[PATCH] mtd: spinand: Add support for XTX XT26xxxDxxxxx
Bruce Suen
bruce_suen at 163.com
Thu Oct 19 05:21:25 CEST 2023
Add Support XTX Technology XT26G01DXXXXX, XT26G11DXXXXX, XT26Q01DXXXXX,
XT26G02DXXXXX, XT26G12DXXXXX, XT26Q02DXXXXX, XT26G04DXXXXX, and
XT26Q04DXXXXX SPI NAND.
These are 3V/1.8V 1G/2G/4Gbit serial SLC NAND flash device with on-die
ECC(8bit strength per 512bytes).
Datasheet Links:
- http://www.xtxtech.com/download/?AId=458
- http://www.xtxtech.com/download/?AId=495
Signed-off-by: Bruce Suen <bruce_suen at 163.com>
---
drivers/mtd/nand/spi/Makefile | 1 +
drivers/mtd/nand/spi/core.c | 1 +
drivers/mtd/nand/spi/xtx.c | 180 ++++++++++++++++++++++++++++++++++
include/linux/mtd/spinand.h | 1 +
4 files changed, 183 insertions(+)
create mode 100644 drivers/mtd/nand/spi/xtx.c
diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
index 3051de4f7e..e46cfed446 100644
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
+spinand-objs += xtx.o
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 597b088ca7..0b4c067425 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -828,6 +828,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
¶gon_spinand_manufacturer,
&toshiba_spinand_manufacturer,
&winbond_spinand_manufacturer,
+ &xtx_spinand_manufacturer,
};
static int spinand_manufacturer_match(struct spinand_device *spinand,
diff --git a/drivers/mtd/nand/spi/xtx.c b/drivers/mtd/nand/spi/xtx.c
new file mode 100644
index 0000000000..ced05b5895
--- /dev/null
+++ b/drivers/mtd/nand/spi/xtx.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Stefan Roese <sr at denx.de>
+ *
+ * Derived from drivers/mtd/nand/spi/micron.c
+ * Copyright (c) 2016-2017 Micron Technology, Inc.
+ */
+
+#ifndef __UBOOT__
+#include <linux/device.h>
+#include <linux/kernel.h>
+#endif
+#include <linux/bitfield.h>
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_XTX 0x0B
+
+#define XT26XXXD_STATUS_ECC3_ECC2_MASK GENMASK(7, 6)
+#define XT26XXXD_STATUS_ECC_NO_DETECTED (0)
+#define XT26XXXD_STATUS_ECC_1_7_CORRECTED (1)
+#define XT26XXXD_STATUS_ECC_8_CORRECTED (3)
+#define XT26XXXD_STATUS_ECC_UNCOR_ERROR (2)
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int xt26xxxd_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section)
+ return -ERANGE;
+
+ region->offset = mtd->oobsize / 2;
+ region->length = mtd->oobsize / 2;
+
+ return 0;
+}
+
+static int xt26xxxd_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section)
+ return -ERANGE;
+
+ region->offset = 2;
+ region->length = mtd->oobsize / 2 - 2;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops xt26xxxd_ooblayout = {
+ .ecc = xt26xxxd_ooblayout_ecc,
+ .rfree = xt26xxxd_ooblayout_free,
+};
+
+static int xt26xxxd_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
+{
+ switch (FIELD_GET(STATUS_ECC_MASK, status)) {
+ case XT26XXXD_STATUS_ECC_NO_DETECTED:
+ return 0;
+ case XT26XXXD_STATUS_ECC_UNCOR_ERROR:
+ return -EBADMSG;
+ case XT26XXXD_STATUS_ECC_1_7_CORRECTED:
+ return 4 + FIELD_GET(XT26XXXD_STATUS_ECC3_ECC2_MASK, status);
+ case XT26XXXD_STATUS_ECC_8_CORRECTED:
+ return 8;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static const struct spinand_info xtx_spinand_table[] = {
+ SPINAND_INFO("XT26G01D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x31),
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26G11D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x34),
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26Q01D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x51),
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26G02D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x32),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26G12D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x35),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26Q02D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x52),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26G04D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x33),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26Q04D",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x53),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26xxxd_ecc_get_status)),
+};
+
+static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {
+};
+
+const struct spinand_manufacturer xtx_spinand_manufacturer = {
+ .id = SPINAND_MFR_XTX,
+ .name = "XTX",
+ .chips = xtx_spinand_table,
+ .nchips = ARRAY_SIZE(xtx_spinand_table),
+ .ops = &xtx_spinand_manuf_ops,
+};
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index e8d6feb970..bf7696a981 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -251,6 +251,7 @@ extern const struct spinand_manufacturer micron_spinand_manufacturer;
extern const struct spinand_manufacturer paragon_spinand_manufacturer;
extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
extern const struct spinand_manufacturer winbond_spinand_manufacturer;
+extern const struct spinand_manufacturer xtx_spinand_manufacturer;
/**
* struct spinand_op_variants - SPI NAND operation variants
--
2.34.1
More information about the U-Boot
mailing list