[PATCH 4/5] arm64: dts: imx8mp: Drop i.MX8MP DHCOM rev.100 PHY address workaround from PDK3 DT

sbabic at denx.de sbabic at denx.de
Mon Oct 16 18:46:08 CEST 2023


> In case the i.MX8MP DHCOM rev.100 has been populated on the PDK3
> carrier board, the on-SoM PHY PHYAD1 signal has been pulled high
> by the carrier board and changed the PHY MDIO address from 5 to 7.
> This has been fixed on production rev.200 SoM by additional buffer
> on the SoM PHYAD/LED signals, remove the workaround.
> Signed-off-by: Marek Vasut <marex at denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list