[PATCH v2 3/3] mx28evk: Add USB Mass Storage support

[Marek Vasut]

On 10/8/23 22:59, Fabio Estevam wrote:
> From: Fabio Estevam <festevam at denx.de>
> 
> Select the USB options to allow running "ums 0 mmc 0".
> 
> Signed-off-by: Fabio Estevam <festevam at denx.de>
> ---
> Changes since v1:
> - Remove unrelated config options. (Marek)
> 
>   configs/mx28evk_defconfig | 12 ++++++++++++
>   1 file changed, 12 insertions(+)
> 
> diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig
> index df0cceaea719..0b7c4b252ff0 100644
> --- a/configs/mx28evk_defconfig
> +++ b/configs/mx28evk_defconfig
> @@ -32,6 +32,8 @@ CONFIG_CMD_DM=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_NAND_TRIMFFS=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
>   CONFIG_CMD_CACHE=y
>   CONFIG_CMD_DATE=y
>   CONFIG_CMD_EXT4=y
> @@ -65,3 +67,13 @@ CONFIG_RTC_MXS=y
>   CONFIG_DM_SERIAL=y
>   CONFIG_SPI=y
>   CONFIG_USB=y
> +CONFIG_SPL_USB_HOST=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_MAX_CONTROLLER_COUNT=2
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="FSL"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x0525
> +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
> +CONFIG_CI_UDC=y
> +CONFIG_USB_GADGET_DOWNLOAD=y
> +CONFIG_SPL_USB_SDP_SUPPORT=y

But the SPL SDP is still here ^ , how come ?