[PATCH v4 2/4] configs: npcm: Support more uart baud rate
Jim Liu
jim.t90615 at gmail.com
Mon Oct 23 09:02:23 CEST 2023
Add uart baud rate table to arbel(npcm8xx) and poleg(npcm7xx)
Signed-off-by: Jim Liu <JJLIU0 at nuvoton.com>
Changes for v2:
- Add commit message
Changes for v3:
- Modify CONFIG_SYS_BAUDRATE_TABLE
Changes for v4:
- No change
---
include/configs/arbel.h | 5 ++++-
include/configs/poleg.h | 2 ++
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/include/configs/arbel.h b/include/configs/arbel.h
index 891257bc93..29010503d3 100644
--- a/include/configs/arbel.h
+++ b/include/configs/arbel.h
@@ -7,11 +7,14 @@
#define __CONFIG_ARBEL_H
#define CFG_SYS_SDRAM_BASE 0x0
-#define CFG_SYS_BOOTMAPSZ (30 << 20)
+#define CFG_SYS_BOOTMAPSZ (128 << 20)
#define CFG_SYS_BOOTM_LEN (20 << 20)
#define CFG_SYS_INIT_RAM_ADDR CFG_SYS_SDRAM_BASE
#define CFG_SYS_INIT_RAM_SIZE 0x8000
+#define CFG_SYS_BAUDRATE_TABLE { 9600, 14400, 19200, 38400, 57600, 115200, 230400, \ 380400, 460800, 921600 }
+
+
/* Default environemnt variables */
#define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80400000\0" \
"stdin=serial\0" \
diff --git a/include/configs/poleg.h b/include/configs/poleg.h
index 1e96e838be..2a2d85c8ec 100644
--- a/include/configs/poleg.h
+++ b/include/configs/poleg.h
@@ -13,6 +13,8 @@
#define CFG_SYS_BOOTMAPSZ (0x30 << 20)
#define CFG_SYS_SDRAM_BASE 0x0
+#define CFG_SYS_BAUDRATE_TABLE { 57600, 115200, 230400, 460800 }
+
/* Default environemnt variables */
#define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \
"stdin=serial\0" \
--
2.25.1
More information about the U-Boot
mailing list