback.

A connected microcontoller to the SelectMAP interface can load boot
image with bitstream, TF-A (ARM Trusted Firmware) and U-Boot.

This commit adds the missing identification of the SelectMAP mode.

Signed-off-by: Polak, Leszek <LPolak at arri.de>
Reviewed-by: Stefan Roese <sr at denx.de>
Cc: Michal Simek <michal.simek at amd.com>
Cc: Stefan Roese <sr at denx.de>
---
v2:
- Drop assignment of 'mode' as selectmap is not be supported
  by distro boot
v3:
- Changed E-Mail/Name to be the same as git setup
v4:
- Fixed formatting
---
 arch/arm/mach-versal-net/include/mach/hardware.h | 1 +
 arch/arm/mach-versal/include/mach/hardware.h     | 1 +
 board/xilinx/versal-net/board.c                  | 3 +++
 board/xilinx/versal/board.c                      | 4 ++++
 4 files changed, 9 insertions(+)

diff --git a/arch/arm/mach-versal-net/include/mach/hardware.h b/arch/arm/mach-versal-net/include/mach/hardware.h
index 9bddb8b007..767cdd3686 100644
--- a/arch/arm/mach-versal-net/include/mach/hardware.h
+++ b/arch/arm/mach-versal-net/include/mach/hardware.h
@@ -66,6 +66,7 @@ struct crp_regs {
 #define EMMC_MODE	0x00000006
 #define USB_MODE	0x00000007
 #define OSPI_MODE	0x00000008
+#define SELECTMAP_MODE	0x0000000A
 #define SD1_LSHFT_MODE	0x0000000E /* SD1 Level shifter */
 #define JTAG_MODE	0x00000000
 #define BOOT_MODE_USE_ALT	0x100
diff --git a/arch/arm/mach-versal/include/mach/hardware.h b/arch/arm/mach-versal/include/mach/hardware.h
index 000af974e8..9d1c2f0dcf 100644
--- a/arch/arm/mach-versal/include/mach/hardware.h
+++ b/arch/arm/mach-versal/include/mach/hardware.h
@@ -82,6 +82,7 @@ struct crp_regs {
 #define EMMC_MODE	0x00000006
 #define USB_MODE	0x00000007
 #define OSPI_MODE	0x00000008
+#define SELECTMAP_MODE	0x0000000A
 #define SD1_LSHFT_MODE	0x0000000E /* SD1 Level shifter */
 #define JTAG_MODE	0x00000000
 #define BOOT_MODE_USE_ALT	0x100
diff --git a/board/xilinx/versal-net/board.c b/board/xilinx/versal-net/board.c
index c18be0c26c..990ca1650a 100644
--- a/board/xilinx/versal-net/board.c
+++ b/board/xilinx/versal-net/board.c
@@ -252,6 +252,9 @@ static int boot_targets_setup(void)
 		mode = "mmc";
 		bootseq = dev_seq(dev);
 		break;
+	case SELECTMAP_MODE:
+		puts("SELECTMAP_MODE\n");
+		break;
 	case SD_MODE:
 		puts("SD_MODE\n");
 		if (uclass_get_device_by_name(UCLASS_MMC,
diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c
index e4bdd5d7a3..8c2e614ad8 100644
--- a/board/xilinx/versal/board.c
+++ b/board/xilinx/versal/board.c
@@ -174,6 +174,9 @@ static int boot_targets_setup(void)
 		mode = "mmc";
 		bootseq = dev_seq(dev);
 		break;
+	case SELECTMAP_MODE:
+		puts("SELECTMAP_MODE\n");
+		break;
 	case SD_MODE:
 		puts("SD_MODE\n");
 		if (uclass_get_device_by_name(UCLASS_MMC,
@@ -312,6 +315,7 @@ enum env_location env_get_location(enum env_operation op, int prio)
 			return ENVL_SPI_FLASH;
 		return ENVL_NOWHERE;
 	case JTAG_MODE:
+	case SELECTMAP_MODE:
 	default:
 		return ENVL_NOWHERE;
 	}
-- 
2.25.1