[PATCH 1/3] board: developerbox: remove obsolete NOR flash layout definition

[Ilias Apalodimas]

On Wed, 25 Oct 2023 at 09:52, Masahisa Kojima
<masahisa.kojima at linaro.org> wrote:
>
> There are two kinds of NOR flash layout for the Developerbox.
> Capsule update for the old layout is no longer available since
> it has small capacity for secure world images and can not
> house the TA such as fTPM.
> This commit removes the definition related to the obsolete
> NOR flash layout for the UEFI capsule update.
>
> Signed-off-by: Masahisa Kojima <masahisa.kojima at linaro.org>
> Acked-by: Jassi Brar <jaswinder.singh at linaro.org>
> ---
>  include/configs/synquacer.h | 19 -------------------
>  1 file changed, 19 deletions(-)
>
> diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
> index cd7359c2f8..e36e63e81e 100644
> --- a/include/configs/synquacer.h
> +++ b/include/configs/synquacer.h
> @@ -40,20 +40,6 @@
>
>  /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
>
> -#ifdef CONFIG_FWU_MULTI_BANK_UPDATE
> -#define DEFAULT_DFU_ALT_INFO
> -#else
> -#define DEFAULT_DFU_ALT_INFO "dfu_alt_info="                           \
> -                       "mtd nor1=u-boot.bin raw 200000 100000;"        \
> -                       "fip.bin raw 180000 78000;"                     \
> -                       "optee.bin raw 500000 100000\0"
> -#endif

We don't need any of these because we use the .dfu_alt_string to
generate those right?

> -
> -/* GUIDs for capsule updatable firmware images */
> -#define DEVELOPERBOX_UBOOT_IMAGE_GUID \
> -       EFI_GUID(0x53a92e83, 0x4ef4, 0x473a, 0x8b, 0x0d, \
> -                0xb5, 0xd8, 0xc7, 0xb2, 0xd6, 0x00)
> -
>  #ifdef CONFIG_FWU_MULTI_BANK_UPDATE
>  #define DEVELOPERBOX_FIP_IMAGE_GUID \
>         EFI_GUID(0x7d6dc310, 0x52ca, 0x43b8, 0xb7, 0xb9, \
> @@ -64,10 +50,6 @@
>                  0x33, 0xe0, 0xb9, 0x16, 0xf3, 0x98)
>  #endif
>
> -#define DEVELOPERBOX_OPTEE_IMAGE_GUID \
> -       EFI_GUID(0xc1b629f1, 0xce0e, 0x4894, 0x82, 0xbf, \
> -                0xf0, 0xa3, 0x83, 0x87, 0xe6, 0x30)
> -
>  /* Distro boot settings */
>  #ifdef CONFIG_CMD_USB
>  #define BOOT_TARGET_DEVICE_USB(func)   func(USB, usb, 0)
> @@ -107,7 +89,6 @@
>         "ramdisk_addr_r=0xa0000000\0"           \
>         "scriptaddr=0x88000000\0"               \
>         "pxefile_addr_r=0x88100000\0"           \
> -       DEFAULT_DFU_ALT_INFO                    \
>         BOOTENV
>
>  #endif /* __CONFIG_H */
> --
> 2.34.1
>
Thanks
/Ilias