[PATCH v5 0/4] Conclusive KSTR-SAMA5D27 support

[Eugen Hristev]

On 10/18/23 17:00, Artur Rojek wrote:
> Hi all,
> 
> this is v5 of the Conclusive KSTR-SAMA5D27 support series.
> 
> Patches [1/4], [2/4] and [3/4] remain unchanged.
> 
> In patch [4/4], a new dtsi file has been added in order to keep U-Boot
> specific properties separate from the main dts. As such, MAINTAINERS has
> been modified to feature the new file.
> 
> An alias to the i2c node holding the EEPROM has also been explicitly
> added, so that it always enumerates at bus 2.
> 
> Artur Rojek (4):
>    common: add prototype & rename populate_serial_number()
>    event: add new EVT_SETTINGS_R event
>    arm: dts: at91: sama5: Add flexcom4 node
>    board: Add support for Conclusive KSTR-SAMA5D27
> 
>   arch/arm/dts/Makefile                         |   3 +
>   arch/arm/dts/at91-kstr-sama5d27-u-boot.dtsi   |  42 +++
>   arch/arm/dts/at91-kstr-sama5d27.dts           | 127 ++++++++++
>   arch/arm/dts/sama5d2.dtsi                     |  20 ++
>   arch/arm/mach-at91/Kconfig                    |  12 +
>   board/conclusive/kstr-sama5d27/Kconfig        |  15 ++
>   board/conclusive/kstr-sama5d27/MAINTAINERS    |   9 +
>   board/conclusive/kstr-sama5d27/Makefile       |   5 +
>   .../conclusive/kstr-sama5d27/kstr-sama5d27.c  | 239 ++++++++++++++++++
>   cmd/tlv_eeprom.c                              |  14 +-
>   common/board_r.c                              |   1 +
>   common/event.c                                |   1 +
>   configs/kstr_sama5d27_defconfig               |  73 ++++++
>   include/configs/kstr-sama5d27.h               |  15 ++
>   include/event.h                               |   9 +
>   include/init.h                                |  14 +
>   16 files changed, 586 insertions(+), 13 deletions(-)
>   create mode 100644 arch/arm/dts/at91-kstr-sama5d27-u-boot.dtsi
>   create mode 100644 arch/arm/dts/at91-kstr-sama5d27.dts
>   create mode 100644 board/conclusive/kstr-sama5d27/Kconfig
>   create mode 100644 board/conclusive/kstr-sama5d27/MAINTAINERS
>   create mode 100644 board/conclusive/kstr-sama5d27/Makefile
>   create mode 100644 board/conclusive/kstr-sama5d27/kstr-sama5d27.c
>   create mode 100644 configs/kstr_sama5d27_defconfig
>   create mode 100644 include/configs/kstr-sama5d27.h
> 


Applied series to u-boot-at91 / master, thanks !