[PATCH v2 5/7] arm64: dts: imx8mp: Add DT overlay describing i.MX8MP DHCOM SoM rev.100
Marek Vasut
marex at denx.de
Mon Oct 16 14:50:06 CEST 2023
The current imx8mp-dhcom-som.dtsi describes production rev.200 SoM,
add DT overlay which reinstates rev.100 SoM description to permit
prototype rev.100 SoMs to be used until they get phased out.
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
Cc: Algapally Santosh Sagar <santoshsagar.algapally at amd.com>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Mayuresh Chitale <mchitale at ventanamicro.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov at foundries.io>
Cc: Ovidiu Panait <ovpanait at gmail.com>
Cc: Roger Quadros <rogerq at kernel.org>
Cc: Simon Glass <sjg at chromium.org>
Cc: Stefano Babic <sbabic at denx.de>
Cc: u-boot at dh-electronics.com
---
V2: Rebase and collect the patches in one series
---
arch/arm/dts/Makefile | 2 +
.../dts/imx8mp-dhcom-pdk3-overlay-rev100.dts | 10 ++
.../dts/imx8mp-dhcom-som-overlay-rev100.dts | 120 ++++++++++++++++++
arch/arm/dts/imx8mp-dhcom-u-boot.dtsi | 8 +-
board/dhelectronics/dh_imx8mp/spl.c | 16 +++
5 files changed, 152 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/dts/imx8mp-dhcom-pdk3-overlay-rev100.dts
create mode 100644 arch/arm/dts/imx8mp-dhcom-som-overlay-rev100.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 16494a7f1b8..fbd7217feb4 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1063,11 +1063,13 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
imx8mq-phanbell.dtb \
imx8mp-beacon-kit.dtb \
imx8mp-data-modul-edm-sbc.dtb \
+ imx8mp-dhcom-som-overlay-rev100.dtbo \
imx8mp-dhcom-som-overlay-eth1xfast.dtbo \
imx8mp-dhcom-som-overlay-eth2xfast.dtbo \
imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo \
imx8mp-dhcom-pdk2.dtb \
imx8mp-dhcom-pdk3.dtb \
+ imx8mp-dhcom-pdk3-overlay-rev100.dtbo \
imx8mp-evk.dtb \
imx8mp-icore-mx8mp-edimm2.2.dtb \
imx8mp-msc-sm2s.dtb \
diff --git a/arch/arm/dts/imx8mp-dhcom-pdk3-overlay-rev100.dts b/arch/arm/dts/imx8mp-dhcom-pdk3-overlay-rev100.dts
new file mode 100644
index 00000000000..f27e6429abe
--- /dev/null
+++ b/arch/arm/dts/imx8mp-dhcom-pdk3-overlay-rev100.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2023 Marek Vasut <marex at denx.de>
+ */
+/dts-v1/;
+/plugin/;
+
+ðphy0g {
+ reg = <7>;
+};
diff --git a/arch/arm/dts/imx8mp-dhcom-som-overlay-rev100.dts b/arch/arm/dts/imx8mp-dhcom-som-overlay-rev100.dts
new file mode 100644
index 00000000000..5d9a00c9429
--- /dev/null
+++ b/arch/arm/dts/imx8mp-dhcom-som-overlay-rev100.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2023 Marek Vasut <marex at denx.de>
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "imx8mp-pinfunc.h"
+
+&brcmf {
+ reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+};
+
+&eeprom0 { /* EEPROM with EQoS MAC address */
+ compatible = "atmel,24c02";
+ pagesize = <16>;
+};
+
+&eeprom1 { /* EEPROM with FEC MAC address */
+ compatible = "atmel,24c02";
+ pagesize = <16>;
+};
+
+ðphy0f { /* SMSC LAN8740Ai */
+ pinctrl-0 = <&pinctrl_ethphy0 &pinctrl_ioexp>;
+ reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+};
+
+ðphy0g { /* Micrel KSZ9131RNXI */
+ pinctrl-0 = <&pinctrl_ethphy0 &pinctrl_ioexp>;
+ reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+};
+
+&i2c3 {
+ adc at 48 {
+ compatible = "ti,tla2024";
+ interrupts-extended;
+ };
+};
+
+&ioexp {
+ status = "disabled";
+};
+
+®_eth_vio {
+ gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pinctrl_enet_vio>;
+ pinctrl-names = "default";
+};
+
+&rv3032 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&uart2 {
+ bluetooth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_bt>;
+ shutdown-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&usb_dwc3_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_vbus>;
+};
+
+&usdhc1 {
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_wl_reg_en>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_usdhc1_wl_reg_en>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_usdhc1_wl_reg_en>;
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_hog_base
+ &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+ &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+ &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
+ &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+ /* GPIO_M is connected to CLKOUT2 */
+ &pinctrl_dhcom_int>;
+
+ pinctrl_enet_vio: dhcom-enet-vio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22
+ >;
+ };
+
+ pinctrl_rtc: dhcom-rtc-grp {
+ fsl,pins = <
+ /* RTC_#INT Interrupt */
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x400001c6
+ >;
+ };
+
+ pinctrl_uart2_bt: dhcom-uart2-bt-grp {
+ fsl,pins = <
+ /* BT_REG_EN */
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
+ >;
+ };
+
+ pinctrl_usb0_vbus: dhcom-usb0-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0
+ >;
+ };
+
+ pinctrl_usdhc1_wl_reg_en: dhcom-usdhc1-wl-reg-en-grp {
+ fsl,pins = <
+ /* WL_REG_EN */
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
index 6f21fbe1151..a29db0ddd3f 100644
--- a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
@@ -178,13 +178,13 @@
};
};
- fdt-dto-imx8mp-dhcom-pdk-overlay-rev100 {
- description = "imx8mp-dhcom-pdk-overlay-rev100";
+ fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100 {
+ description = "imx8mp-dhcom-pdk3-overlay-rev100";
type = "flat_dt";
compression = "none";
blob-ext {
- filename = "imx8mp-dhcom-pdk-overlay-rev100.dtbo";
+ filename = "imx8mp-dhcom-pdk3-overlay-rev100.dtbo";
};
};
};
@@ -198,7 +198,7 @@
"fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast",
"fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast",
"fdt-dto-imx8mp-dhcom-som-overlay-rev100",
- "fdt-dto-imx8mp-dhcom-pdk-overlay-rev100";
+ "fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100";
};
};
};
diff --git a/board/dhelectronics/dh_imx8mp/spl.c b/board/dhelectronics/dh_imx8mp/spl.c
index 8dc464b1dd7..1b05da53c35 100644
--- a/board/dhelectronics/dh_imx8mp/spl.c
+++ b/board/dhelectronics/dh_imx8mp/spl.c
@@ -44,6 +44,7 @@ static const iomux_v3_cfg_t wdog_pads[] = {
};
static bool dh_gigabit_eqos, dh_gigabit_fec;
+static u8 dh_som_rev;
static void dh_imx8mp_early_init_f(void)
{
@@ -166,6 +167,15 @@ int board_spl_fit_append_fdt_skip(const char *name)
}
}
+ if (dh_som_rev == 0x0) { /* Prototype SoM rev.100 */
+ if (!strcmp(name, "fdt-dto-imx8mp-dhcom-som-overlay-rev100"))
+ return 0;
+
+ if (!strcmp(name, "fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100") &&
+ of_machine_is_compatible("dh,imx8mp-dhcom-pdk3"))
+ return 0;
+ }
+
return 1; /* Skip this DTO */
}
@@ -175,6 +185,9 @@ static void dh_imx8mp_board_cache_config(void)
const u32 mux_sion[] = {
FIELD_GET(MUX_CTRL_OFS_MASK, MX8MP_PAD_ENET_RX_CTL__GPIO1_IO24),
FIELD_GET(MUX_CTRL_OFS_MASK, MX8MP_PAD_SAI1_TXFS__GPIO4_IO10),
+ FIELD_GET(MUX_CTRL_OFS_MASK, MX8MP_PAD_NAND_DQS__GPIO3_IO14),
+ FIELD_GET(MUX_CTRL_OFS_MASK, MX8MP_PAD_SAI1_TXD7__GPIO4_IO19),
+ FIELD_GET(MUX_CTRL_OFS_MASK, MX8MP_PAD_SAI5_MCLK__GPIO3_IO25),
};
int i;
@@ -183,6 +196,9 @@ static void dh_imx8mp_board_cache_config(void)
dh_gigabit_eqos = !(readl(GPIO1_BASE_ADDR) & BIT(24));
dh_gigabit_fec = !(readl(GPIO4_BASE_ADDR) & BIT(10));
+ dh_som_rev = !!(readl(GPIO3_BASE_ADDR) & BIT(14));
+ dh_som_rev |= !!(readl(GPIO4_BASE_ADDR) & BIT(19)) << 1;
+ dh_som_rev |= !!(readl(GPIO3_BASE_ADDR) & BIT(25)) << 2;
for (i = 0; i < ARRAY_SIZE(mux_sion); i++)
clrbits_le32(mux_base + mux_sion[i], IOMUX_CONFIG_SION);
--
2.42.0
More information about the U-Boot
mailing list