[PATCH 5/6] board: gateworks: venice: add imx8mm-gw7905-0x support

[sbabic at denx.de]

> The Gateworks imx8mm-venice-gw7905-0x consists of a SOM + baseboard.
> The GW700x SOM contains the following:
>  - i.MX8M Mini SoC
>  - LPDDR4 memory
>  - eMMC Boot device
>  - Gateworks System Controller (GSC) with integrated EEPROM, button
>    controller, and ADC's
>  - RGMII PHY
>  - PMIC
>  - SOM connector providing:
>   - FEC GbE MII
>   - 1x SPI
>   - 2x I2C
>   - 4x UART
>   - 2x USB 2.0
>   - 1x PCI
>   - 1x SDIO (4-bit 3.3V)
>   - 1x SDIO (4-bit 3.3V/1.8V)
>   - GPIO
> The GW7905 Baseboard contains the following:
>  - GPS
>  - microSD
>  - off-board I/O connector with I2C, SPI, GPIO
>  - EERPOM
>  - PCIe clock generator
>  - 1x full-length miniPCIe socket with PCI/USB3 (via mux) and USB2.0
>  - 1x half-length miniPCIe socket with USB2.0 and USB3.0
>  - USB 3.0 HUB
>  - USB Type-C with USB PD Sink capability and peripheral support
>  - USB Type-C with USB 3.0 host support
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================