[PATCH 09/26] spl: Allow enabling SPL_OF_REAL and SPL_OF_PLATDATA at the same time

Sean Anderson seanga2 at gmail.com
Thu Oct 12 06:22:25 CEST 2023


On 10/11/23 23:41, Simon Glass wrote:
> Hi Sean,
> 
> On Wed, 11 Oct 2023 at 18:56, Sean Anderson <seanga2 at gmail.com> wrote:
>>
>> Sandbox unit tests in U-Boot proper load a test device tree to have some
>> devices to work with. In order to do the same in SPL, we must enable
>> SPL_OF_REAL. However, we already have SPL_OF_PLATDATA enabled. When
>> generating platdata from a devicetree, it is expected that we will not need
>> devicetree access functions (even though SPL_OF_CONTROL is enabled). This
>> expectation does not hold for sandbox, so allow user control of
>> SPL_OF_REAL.
>>
>> There are several places in the tree where conditions involving OF_PLATDATA
>> or OF_REAL no longer function correctly when both of these options can be
>> selected at the same time. Adjust these conditions accordingly.
>>
>> Signed-off-by: Sean Anderson <seanga2 at gmail.com>
>> ---
>>
>>   drivers/core/Makefile               | 1 +
>>   drivers/i2c/i2c-emul-uclass.c       | 2 +-
>>   drivers/serial/sandbox.c            | 2 +-
>>   drivers/sysreset/sysreset_sandbox.c | 2 +-
>>   dts/Kconfig                         | 8 +++++---
>>   test/test-main.c                    | 2 +-
>>   6 files changed, 10 insertions(+), 7 deletions(-)
> 
> Reviewed-by: Simon Glass <sjg at chromium.org>
> 
> with a due sense of foreboding
> 
> I wonder whether this might create confusion?

Yeah, I was a bit worried about that as well.

>>
>> diff --git a/drivers/core/Makefile b/drivers/core/Makefile
>> index bce0a3f65cb..acbd2bf2cef 100644
>> --- a/drivers/core/Makefile
>> +++ b/drivers/core/Makefile
>> @@ -15,6 +15,7 @@ obj-$(CONFIG_$(SPL_)OF_LIVE) += of_access.o of_addr.o
>>   ifndef CONFIG_DM_DEV_READ_INLINE
>>   obj-$(CONFIG_OF_CONTROL) += read.o
>>   endif
>> +obj-$(CONFIG_$(SPL_)OF_PLATDATA) += read.o
>>   obj-$(CONFIG_OF_CONTROL) += of_extra.o ofnode.o read_extra.o
>>
>>   ccflags-$(CONFIG_DM_DEBUG) += -DDEBUG
>> diff --git a/drivers/i2c/i2c-emul-uclass.c b/drivers/i2c/i2c-emul-uclass.c
>> index 1107cf309fc..d421ddfcbe2 100644
>> --- a/drivers/i2c/i2c-emul-uclass.c
>> +++ b/drivers/i2c/i2c-emul-uclass.c
>> @@ -46,7 +46,7 @@ int i2c_emul_find(struct udevice *dev, struct udevice **emulp)
>>          struct udevice *emul;
>>          int ret;
>>
>> -       if (!CONFIG_IS_ENABLED(OF_PLATDATA)) {
>> +       if (CONFIG_IS_ENABLED(OF_REAL)) {
>>                  ret = uclass_find_device_by_phandle(UCLASS_I2C_EMUL, dev,
>>                                                      "sandbox,emul", &emul);
>>          } else {
>> diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c
>> index f4003811ee7..f6ac3d22852 100644
>> --- a/drivers/serial/sandbox.c
>> +++ b/drivers/serial/sandbox.c
>> @@ -280,7 +280,7 @@ U_BOOT_DRIVER(sandbox_serial) = {
>>          .flags = DM_FLAG_PRE_RELOC,
>>   };
>>
>> -#if CONFIG_IS_ENABLED(OF_REAL)
>> +#if CONFIG_IS_ENABLED(OF_REAL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
>>   static const struct sandbox_serial_plat platdata_non_fdt = {
>>          .colour = -1,
>>   };
>> diff --git a/drivers/sysreset/sysreset_sandbox.c b/drivers/sysreset/sysreset_sandbox.c
>> index 3750c60b9b9..f485a135299 100644
>> --- a/drivers/sysreset/sysreset_sandbox.c
>> +++ b/drivers/sysreset/sysreset_sandbox.c
>> @@ -132,7 +132,7 @@ U_BOOT_DRIVER(warm_sysreset_sandbox) = {
>>          .ops            = &sandbox_warm_sysreset_ops,
>>   };
>>
>> -#if CONFIG_IS_ENABLED(OF_REAL)
>> +#if CONFIG_IS_ENABLED(OF_REAL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
>>   /* This is here in case we don't have a device tree */
>>   U_BOOT_DRVINFO(sysreset_sandbox_non_fdt) = {
>>          .name = "sysreset_sandbox",
>> diff --git a/dts/Kconfig b/dts/Kconfig
>> index 9152f5885e9..c6fb193ca89 100644
>> --- a/dts/Kconfig
>> +++ b/dts/Kconfig
>> @@ -410,12 +410,14 @@ config SPL_OF_PLATDATA
>>            declarations for each node. See of-plat.txt for more information.
>>
>>   config SPL_OF_REAL
>> -       bool
>> +       bool "Support a real devicetree in SPL"
> 
> To avoid the user doing something silly, I wonder if it would be
> better to keep this option hidden, but enable it for sandbox_spl via
> Kconfig?

So

	visible if SANDBOX

?

>> +       depends on SPL_OF_CONTROL
>> +       select SPL_OF_LIBFDT
>>          help
>>            Indicates that a real devicetree is available which can be accessed
>>            at runtime. This means that dev_read_...() functions can be used to
>> -         read data from the devicetree for each device. This is true if
>> -         SPL_OF_CONTROL is enabled and not SPL_OF_PLATDATA
>> +         read data from the devicetree for each device. You do not need to
>> +         enable this option if you have enabled SPL_OF_PLATDATA.
>>
>>   if SPL_OF_PLATDATA
>>
>> diff --git a/test/test-main.c b/test/test-main.c
>> index edb20bc4b9c..b7015d9f38d 100644
>> --- a/test/test-main.c
>> +++ b/test/test-main.c
>> @@ -303,7 +303,7 @@ static int test_pre_run(struct unit_test_state *uts, struct unit_test *test)
>>          if (test->flags & UT_TESTF_PROBE_TEST)
>>                  ut_assertok(do_autoprobe(uts));
>>
>> -       if (!CONFIG_IS_ENABLED(OF_PLATDATA) &&
>> +       if (CONFIG_IS_ENABLED(OF_REAL) &&
>>              (test->flags & UT_TESTF_SCAN_FDT)) {
>>                  /*
>>                   * only set this if we know the ethernet uclass will be created
>> --
>> 2.37.1
>>
> 
> Regards,
> Simon



More information about the U-Boot mailing list