[PATCH 2/4] rockchip: rk3588-rock-5b: Enable support for PCIe SATA cards

[Kever Yang]

On 2023/10/11 06:23, Jonas Karlman wrote:
> Enable support for PCIe SATA cards and the on-board SATA controller.
>
> This also revert use of CONFIG_PCI_INIT_R in order to speed up boot from
> eMMC or SD-cards. Standard boot will initialize pci after faster boot
> media have been enumerated.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> Cc: Christopher Obbard <chris.obbard at collabora.com>
> ---
>   configs/rock5b-rk3588_defconfig | 6 +++++-
>   1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig
> index 447913faccc4..ec22e70033a0 100644
> --- a/configs/rock5b-rk3588_defconfig
> +++ b/configs/rock5b-rk3588_defconfig
> @@ -26,6 +26,7 @@ CONFIG_SPL_SPI=y
>   CONFIG_SYS_LOAD_ADDR=0xc00800
>   CONFIG_PCI=y
>   CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
>   CONFIG_FIT=y
>   CONFIG_FIT_VERBOSE=y
>   CONFIG_SPL_FIT_SIGNATURE=y
> @@ -35,7 +36,6 @@ CONFIG_OF_BOARD_SETUP=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-rock-5b.dtb"
>   # CONFIG_DISPLAY_CPUINFO is not set
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_PCI_INIT_R=y
>   CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
>   CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> @@ -63,6 +63,8 @@ CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigne
>   CONFIG_SPL_DM_SEQ_ALIAS=y
>   CONFIG_SPL_REGMAP=y
>   CONFIG_SPL_SYSCON=y
> +CONFIG_AHCI_PCI=y
> +CONFIG_DWC_AHCI=y
>   CONFIG_SPL_CLK=y
>   # CONFIG_USB_FUNCTION_FASTBOOT is not set
>   CONFIG_ROCKCHIP_GPIO=y
> @@ -89,6 +91,8 @@ CONFIG_SPL_PINCTRL=y
>   CONFIG_REGULATOR_PWM=y
>   CONFIG_PWM_ROCKCHIP=y
>   CONFIG_SPL_RAM=y
> +CONFIG_SCSI=y
> +CONFIG_DM_SCSI=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYS_NS16550_MEM32=y