[PATCH v3 18/24] sunxi: R528: add SMHC2 pin pull ups support

[Andre Przywara]

From: Okhunjon Sobirjonov <okhunjon72 at gmail.com>

Add support for eMMC (SMHC2) pin pull ups for R528 boards.

The D1 and T113s (and even R329) SoCs do not support 8-bit eMMC anymore,
so it's just four data pins to cover here.

Signed-off-by: Okhunjon Sobirjonov <Okhunjon.Sobirjonov at Mec-electronics.com>
Reviewed-by: Andre Przywara <andre.przywara at arm.com>
[Andre: adjust commit message]
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 board/sunxi/board.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 7a1c708b9f2..39ecbe988f7 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -459,6 +459,13 @@ static void mmc_pinmux_setup(int sdc)
 			sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
 			sunxi_gpio_set_drv(pin, 2);
 		}
+#elif defined(CONFIG_MACH_SUN8I_R528)
+                /* SDC2: PC2-PC7 */
+                for (pin = SUNXI_GPC(2); pin <= SUNXI_GPC(7); pin++) {
+                        sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
+                        sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+                        sunxi_gpio_set_drv(pin, 2);
+                }
 #else
 		puts("ERROR: No pinmux setup defined for MMC2!\n");
 #endif
-- 
2.25.1