[PATCH v2 18/19] arm: dts: Import RZ/G2L SMARC EVK device tree
Paul Barker
paul.barker.ct at bp.renesas.com
Mon Oct 9 18:46:44 CEST 2023
The Renesas RZ/G2L SMARC Evaluation Board Kit consists of the RZ/G2L
System-on-Module (SOM) based on the R9A07G044L2 SoC, and a common SMARC
carrier board.
This patch is based on the corresponding Linux v6.5 device tree
(commit 52e12027d50affbf60c6c9c64db8017391b0c22e).
Signed-off-by: Paul Barker <paul.barker.ct at bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz at bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
v1->v2:
* Added the exact Linux commit we imported from.
* Add Marek's Reivewed-by.
arch/arm/dts/Makefile | 3 +
arch/arm/dts/r9a07g044.dtsi | 1273 +++++++++++++++++++++
arch/arm/dts/r9a07g044l2-smarc.dts | 18 +
arch/arm/dts/r9a07g044l2.dtsi | 13 +
arch/arm/dts/rz-smarc-common.dtsi | 183 +++
arch/arm/dts/rzg2l-smarc-pinfunction.dtsi | 137 +++
arch/arm/dts/rzg2l-smarc-som.dtsi | 353 ++++++
arch/arm/dts/rzg2l-smarc.dtsi | 144 +++
8 files changed, 2124 insertions(+)
create mode 100644 arch/arm/dts/r9a07g044.dtsi
create mode 100644 arch/arm/dts/r9a07g044l2-smarc.dts
create mode 100644 arch/arm/dts/r9a07g044l2.dtsi
create mode 100644 arch/arm/dts/rz-smarc-common.dtsi
create mode 100644 arch/arm/dts/rzg2l-smarc-pinfunction.dtsi
create mode 100644 arch/arm/dts/rzg2l-smarc-som.dtsi
create mode 100644 arch/arm/dts/rzg2l-smarc.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index bde2176ec7f6..8c1a6ccdb72e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1099,6 +1099,9 @@ dtb-$(CONFIG_RCAR_GEN4) += \
r8a779f0-spider-u-boot.dtb \
r8a779g0-white-hawk-u-boot.dtb
+dtb-$(CONFIG_TARGET_RZG2L) += \
+ r9a07g044l2-smarc.dts
+
ifdef CONFIG_RCAR_64
DTC_FLAGS += -R 4 -p 0x1000
endif
diff --git a/arch/arm/dts/r9a07g044.dtsi b/arch/arm/dts/r9a07g044.dtsi
new file mode 100644
index 000000000000..232910e07444
--- /dev/null
+++ b/arch/arm/dts/r9a07g044.dtsi
@@ -0,0 +1,1273 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a07g044-cpg.h>
+
+/ {
+ compatible = "renesas,r9a07g044";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ audio_clk1: audio1-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by boards that provide it */
+ clock-frequency = <0>;
+ };
+
+ audio_clk2: audio2-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by boards that provide it */
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+ extal_clk: extal-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ cluster0_opp: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-150000000 {
+ opp-hz = /bits/ 64 <150000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ opp-suspend;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
+ cpu0: cpu at 0 {
+ compatible = "arm,cortex-a55";
+ reg = <0>;
+ device_type = "cpu";
+ #cooling-cells = <2>;
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
+ operating-points-v2 = <&cluster0_opp>;
+ };
+
+ cpu1: cpu at 100 {
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
+ operating-points-v2 = <&cluster0_opp>;
+ };
+
+ L3_CA55: cache-controller-0 {
+ compatible = "cache";
+ cache-unified;
+ cache-size = <0x40000>;
+ cache-level = <3>;
+ };
+ };
+
+ gpu_opp_table: opp-table-1 {
+ compatible = "operating-points-v2";
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-125000000 {
+ opp-hz = /bits/ 64 <125000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-62500000 {
+ opp-hz = /bits/ 64 <62500000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ opp-microvolt = <1100000>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a55-pmu";
+ interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mtu3: timer at 10001200 {
+ compatible = "renesas,r9a07g044-mtu3",
+ "renesas,rz-mtu3";
+ reg = <0 0x10001200 0 0xb00>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
+ "tgiv0", "tgie0", "tgif0",
+ "tgia1", "tgib1", "tgiv1", "tgiu1",
+ "tgia2", "tgib2", "tgiv2", "tgiu2",
+ "tgia3", "tgib3", "tgic3", "tgid3",
+ "tgiv3",
+ "tgia4", "tgib4", "tgic4", "tgid4",
+ "tgiv4",
+ "tgiu5", "tgiv5", "tgiw5",
+ "tgia6", "tgib6", "tgic6", "tgid6",
+ "tgiv6",
+ "tgia7", "tgib7", "tgic7", "tgid7",
+ "tgiv7",
+ "tgia8", "tgib8", "tgic8", "tgid8",
+ "tgiv8", "tgiu8";
+ clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ ssi0: ssi at 10049c00 {
+ compatible = "renesas,r9a07g044-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x10049c00 0 0x400>;
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx";
+ clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
+ <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
+ dmas = <&dmac 0x2655>, <&dmac 0x2656>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ ssi1: ssi at 1004a000 {
+ compatible = "renesas,r9a07g044-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a000 0 0x400>;
+ interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx";
+ clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>,
+ <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G044_SSI1_RST_M2_REG>;
+ dmas = <&dmac 0x2659>, <&dmac 0x265a>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ ssi2: ssi at 1004a400 {
+ compatible = "renesas,r9a07g044-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a400 0 0x400>;
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>,
+ <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G044_SSI2_RST_M2_REG>;
+ dmas = <&dmac 0x265f>;
+ dma-names = "rt";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ ssi3: ssi at 1004a800 {
+ compatible = "renesas,r9a07g044-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a800 0 0x400>;
+ interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx";
+ clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>,
+ <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G044_SSI3_RST_M2_REG>;
+ dmas = <&dmac 0x2661>, <&dmac 0x2662>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi at 1004ac00 {
+ compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+ reg = <0 0x1004ac00 0 0x400>;
+ interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>;
+ resets = <&cpg R9A07G044_RSPI0_RST>;
+ dmas = <&dmac 0x2e95>, <&dmac 0x2e96>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi at 1004b000 {
+ compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+ reg = <0 0x1004b000 0 0x400>;
+ interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>;
+ resets = <&cpg R9A07G044_RSPI1_RST>;
+ dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi at 1004b400 {
+ compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+ reg = <0 0x1004b400 0 0x400>;
+ interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>;
+ resets = <&cpg R9A07G044_RSPI2_RST>;
+ dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ scif0: serial at 1004b800 {
+ compatible = "renesas,scif-r9a07g044";
+ reg = <0 0x1004b800 0 0x400>;
+ interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>;
+ status = "disabled";
+ };
+
+ scif1: serial at 1004bc00 {
+ compatible = "renesas,scif-r9a07g044";
+ reg = <0 0x1004bc00 0 0x400>;
+ interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G044_SCIF1_CLK_PCK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_SCIF1_RST_SYSTEM_N>;
+ status = "disabled";
+ };
+
+ scif2: serial at 1004c000 {
+ compatible = "renesas,scif-r9a07g044";
+ reg = <0 0x1004c000 0 0x400>;
+ interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G044_SCIF2_CLK_PCK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_SCIF2_RST_SYSTEM_N>;
+ status = "disabled";
+ };
+
+ scif3: serial at 1004c400 {
+ compatible = "renesas,scif-r9a07g044";
+ reg = <0 0x1004c400 0 0x400>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G044_SCIF3_CLK_PCK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_SCIF3_RST_SYSTEM_N>;
+ status = "disabled";
+ };
+
+ scif4: serial at 1004c800 {
+ compatible = "renesas,scif-r9a07g044";
+ reg = <0 0x1004c800 0 0x400>;
+ interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G044_SCIF4_CLK_PCK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_SCIF4_RST_SYSTEM_N>;
+ status = "disabled";
+ };
+
+ sci0: serial at 1004d000 {
+ compatible = "renesas,r9a07g044-sci", "renesas,sci";
+ reg = <0 0x1004d000 0 0x400>;
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_SCI0_RST>;
+ status = "disabled";
+ };
+
+ sci1: serial at 1004d400 {
+ compatible = "renesas,r9a07g044-sci", "renesas,sci";
+ reg = <0 0x1004d400 0 0x400>;
+ interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_SCI1_RST>;
+ status = "disabled";
+ };
+
+ canfd: can at 10050000 {
+ compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd";
+ reg = <0 0x10050000 0 0x8000>;
+ interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "g_err", "g_recc",
+ "ch0_err", "ch0_rec", "ch0_trx",
+ "ch1_err", "ch1_rec", "ch1_trx";
+ clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>,
+ <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>;
+ assigned-clock-rates = <50000000>;
+ resets = <&cpg R9A07G044_CANFD_RSTP_N>,
+ <&cpg R9A07G044_CANFD_RSTC_N>;
+ reset-names = "rstp_n", "rstc_n";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+ channel1 {
+ status = "disabled";
+ };
+ };
+
+ i2c0: i2c at 10058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058000 0 0x400>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C0_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at 10058400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058400 0 0x400>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C1_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at 10058800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058800 0 0x400>;
+ interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C2_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at 10058c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+ reg = <0 0x10058c00 0 0x400>;
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G044_I2C3_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ adc: adc at 10059000 {
+ compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc";
+ reg = <0 0x10059000 0 0x400>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>,
+ <&cpg CPG_MOD R9A07G044_ADC_PCLK>;
+ clock-names = "adclk", "pclk";
+ resets = <&cpg R9A07G044_ADC_PRESETN>,
+ <&cpg R9A07G044_ADC_ADRST_N>;
+ reset-names = "presetn", "adrst-n";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel at 0 {
+ reg = <0>;
+ };
+ channel at 1 {
+ reg = <1>;
+ };
+ channel at 2 {
+ reg = <2>;
+ };
+ channel at 3 {
+ reg = <3>;
+ };
+ channel at 4 {
+ reg = <4>;
+ };
+ channel at 5 {
+ reg = <5>;
+ };
+ channel at 6 {
+ reg = <6>;
+ };
+ channel at 7 {
+ reg = <7>;
+ };
+ };
+
+ tsu: thermal at 10059400 {
+ compatible = "renesas,r9a07g044-tsu",
+ "renesas,rzg2l-tsu";
+ reg = <0 0x10059400 0 0x400>;
+ clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+ resets = <&cpg R9A07G044_TSU_PRESETN>;
+ power-domains = <&cpg>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ sbc: spi at 10060000 {
+ compatible = "renesas,r9a07g044-rpc-if",
+ "renesas,rzg2l-rpc-if";
+ reg = <0 0x10060000 0 0x10000>,
+ <0 0x20000000 0 0x10000000>,
+ <0 0x10070000 0 0x10000>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_SPI_CLK2>,
+ <&cpg CPG_MOD R9A07G044_SPI_CLK>;
+ resets = <&cpg R9A07G044_SPI_RST>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ cru: video at 10830000 {
+ compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
+ reg = <0 0x10830000 0 0x400>;
+ clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+ <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
+ <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
+ clock-names = "video", "apb", "axi";
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+ resets = <&cpg R9A07G044_CRU_PRESETN>,
+ <&cpg R9A07G044_CRU_ARESETN>;
+ reset-names = "presetn", "aresetn";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0>;
+ cruparallel: endpoint at 0 {
+ reg = <0>;
+ };
+ };
+
+ port at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+ crucsi2: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&csi2cru>;
+ };
+ };
+ };
+ };
+
+ csi2: csi2 at 10830400 {
+ compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
+ reg = <0 0x10830400 0 0xfc00>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
+ <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+ <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
+ clock-names = "system", "video", "apb";
+ resets = <&cpg R9A07G044_CRU_PRESETN>,
+ <&cpg R9A07G044_CRU_CMN_RSTB>;
+ reset-names = "presetn", "cmn-rstb";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ };
+
+ port at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ csi2cru: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&crucsi2>;
+ };
+ };
+ };
+ };
+
+ dsi: dsi at 10850000 {
+ compatible = "renesas,r9a07g044-mipi-dsi",
+ "renesas,rzg2l-mipi-dsi";
+ reg = <0 0x10850000 0 0x20000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "seq0", "seq1", "vin1", "rcv",
+ "ferr", "ppi", "debug";
+ clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+ clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+ resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+ <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+ <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+ reset-names = "rst", "arst", "prst";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ vspd: vsp at 10870000 {
+ compatible = "renesas,r9a07g044-vsp2";
+ reg = <0 0x10870000 0 0x10000>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+ <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+ <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+ clock-names = "aclk", "pclk", "vclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_LCDC_RESET_N>;
+ renesas,fcp = <&fcpvd>;
+ };
+
+ fcpvd: fcp at 10880000 {
+ compatible = "renesas,r9a07g044-fcpvd",
+ "renesas,fcpv";
+ reg = <0 0x10880000 0 0x10000>;
+ clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+ <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+ <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+ clock-names = "aclk", "pclk", "vclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_LCDC_RESET_N>;
+ };
+
+ cpg: clock-controller at 11010000 {
+ compatible = "renesas,r9a07g044-cpg";
+ reg = <0 0x11010000 0 0x10000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ sysc: system-controller at 11020000 {
+ compatible = "renesas,r9a07g044-sysc";
+ reg = <0 0x11020000 0 0x10000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpm_int", "ca55stbydone_int",
+ "cm33stbyr_int", "ca55_deny";
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl at 11030000 {
+ compatible = "renesas,r9a07g044-pinctrl";
+ reg = <0 0x11030000 0 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&irqc>;
+ interrupt-controller;
+ gpio-ranges = <&pinctrl 0 0 392>;
+ clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_GPIO_RSTN>,
+ <&cpg R9A07G044_GPIO_PORT_RESETN>,
+ <&cpg R9A07G044_GPIO_SPARE_RESETN>;
+ };
+
+ irqc: interrupt-controller at 110a0000 {
+ compatible = "renesas,r9a07g044-irqc",
+ "renesas,rzg2l-irqc";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x110a0000 0 0x10000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+ <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+ clock-names = "clk", "pclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_IA55_RESETN>;
+ };
+
+ dmac: dma-controller at 11820000 {
+ compatible = "renesas,r9a07g044-dmac",
+ "renesas,rz-dmac";
+ reg = <0 0x11820000 0 0x10000>,
+ <0 0x11830000 0 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
+ <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
+ clock-names = "main", "register";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_DMAC_ARESETN>,
+ <&cpg R9A07G044_DMAC_RST_ASYNC>;
+ reset-names = "arst", "rst_async";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ gpu: gpu at 11840000 {
+ compatible = "renesas,r9a07g044-mali",
+ "arm,mali-bifrost";
+ reg = <0x0 0x11840000 0x0 0x10000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu", "event";
+ clocks = <&cpg CPG_MOD R9A07G044_GPU_CLK>,
+ <&cpg CPG_MOD R9A07G044_GPU_AXI_CLK>,
+ <&cpg CPG_MOD R9A07G044_GPU_ACE_CLK>;
+ clock-names = "gpu", "bus", "bus_ace";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_GPU_RESETN>,
+ <&cpg R9A07G044_GPU_AXI_RESETN>,
+ <&cpg R9A07G044_GPU_ACE_RESETN>;
+ reset-names = "rst", "axi_rst", "ace_rst";
+ operating-points-v2 = <&gpu_opp_table>;
+ };
+
+ gic: interrupt-controller at 11900000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x11900000 0 0x40000>,
+ <0x0 0x11940000 0 0x60000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ sdhi0: mmc at 11c00000 {
+ compatible = "renesas,sdhi-r9a07g044",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0x0 0x11c00000 0 0x10000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK>,
+ <&cpg CPG_MOD R9A07G044_SDHI0_CLK_HS>,
+ <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>,
+ <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>;
+ clock-names = "core", "clkh", "cd", "aclk";
+ resets = <&cpg R9A07G044_SDHI0_IXRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sdhi1: mmc at 11c10000 {
+ compatible = "renesas,sdhi-r9a07g044",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0x0 0x11c10000 0 0x10000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK>,
+ <&cpg CPG_MOD R9A07G044_SDHI1_CLK_HS>,
+ <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>,
+ <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>;
+ clock-names = "core", "clkh", "cd", "aclk";
+ resets = <&cpg R9A07G044_SDHI1_IXRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ eth0: ethernet at 11c20000 {
+ compatible = "renesas,r9a07g044-gbeth",
+ "renesas,rzg2l-gbeth";
+ reg = <0 0x11c20000 0 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mux", "fil", "arp_ns";
+ phy-mode = "rgmii";
+ clocks = <&cpg CPG_MOD R9A07G044_ETH0_CLK_AXI>,
+ <&cpg CPG_MOD R9A07G044_ETH0_CLK_CHI>,
+ <&cpg CPG_CORE R9A07G044_CLK_HP>;
+ clock-names = "axi", "chi", "refclk";
+ resets = <&cpg R9A07G044_ETH0_RST_HW_N>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ eth1: ethernet at 11c30000 {
+ compatible = "renesas,r9a07g044-gbeth",
+ "renesas,rzg2l-gbeth";
+ reg = <0 0x11c30000 0 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mux", "fil", "arp_ns";
+ phy-mode = "rgmii";
+ clocks = <&cpg CPG_MOD R9A07G044_ETH1_CLK_AXI>,
+ <&cpg CPG_MOD R9A07G044_ETH1_CLK_CHI>,
+ <&cpg CPG_CORE R9A07G044_CLK_HP>;
+ clock-names = "axi", "chi", "refclk";
+ resets = <&cpg R9A07G044_ETH1_RST_HW_N>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ phyrst: usbphy-ctrl at 11c40000 {
+ compatible = "renesas,r9a07g044-usbphy-ctrl",
+ "renesas,rzg2l-usbphy-ctrl";
+ reg = <0 0x11c40000 0 0x10000>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
+ resets = <&cpg R9A07G044_USB_PRESETN>;
+ power-domains = <&cpg>;
+ #reset-cells = <1>;
+ status = "disabled";
+ };
+
+ ohci0: usb at 11c50000 {
+ compatible = "generic-ohci";
+ reg = <0 0x11c50000 0 0x100>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>,
+ <&cpg R9A07G044_USB_U2H0_HRESETN>;
+ phys = <&usb2_phy0 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ohci1: usb at 11c70000 {
+ compatible = "generic-ohci";
+ reg = <0 0x11c70000 0 0x100>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>,
+ <&cpg R9A07G044_USB_U2H1_HRESETN>;
+ phys = <&usb2_phy1 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci0: usb at 11c50100 {
+ compatible = "generic-ehci";
+ reg = <0 0x11c50100 0 0x100>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>,
+ <&cpg R9A07G044_USB_U2H0_HRESETN>;
+ phys = <&usb2_phy0 2>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci1: usb at 11c70100 {
+ compatible = "generic-ehci";
+ reg = <0 0x11c70100 0 0x100>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>,
+ <&cpg R9A07G044_USB_U2H1_HRESETN>;
+ phys = <&usb2_phy1 2>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy0: usb-phy at 11c50200 {
+ compatible = "renesas,usb2-phy-r9a07g044",
+ "renesas,rzg2l-usb2-phy";
+ reg = <0 0x11c50200 0 0x700>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy at 11c70200 {
+ compatible = "renesas,usb2-phy-r9a07g044",
+ "renesas,rzg2l-usb2-phy";
+ reg = <0 0x11c70200 0 0x700>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ hsusb: usb at 11c60000 {
+ compatible = "renesas,usbhs-r9a07g044",
+ "renesas,rza2-usbhs";
+ reg = <0 0x11c60000 0 0x10000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>;
+ resets = <&phyrst 0>,
+ <&cpg R9A07G044_USB_U2P_EXL_SYSRST>;
+ renesas,buswait = <7>;
+ phys = <&usb2_phy0 3>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt0: watchdog at 12800800 {
+ compatible = "renesas,r9a07g044-wdt",
+ "renesas,rzg2l-wdt";
+ reg = <0 0x12800800 0 0x400>;
+ clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>,
+ <&cpg CPG_MOD R9A07G044_WDT0_CLK>;
+ clock-names = "pclk", "oscclk";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "wdt", "perrout";
+ resets = <&cpg R9A07G044_WDT0_PRESETN>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt1: watchdog at 12800c00 {
+ compatible = "renesas,r9a07g044-wdt",
+ "renesas,rzg2l-wdt";
+ reg = <0 0x12800C00 0 0x400>;
+ clocks = <&cpg CPG_MOD R9A07G044_WDT1_PCLK>,
+ <&cpg CPG_MOD R9A07G044_WDT1_CLK>;
+ clock-names = "pclk", "oscclk";
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "wdt", "perrout";
+ resets = <&cpg R9A07G044_WDT1_PRESETN>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm0: timer at 12801000 {
+ compatible = "renesas,r9a07g044-ostm",
+ "renesas,ostm";
+ reg = <0x0 0x12801000 0x0 0x400>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G044_OSTM0_PCLK>;
+ resets = <&cpg R9A07G044_OSTM0_PRESETZ>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm1: timer at 12801400 {
+ compatible = "renesas,r9a07g044-ostm",
+ "renesas,ostm";
+ reg = <0x0 0x12801400 0x0 0x400>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G044_OSTM1_PCLK>;
+ resets = <&cpg R9A07G044_OSTM1_PRESETZ>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm2: timer at 12801800 {
+ compatible = "renesas,r9a07g044-ostm",
+ "renesas,ostm";
+ reg = <0x0 0x12801800 0x0 0x400>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G044_OSTM2_PCLK>;
+ resets = <&cpg R9A07G044_OSTM2_PRESETZ>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsu 0>;
+ sustainable-power = <717>;
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 0 2>;
+ contribution = <1024>;
+ };
+ };
+
+ trips {
+ sensor_crit: sensor-crit {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+
+ target: trip-point {
+ temperature = <100000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
diff --git a/arch/arm/dts/r9a07g044l2-smarc.dts b/arch/arm/dts/r9a07g044l2-smarc.dts
new file mode 100644
index 000000000000..bc2af6c92ccd
--- /dev/null
+++ b/arch/arm/dts/r9a07g044l2-smarc.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044l2.dtsi"
+#include "rzg2l-smarc-som.dtsi"
+#include "rzg2l-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+#include "rzg2l-smarc.dtsi"
+
+/ {
+ model = "Renesas SMARC EVK based on r9a07g044l2";
+ compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044";
+};
diff --git a/arch/arm/dts/r9a07g044l2.dtsi b/arch/arm/dts/r9a07g044l2.dtsi
new file mode 100644
index 000000000000..91dc10b2cdbb
--- /dev/null
+++ b/arch/arm/dts/r9a07g044l2.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L R9A07G044L2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+ compatible = "renesas,r9a07g044l2", "renesas,r9a07g044";
+};
diff --git a/arch/arm/dts/rz-smarc-common.dtsi b/arch/arm/dts/rz-smarc-common.dtsi
new file mode 100644
index 000000000000..3962d47b3e59
--- /dev/null
+++ b/arch/arm/dts/rz-smarc-common.dtsi
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/*
+ * SSI-WM8978
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer cset name='Left Input Mixer L2 Switch' on
+ * amixer cset name='Right Input Mixer R2 Switch' on
+ * amixer cset name='Headphone Playback Volume' 100
+ * amixer cset name='PCM Volume' 100%
+ * amixer cset name='Input PGA Volume' 25
+ *
+ */
+
+/ {
+ aliases {
+ serial0 = &scif0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ audio_mclock: audio_mclock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ snd_rzg2l: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&cpu_dai>;
+ simple-audio-card,frame-master = <&cpu_dai>;
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,widgets = "Microphone", "Microphone Jack";
+ simple-audio-card,routing =
+ "L2", "Mic Bias",
+ "R2", "Mic Bias",
+ "Mic Bias", "Microphone Jack";
+
+ cpu_dai: simple-audio-card,cpu {
+ };
+
+ codec_dai: simple-audio-card,codec {
+ clocks = <&audio_mclock>;
+ sound-dai = <&wm8978>;
+ };
+ };
+
+ usb0_vbus_otg: regulator-usb0-vbus-otg {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB0_VBUS_OTG";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vccq_sdhi1: regulator-vccq-sdhi1 {
+ compatible = "regulator-gpio";
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
+};
+
+&audio_clk1{
+ clock-frequency = <11289600>;
+};
+
+&audio_clk2{
+ clock-frequency = <12288000>;
+};
+
+&canfd {
+ pinctrl-0 = <&can0_pins &can1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ };
+
+ channel1 {
+ status = "okay";
+ };
+};
+
+&ehci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&ohci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&phyrst {
+ status = "okay";
+};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-1 = <&sdhi1_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&usb0_vbus_otg>;
+ status = "okay";
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi
new file mode 100644
index 000000000000..9085d8c76ce1
--- /dev/null
+++ b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+ pinctrl-0 = <&sound_clk_pins>;
+ pinctrl-names = "default";
+
+ can0_pins: can0 {
+ pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */
+ <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */
+ };
+
+ /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
+ can0-stb-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "can0_stb";
+ };
+
+ can1_pins: can1 {
+ pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */
+ <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */
+ };
+
+ /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
+ can1-stb-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "can1_stb";
+ };
+
+ i2c0_pins: i2c0 {
+ pins = "RIIC0_SDA", "RIIC0_SCL";
+ input-enable;
+ };
+
+ i2c1_pins: i2c1 {
+ pins = "RIIC1_SDA", "RIIC1_SCL";
+ input-enable;
+ };
+
+ i2c3_pins: i2c3 {
+ pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */
+ <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */
+ };
+
+ scif0_pins: scif0 {
+ pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */
+ <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */
+ };
+
+ scif2_pins: scif2 {
+ pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */
+ <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */
+ <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */
+ <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */
+ };
+
+ sd1-pwr-en-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "sd1_pwr_en";
+ };
+
+ sdhi1_pins: sd1 {
+ sd1_data {
+ pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+ power-source = <3300>;
+ };
+
+ sd1_ctrl {
+ pins = "SD1_CLK", "SD1_CMD";
+ power-source = <3300>;
+ };
+
+ sd1_mux {
+ pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+ };
+ };
+
+ sdhi1_pins_uhs: sd1_uhs {
+ sd1_data_uhs {
+ pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+ power-source = <1800>;
+ };
+
+ sd1_ctrl_uhs {
+ pins = "SD1_CLK", "SD1_CMD";
+ power-source = <1800>;
+ };
+
+ sd1_mux_uhs {
+ pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+ };
+ };
+
+ sound_clk_pins: sound_clk {
+ pins = "AUDIO_CLK1", "AUDIO_CLK2";
+ input-enable;
+ };
+
+ spi1_pins: spi1 {
+ pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
+ <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
+ <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
+ <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
+ };
+
+ ssi0_pins: ssi0 {
+ pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
+ <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
+ <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
+ <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
+ };
+
+ usb0_pins: usb0 {
+ pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
+ <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
+ <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
+ };
+
+ usb1_pins: usb1 {
+ pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
+ <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
+ };
+};
+
diff --git a/arch/arm/dts/rzg2l-smarc-som.dtsi b/arch/arm/dts/rzg2l-smarc-som.dtsi
new file mode 100644
index 000000000000..fbbb4f03440b
--- /dev/null
+++ b/arch/arm/dts/rzg2l-smarc-som.dtsi
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */
+#define EMMC 1
+
+/*
+ * To enable uSD card on CN3,
+ * SW1[2] should be at position 3/ON.
+ * Disable eMMC by setting "#define EMMC 0" above.
+ */
+#define SDHI (!EMMC)
+
+/ {
+ aliases {
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+ };
+
+ memory at 48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_1p1v: regulator-vdd-core {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ states = <3300000 1>, <1800000 0>;
+ regulator-boot-on;
+ gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ };
+};
+
+&adc {
+ pinctrl-0 = <&adc_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /delete-node/ channel at 6;
+ /delete-node/ channel at 7;
+};
+
+ð0 {
+ pinctrl-0 = <ð0_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ phy0: ethernet-phy at 7 {
+ compatible = "ethernet-phy-id0022.1640",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ interrupt-parent = <&irqc>;
+ interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
+ rxc-skew-psec = <2400>;
+ txc-skew-psec = <2400>;
+ rxdv-skew-psec = <0>;
+ txdv-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
+};
+
+ð1 {
+ pinctrl-0 = <ð1_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ phy1: ethernet-phy at 7 {
+ compatible = "ethernet-phy-id0022.1640",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ interrupt-parent = <&irqc>;
+ interrupts = <RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>;
+ rxc-skew-psec = <2400>;
+ txc-skew-psec = <2400>;
+ rxdv-skew-psec = <0>;
+ txdv-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <24000000>;
+};
+
+&gpu {
+ mali-supply = <®_1p1v>;
+};
+
+&ostm1 {
+ status = "okay";
+};
+
+&ostm2 {
+ status = "okay";
+};
+
+&pinctrl {
+ adc_pins: adc {
+ pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */
+ };
+
+ eth0_pins: eth0 {
+ pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
+ <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+ <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+ <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
+ <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+ <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+ <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+ <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+ <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+ <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+ <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+ <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+ <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+ <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+ <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
+ <RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */
+ };
+
+ eth1_pins: eth1 {
+ pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */
+ <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */
+ <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */
+ <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */
+ <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */
+ <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */
+ <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */
+ <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */
+ <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */
+ <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */
+ <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */
+ <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
+ <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
+ <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
+ <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */
+ <RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */
+ };
+
+ gpio-sd0-pwr-en-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(4, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "gpio_sd0_pwr_en";
+ };
+
+ qspi0_pins: qspi0 {
+ qspi0-data {
+ pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
+ power-source = <1800>;
+ };
+
+ qspi0-ctrl {
+ pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
+ power-source = <1800>;
+ };
+ };
+
+ /*
+ * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
+ * The below switch logic can be used to select the device between
+ * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT.
+ * SW1[2] should be at position 2/OFF to enable 64 GB eMMC
+ * SW1[2] should be at position 3/ON to enable uSD card CN3
+ */
+ sd0-dev-sel-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(41, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "sd0_dev_sel";
+ };
+
+ sdhi0_emmc_pins: sd0emmc {
+ sd0_emmc_data {
+ pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+ "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+ power-source = <1800>;
+ };
+
+ sd0_emmc_ctrl {
+ pins = "SD0_CLK", "SD0_CMD";
+ power-source = <1800>;
+ };
+
+ sd0_emmc_rst {
+ pins = "SD0_RST#";
+ power-source = <1800>;
+ };
+ };
+
+ sdhi0_pins: sd0 {
+ sd0_data {
+ pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+ power-source = <3300>;
+ };
+
+ sd0_ctrl {
+ pins = "SD0_CLK", "SD0_CMD";
+ power-source = <3300>;
+ };
+
+ sd0_mux {
+ pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
+ };
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ sd0_data_uhs {
+ pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+ power-source = <1800>;
+ };
+
+ sd0_ctrl_uhs {
+ pins = "SD0_CLK", "SD0_CMD";
+ power-source = <1800>;
+ };
+
+ sd0_mux_uhs {
+ pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
+ };
+ };
+};
+
+&sbc {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash at 0 {
+ compatible = "micron,mt25qu512a", "jedec,spi-nor";
+ reg = <0>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot at 0 {
+ reg = <0x00000000 0x2000000>;
+ read-only;
+ };
+ user at 2000000 {
+ reg = <0x2000000 0x2000000>;
+ };
+ };
+ };
+};
+
+#if SDHI
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+#endif
+
+#if EMMC
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_emmc_pins>;
+ pinctrl-1 = <&sdhi0_emmc_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ fixed-emmc-driver-type = <1>;
+ status = "okay";
+};
+#endif
+
+&wdt0 {
+ status = "okay";
+ timeout-sec = <60>;
+};
+
+&wdt1 {
+ status = "okay";
+ timeout-sec = <60>;
+};
diff --git a/arch/arm/dts/rzg2l-smarc.dtsi b/arch/arm/dts/rzg2l-smarc.dtsi
new file mode 100644
index 000000000000..2a158a954b2f
--- /dev/null
+++ b/arch/arm/dts/rzg2l-smarc.dtsi
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0 1
+
+/ {
+ aliases {
+ serial1 = &scif2;
+ i2c3 = &i2c3;
+ };
+
+ osc1: cec-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "d";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7535_out>;
+ };
+ };
+ };
+};
+
+&cpu_dai {
+ sound-dai = <&ssi0>;
+};
+
+&dsi {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&adv7535_in>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ adv7535: hdmi at 3d {
+ compatible = "adi,adv7535";
+ reg = <0x3d>;
+
+ interrupt-parent = <&pinctrl>;
+ interrupts = <RZG2L_GPIO(2, 1) IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&osc1>;
+ clock-names = "cec";
+ avdd-supply = <®_1p8v>;
+ dvdd-supply = <®_1p8v>;
+ pvdd-supply = <®_1p8v>;
+ a2vdd-supply = <®_1p8v>;
+ v3p3-supply = <®_3p3v>;
+ v1p2-supply = <®_1p8v>;
+
+ adi,dsi-lanes = <4>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7535_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ adv7535_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ wm8978: codec at 1a {
+ compatible = "wlf,wm8978";
+ #sound-dai-cells = <0>;
+ reg = <0x1a>;
+ };
+};
+
+/*
+ * To enable SCIF2 (SER0) on PMOD1 (CN7)
+ * SW1 should be at position 2->3 so that SER0_CTS# line is activated
+ * SW2 should be at position 2->3 so that SER0_TX line is activated
+ * SW3 should be at position 2->3 so that SER0_RX line is activated
+ * SW4 should be at position 2->3 so that SER0_RTS# line is activated
+ */
+#if PMOD1_SER0
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+#endif
+
+&ssi0 {
+ pinctrl-0 = <&ssi0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&vccq_sdhi1 {
+ gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+};
--
2.39.2
More information about the U-Boot
mailing list