[PATCH] arm64: zynqmp: Introduce kria SOM defconfig
Venkatesh Yadav Abbarapu
venkatesh.abbarapu at amd.com
Tue Oct 17 05:17:19 CEST 2023
Enable the initial kria SOM specific configurations like pinctrl,
pinconf etc. Also add the environment file.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
---
board/xilinx/zynqmp/zynqmp_kria.env | 71 +++++++++
configs/xilinx_zynqmp_kria_defconfig | 230 +++++++++++++++++++++++++++
2 files changed, 301 insertions(+)
create mode 100644 board/xilinx/zynqmp/zynqmp_kria.env
create mode 100644 configs/xilinx_zynqmp_kria_defconfig
diff --git a/board/xilinx/zynqmp/zynqmp_kria.env b/board/xilinx/zynqmp/zynqmp_kria.env
new file mode 100644
index 0000000000..916ac2df14
--- /dev/null
+++ b/board/xilinx/zynqmp/zynqmp_kria.env
@@ -0,0 +1,71 @@
+autoload=no
+baudrate=115200
+boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
+boot_efi_binary=if fdt addr ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr ${fdtcontroladdr};fi;load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
+boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
+boot_net_usb_start=usb start
+boot_prefixes=/ /boot/
+boot_script_dhcp=boot.scr.uimg
+boot_scripts=boot.scr.uimg boot.scr
+boot_syslinux_conf=extlinux/extlinux.conf
+bootcmd_dhcp=run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
+bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;
+bootcmd_mmc0=devnum=0; run mmc_boot
+bootcmd_mmc1=devnum=1; run mmc_boot
+bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
+bootcmd_usb0=devnum=0; run usb_boot
+bootcmd_usb1=devnum=1; run usb_boot
+bootcmd_usb2=devnum=2; run usb_boot
+bootcmd_usb3=devnum=3; run usb_boot
+bootdelay=2
+bootfstype=fat
+bootm_low=0
+bootm_size=80000000
+distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done
+efi_dtb_prefixes=/ /dtb/ /dtb/current/
+fdt_addr_r=0x40000000
+fdt_high=0x10000000
+fileaddr=0x18000000
+initrd_high=0x79000000
+kernel_addr_r=0x18000000
+load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
+mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
+pxefile_addr_r=0x10000000
+ramdisk_addr_r=0x02100000
+scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
+scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done; setenv devplist
+scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
+scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
+scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
+script_offset_f=0x3e80000
+script_size_f=0x80000
+scriptaddr=0x20000000
+usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi
+preboot=setenv boot_targets; setenv modeboot; cls; run board_setup
+
+# SOM specific boot methods
+som_cc_boot=if test ${card1_name} = SCK-KV-G; then setenv boot_targets mmc1 usb0 usb1 usb2 usb3 pxe dhcp && run distro_bootcmd; elif test ${card1_name} = SCK-KR-G; then setenv boot_targets usb0 usb1 usb2 usb3 pxe dhcp && run distro_bootcmd; else test ${card1_name} = SCK-KD-G; setenv boot_targets usb0 usb1 usb2 usb3 pxe dhcp && run distro_bootcmd; fi;"
+som_mmc_boot=setenv boot_targets mmc0 && run distro_bootcmd
+
+k26_starter=SMK-K26-XCL2G
+k24_starter=SMK-K24-XCL2G
+bootcmd=setenv model $board_name && if setexpr model gsub .*$k24_starter* $k24_starter || setexpr model gsub .*$k26_starter* $k26_starter; then run som_cc_boot; else run som_mmc_boot; run som_cc_boot; fi
+
+usb_hub_init=mw 1000 0056 && sleep 1 && i2c write 1000 2d aa 2 -s
+
+# usb hub init
+kv260_setup=i2c dev 1 && run usb_hub_init
+# usb hub init
+kr260_setup=i2c dev 1 && run usb_hub_init; i2c dev 2 && run usb_hub_init;
+# usb hub init with enabling PM nodes for ...
+kd240_setup=i2c dev 0 && run usb_hub_init; run pm-cfg-snd
+
+
+board_setup=\
+if test ${card1_name} = SCK-KV-G; then run kv260_setup; fi;\
+if test ${card1_name} = SCK-KR-G; then run kr260_setup; fi;\
+if test ${card1_name} = SCK-KD-G; then run kd240_setup; fi;
+
+pm-cfg-snd=run pm-config
+
+pm-config=if test ${card1_name} = SCK-KD-G; then zynqmp pmufw node 33; zynqmp pmufw node 47; fi
diff --git a/configs/xilinx_zynqmp_kria_defconfig b/configs/xilinx_zynqmp_kria_defconfig
new file mode 100644
index 0000000000..486ed14c3a
--- /dev/null
+++ b/configs/xilinx_zynqmp_kria_defconfig
@@ -0,0 +1,230 @@
+CONFIG_ARM=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_TEXT_BASE=0x8000000
+CONFIG_SYS_MALLOC_LEN=0x4040000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-smk-k26-revA"
+CONFIG_SPL_STACK_R_ADDR=0x18000000
+CONFIG_SPL_SIZE_LIMIT=0x2a000
+CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0
+CONFIG_SPL=y
+CONFIG_ENV_OFFSET_REDUND=0x222000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_CMD_FRU=y
+CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_ENV_ADDR=0x2200000
+CONFIG_AHCI=y
+CONFIG_SYS_MEMTEST_START=0x00000000
+CONFIG_SYS_MEMTEST_END=0x00001000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_USE_PREBOOT=y
+CONFIG_SYS_DEVICE_NULLDEV=y
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_CLOCKS=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xfffffffc
+CONFIG_SPL_STACK_R=y
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20000000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000
+CONFIG_SPL_FS_LOAD_KERNEL_NAME=""
+CONFIG_SPL_FS_LOAD_ARGS_NAME=""
+CONFIG_SPL_FPGA=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x8000000
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0xF80000
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=2073
+CONFIG_SYS_BOOTM_LEN=0x6400000
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADP=y
+CONFIG_CMD_FPGA_LOAD_SECURE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_PWM=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_SDRAM=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_BOOTP_MAY_FAIL=y
+CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_RTC=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_GETTIME=y
+CONFIG_CMD_RNG=y
+CONFIG_CMD_KASLRSEED=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_TPM=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_SQUASHFS=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_MTDPARTS_SPREAD=y
+CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
+CONFIG_CMD_UBI=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_BOARD=y
+CONFIG_OF_LIST=""
+CONFIG_DTB_RESELECT=y
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent interrupts iommus power-domains"
+CONFIG_ENV_SOURCE_FILE="zynqmp_kria"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_ENV_FAT_DEVICE_AND_PART=":auto"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SATA=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SATA_CEVA=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_CLK_ZYNQMP=y
+CONFIG_DFU_TFTP=y
+CONFIG_DFU_TIMEOUT=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_MTD=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1800000
+CONFIG_DMA=y
+CONFIG_XILINX_DPDMA=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_FPGA_XILINX=y
+CONFIG_FPGA_ZYNQMPPL=y
+CONFIG_GPIO_HOG=y
+CONFIG_XILINX_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_SLG7XL45106_I2C_GPO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CADENCE=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_ADIN=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_PHY_XILINX_GMII2RGMII=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_PHY_GIGE=y
+CONFIG_XILINX_AXIEMAC=y
+CONFIG_ZYNQ_GEM=y
+CONFIG_PHY=y
+CONFIG_PHY_XILINX_ZYNQMP=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_ZYNQMP_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_CADENCE_TTC=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_ZYNQMP=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_EMULATION=y
+CONFIG_RTC_ZYNQMP=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_ARM_DCC=y
+CONFIG_XILINX_UARTLITE=y
+CONFIG_ZYNQ_SERIAL=y
+CONFIG_SOC_XILINX_ZYNQMP=y
+CONFIG_SPI=y
+CONFIG_ZYNQ_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_CMD_POWEROFF=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_TPM2_TIS_SPI=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
+CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_LOGO is not set
+CONFIG_VIDEO_COPY=y
+CONFIG_I2C_EDID=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_PANIC_HANG=y
+CONFIG_TPM=y
+CONFIG_SPL_GZIP=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
--
2.17.1
More information about the U-Boot
mailing list