[PATCH v5 14/16] cmd: add scmi command for SCMI firmware

[Tom Rini]

On Tue, Oct 24, 2023 at 10:27:44AM +0200, Michal Simek wrote:
> Hi Takahiro,
> 
> út 26. 9. 2023 v 9:00 odesílatel AKASHI Takahiro
> <takahiro.akashi at linaro.org> napsal:
> >
> > This command, "scmi", may provide a command line interface to various SCMI
> > protocols. It supports at least initially SCMI base protocol and is
> > intended mainly for debug purpose.
> >
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > Reviewed-by: Simon Glass <sjg at chromium.org>
> > Reviewed-by: Etienne Carriere <etienne.carriere at foss.st.com>
> > ---
> > v3
> > * describe that arguments are in hex at a help message
> > * modify the code for dynamically allocated agent names
> > v2
> > * remove sub command category, 'scmi base', for simplicity
> > ---
> >  cmd/Kconfig  |   9 ++
> >  cmd/Makefile |   1 +
> >  cmd/scmi.c   | 337 +++++++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 347 insertions(+)
> >  create mode 100644 cmd/scmi.c
> >
> > diff --git a/cmd/Kconfig b/cmd/Kconfig
> > index 43ca10f69ccf..f46152ace7d8 100644
> > --- a/cmd/Kconfig
> > +++ b/cmd/Kconfig
> > @@ -2533,6 +2533,15 @@ config CMD_CROS_EC
> >           a number of sub-commands for performing EC tasks such as
> >           updating its flash, accessing a small saved context area
> >           and talking to the I2C bus behind the EC (if there is one).
> > +
> > +config CMD_SCMI
> > +       bool "Enable scmi command"
> > +       depends on SCMI_FIRMWARE
> > +       default n
> 
> This line above is wrong and this was removed from v6 with
> "drop scmi command which was intended to be used for debugging".
> It is fine that it shouldn't be used on production system but it
> doesn't mean that
> it should be actually removed.
> It is useful for bring ups. Can we get this patch merged? It was
> already reviewed
> anyway.

There was then also some conflict with the follow-up series here. I
would be fine with the command being introduced again after I merge that
second series, which I am testing now.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20231024/ff2bb196/attachment.sig>