[PATCH] phy: meson-g12a-usb2: fix ret check on power_domain_get

[Mattijs Korpershoek]

On mar., oct. 17, 2023 at 20:57, "Guillaume La Roque" <glaroque at baylibre.com> wrote:

> Patch which add A1 SoC support create a regression on khadas vim3/vim3l
> boards when we try to use fastboot command:
>
>   => fastboot usb 0
>   failed to get power domain
>   failed to get power domain
>   No USB device found
>   USB init failed: -19
>
> Add ENOENT check on ret in probe function.
>
> Fixes: 5533c883ce10 ("phy: support Amlogic A1 family")
>
> Signed-off-by: Guillaume La Roque <glaroque at baylibre.com>

Tested on vim3 with:

=> fastboot usb 0

Tested-by: Mattijs Korpershoek <mkorpershoek at baylibre.com> # on vim3

> ---
>  drivers/phy/meson-g12a-usb2.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/phy/meson-g12a-usb2.c b/drivers/phy/meson-g12a-usb2.c
> index 4ba3992bda70..3958d2404b85 100644
> --- a/drivers/phy/meson-g12a-usb2.c
> +++ b/drivers/phy/meson-g12a-usb2.c
> @@ -328,12 +328,12 @@ int meson_g12a_usb2_phy_probe(struct udevice *dev)
>  
>  #if CONFIG_IS_ENABLED(POWER_DOMAIN)
>  	ret = power_domain_get(dev, &priv->pwrdm);
> -	if (ret < 0 && ret != -ENODEV) {
> -		pr_err("failed to get power domain\n");
> +	if (ret < 0 && ret != -ENODEV && ret != -ENOENT) {
> +		pr_err("failed to get power domain : %d\n", ret);
>  		return ret;
>  	}
>  
> -	if (ret != -ENODEV) {
> +	if (ret != -ENODEV && ret != -ENOENT) {
>  		ret = power_domain_on(&priv->pwrdm);
>  		if (ret < 0) {
>  			pr_err("failed to enable power domain\n");
> -- 
> 2.34.1
>
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#1773): https://groups.io/g/u-boot-amlogic/message/1773
> Mute This Topic: https://groups.io/mt/102024645/1991006
> Group Owner: u-boot-amlogic+owner at groups.io
> Unsubscribe: https://groups.io/g/u-boot-amlogic/unsub [mkorpershoek at baylibre.com]
> -=-=-=-=-=-=-=-=-=-=-=-