[PATCH v4] imx8mp-dhcom-pdk3-overlay-rev100: Pass #address-cells/size-cells

Marek Vasut marex at denx.de
Wed Oct 18 21:00:59 CEST 2023


On 10/18/23 20:55, Fabio Estevam wrote:
> From: Fabio Estevam <festevam at denx.de>
> 
> Pass #address-cells/size-cells in the mdio node to avoid the following
> DTC warning:
> 
>    DTCO    arch/arm/dts/imx8mp-dhcom-pdk3-overlay-rev100.dtbo
> Warning (reg_format): /fragment at 0/__overlay__:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): /fragment at 0/__overlay__: Relying on default #address-cells value
> Warning (avoid_default_addr_size): /fragment at 0/__overlay__: Relying on default #size-cells value
> 
> Also change the Ethernet PHY address to 5, as per Marek's feedback.
> 
> Signed-off-by: Fabio Estevam <festevam at denx.de>
> ---
> Changes since v3:
> - Change the Ethernet PHY address to 5 for good :-). (Marek)
> 
>   arch/arm/dts/imx8mp-dhcom-pdk3-overlay-rev100.dts | 11 +++++++++--
>   1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/dts/imx8mp-dhcom-pdk3-overlay-rev100.dts b/arch/arm/dts/imx8mp-dhcom-pdk3-overlay-rev100.dts
> index f27e6429abe4..bad015536166 100644
> --- a/arch/arm/dts/imx8mp-dhcom-pdk3-overlay-rev100.dts
> +++ b/arch/arm/dts/imx8mp-dhcom-pdk3-overlay-rev100.dts
> @@ -5,6 +5,13 @@
>   /dts-v1/;
>   /plugin/;
>   
> -&ethphy0g {
> -	reg = <7>;
> +&eqos {
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethernet-phy at 5 {
> +			reg = <5>;

The reg should be 'reg = <7>' ;-) It's just the node name which should 
be 'ethernet-phy at 5'. (Yes, I know, it is not consistent, that's because 
the DTO cannot "rename" the node itself easily).


More information about the U-Boot mailing list