[PATCH v2 3/7] clk/qcom: handle resets and clocks in one device

Caleb Connolly caleb.connolly at linaro.org
Mon Oct 30 23:23:25 CET 2023


From: Konrad Dybcio <konrad.dybcio at linaro.org>

Qualcomm's clock controller blocks actually do much more than it
says on the tin.. They provide clocks, resets and power domains.
Currently, U-Boot requires one to spawn 2 separate devices for
controlling clocks and resets, both spanning the same register space.
Refactor the code to make it work with just a single DT node, making
it compatible with upstream Linux bindings and dropping the dedicated
reset driver in favour of including it in the clock driver.

Heavily inspired by Renesas code for a similar hw block.

Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
[caleb: moved drivers to clk/qcom, added reset driver and adjusted bind
logic. Imported qcom,gcc-ipq4019.h from Linux]
Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 arch/arm/Kconfig                                   |   1 +
 arch/arm/dts/qcom-ipq4019.dtsi                     |  14 +-
 arch/arm/dts/qcs404-evb.dts                        |  19 +-
 drivers/clk/qcom/clock-apq8016.c                   |  17 ++
 drivers/clk/qcom/clock-apq8096.c                   |  16 ++
 drivers/clk/qcom/clock-ipq4019.c                   |  96 +++++++++-
 drivers/clk/qcom/clock-qcom.c                      | 119 +++++++++++--
 drivers/clk/qcom/clock-qcom.h                      |  22 ++-
 drivers/clk/qcom/clock-qcs404.c                    |  50 +++++-
 drivers/clk/qcom/clock-sdm845.c                    |  42 +++++
 drivers/reset/Kconfig                              |   7 -
 drivers/reset/Makefile                             |   1 -
 drivers/reset/reset-qcom.c                         | 195 ---------------------
 .../{qcom,ipq4019-gcc.h => qcom,gcc-ipq4019.h}     |  73 ++++++++
 include/dt-bindings/reset/qcom,ipq4019-reset.h     |  92 ----------
 15 files changed, 422 insertions(+), 342 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5aaf7e5e32af..faccfaf720a8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1067,6 +1067,7 @@ config ARCH_SNAPDRAGON
 	select DM
 	select DM_GPIO
 	select DM_SERIAL
+	select DM_RESET
 	select GPIO_EXTRA_HEADER
 	select MSM_SMEM
 	select OF_CONTROL
diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi
index 0850ae56e9a8..f9489e42ea2c 100644
--- a/arch/arm/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/dts/qcom-ipq4019.dtsi
@@ -66,14 +66,6 @@
 			status = "disabled";
 		};
 
-		reset: gcc-reset at 1800000 {
-			compatible = "qcom,gcc-reset-ipq4019";
-			reg = <0x1800000 0x60000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			bootph-all;
-		};
-
 		soc_gpios: pinctrl at 1000000 {
 			compatible = "qcom,ipq4019-pinctrl";
 			reg = <0x1000000 0x300000>;
@@ -136,7 +128,7 @@
 			#phy-cells = <0>;
 			reg = <0x9a000 0x800>;
 			reg-names = "phy_base";
-			resets = <&reset USB3_UNIPHY_PHY_ARES>;
+			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
 			reset-names = "por_rst";
 			status = "disabled";
 		};
@@ -146,7 +138,7 @@
 			#phy-cells = <0>;
 			reg = <0xa6000 0x40>;
 			reg-names = "phy_base";
-			resets = <&reset USB3_HSPHY_POR_ARES>, <&reset USB3_HSPHY_S_ARES>;
+			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
 			reset-names = "por_rst", "srif_rst";
 			status = "disabled";
 		};
@@ -179,7 +171,7 @@
 			#phy-cells = <0>;
 			reg = <0xa8000 0x40>;
 			reg-names = "phy_base";
-			resets = <&reset USB2_HSPHY_POR_ARES>, <&reset USB2_HSPHY_S_ARES>;
+			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
 			reset-names = "por_rst", "srif_rst";
 			status = "disabled";
 		};
diff --git a/arch/arm/dts/qcs404-evb.dts b/arch/arm/dts/qcs404-evb.dts
index 8d7893c11695..84224a8a3d39 100644
--- a/arch/arm/dts/qcs404-evb.dts
+++ b/arch/arm/dts/qcs404-evb.dts
@@ -208,11 +208,6 @@
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			#clock-cells = <1>;
-		};
-
-		reset: gcc-reset at 1800000 {
-			compatible = "qcom,gcc-reset-qcs404";
-			reg = <0x1800000 0x80000>;
 			#reset-cells = <1>;
 		};
 
@@ -245,8 +240,8 @@
 			clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
 				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
 			clock-names = "ahb", "pipe";
-			resets = <&reset GCC_USB3_PHY_BCR>,
-				 <&reset GCC_USB3PHY_PHY_BCR>;
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
 			reset-names = "com", "phy";
 		};
 
@@ -257,8 +252,8 @@
 			clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
 				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 			clock-names = "ahb", "sleep";
-			resets = <&reset GCC_USB_HS_PHY_CFG_AHB_BCR>,
-				 <&reset GCC_USB2A_PHY_BCR>;
+			resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
+				 <&gcc GCC_USB2A_PHY_BCR>;
 			reset-names = "phy", "por";
 		};
 
@@ -269,8 +264,8 @@
 			clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
 				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 			clock-names = "ahb", "sleep";
-			resets = <&reset GCC_QUSB2_PHY_BCR>,
-				 <&reset GCC_USB2_HS_PHY_ONLY_BCR>;
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
 			reset-names = "phy", "por";
 		};
 
@@ -335,7 +330,7 @@
 				 <&gcc GCC_ETH_PTP_CLK>,
 				 <&gcc GCC_ETH_RGMII_CLK>;
 
-			resets = <&reset GCC_EMAC_BCR>;
+			resets = <&gcc GCC_EMAC_BCR>;
 			reset-names = "emac";
 
 			snps,tso;
diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c
index 90f2a93d9ed5..3bddbd275906 100644
--- a/drivers/clk/qcom/clock-apq8016.c
+++ b/drivers/clk/qcom/clock-apq8016.c
@@ -13,6 +13,7 @@
 #include <errno.h>
 #include <asm/io.h>
 #include <linux/bitops.h>
+
 #include "clock-qcom.h"
 
 /* GPLL0 clock control registers */
@@ -116,3 +117,19 @@ int msm_enable(struct clk *clk)
 {
 	return 0;
 }
+
+static const struct udevice_id gcc_apq8016_of_match[] = {
+	{
+		.compatible = "qcom,gcc-apq8016",
+		/* TODO: add reset map */
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_apq8016) = {
+	.name		= "gcc_apq8016",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_apq8016_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c
index d5388c69aefe..64b8cdf4c54b 100644
--- a/drivers/clk/qcom/clock-apq8096.c
+++ b/drivers/clk/qcom/clock-apq8096.c
@@ -99,3 +99,19 @@ int msm_enable(struct clk *clk)
 {
 	return 0;
 }
+
+static const struct udevice_id gcc_apq8096_of_match[] = {
+	{
+		.compatible = "qcom,gcc-apq8096",
+		/* TODO: add reset map */
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_apq8096) = {
+	.name		= "gcc_apq8096",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_apq8096_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/qcom/clock-ipq4019.c b/drivers/clk/qcom/clock-ipq4019.c
index 04c99964df15..db869f874219 100644
--- a/drivers/clk/qcom/clock-ipq4019.c
+++ b/drivers/clk/qcom/clock-ipq4019.c
@@ -12,7 +12,7 @@
 #include <common.h>
 #include <dm.h>
 #include <errno.h>
-#include <dt-bindings/clock/qcom,ipq4019-gcc.h>
+#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
 
 #include "clock-qcom.h"
 
@@ -49,3 +49,97 @@ int msm_enable(struct clk *clk)
 	}
 }
 
+static const struct qcom_reset_map gcc_ipq4019_resets[] = {
+	[WIFI0_CPU_INIT_RESET] = { 0x1f008, 5 },
+	[WIFI0_RADIO_SRIF_RESET] = { 0x1f008, 4 },
+	[WIFI0_RADIO_WARM_RESET] = { 0x1f008, 3 },
+	[WIFI0_RADIO_COLD_RESET] = { 0x1f008, 2 },
+	[WIFI0_CORE_WARM_RESET] = { 0x1f008, 1 },
+	[WIFI0_CORE_COLD_RESET] = { 0x1f008, 0 },
+	[WIFI1_CPU_INIT_RESET] = { 0x20008, 5 },
+	[WIFI1_RADIO_SRIF_RESET] = { 0x20008, 4 },
+	[WIFI1_RADIO_WARM_RESET] = { 0x20008, 3 },
+	[WIFI1_RADIO_COLD_RESET] = { 0x20008, 2 },
+	[WIFI1_CORE_WARM_RESET] = { 0x20008, 1 },
+	[WIFI1_CORE_COLD_RESET] = { 0x20008, 0 },
+	[USB3_UNIPHY_PHY_ARES] = { 0x1e038, 5 },
+	[USB3_HSPHY_POR_ARES] = { 0x1e038, 4 },
+	[USB3_HSPHY_S_ARES] = { 0x1e038, 2 },
+	[USB2_HSPHY_POR_ARES] = { 0x1e01c, 4 },
+	[USB2_HSPHY_S_ARES] = { 0x1e01c, 2 },
+	[PCIE_PHY_AHB_ARES] = { 0x1d010, 11 },
+	[PCIE_AHB_ARES] = { 0x1d010, 10 },
+	[PCIE_PWR_ARES] = { 0x1d010, 9 },
+	[PCIE_PIPE_STICKY_ARES] = { 0x1d010, 8 },
+	[PCIE_AXI_M_STICKY_ARES] = { 0x1d010, 7 },
+	[PCIE_PHY_ARES] = { 0x1d010, 6 },
+	[PCIE_PARF_XPU_ARES] = { 0x1d010, 5 },
+	[PCIE_AXI_S_XPU_ARES] = { 0x1d010, 4 },
+	[PCIE_AXI_M_VMIDMT_ARES] = { 0x1d010, 3 },
+	[PCIE_PIPE_ARES] = { 0x1d010, 2 },
+	[PCIE_AXI_S_ARES] = { 0x1d010, 1 },
+	[PCIE_AXI_M_ARES] = { 0x1d010, 0 },
+	[ESS_RESET] = { 0x12008, 0},
+	[GCC_BLSP1_BCR] = {0x01000, 0},
+	[GCC_BLSP1_QUP1_BCR] = {0x02000, 0},
+	[GCC_BLSP1_UART1_BCR] = {0x02038, 0},
+	[GCC_BLSP1_QUP2_BCR] = {0x03008, 0},
+	[GCC_BLSP1_UART2_BCR] = {0x03028, 0},
+	[GCC_BIMC_BCR] = {0x04000, 0},
+	[GCC_TLMM_BCR] = {0x05000, 0},
+	[GCC_IMEM_BCR] = {0x0E000, 0},
+	[GCC_ESS_BCR] = {0x12008, 0},
+	[GCC_PRNG_BCR] = {0x13000, 0},
+	[GCC_BOOT_ROM_BCR] = {0x13008, 0},
+	[GCC_CRYPTO_BCR] = {0x16000, 0},
+	[GCC_SDCC1_BCR] = {0x18000, 0},
+	[GCC_SEC_CTRL_BCR] = {0x1A000, 0},
+	[GCC_AUDIO_BCR] = {0x1B008, 0},
+	[GCC_QPIC_BCR] = {0x1C000, 0},
+	[GCC_PCIE_BCR] = {0x1D000, 0},
+	[GCC_USB2_BCR] = {0x1E008, 0},
+	[GCC_USB2_PHY_BCR] = {0x1E018, 0},
+	[GCC_USB3_BCR] = {0x1E024, 0},
+	[GCC_USB3_PHY_BCR] = {0x1E034, 0},
+	[GCC_SYSTEM_NOC_BCR] = {0x21000, 0},
+	[GCC_PCNOC_BCR] = {0x2102C, 0},
+	[GCC_DCD_BCR] = {0x21038, 0},
+	[GCC_SNOC_BUS_TIMEOUT0_BCR] = {0x21064, 0},
+	[GCC_SNOC_BUS_TIMEOUT1_BCR] = {0x2106C, 0},
+	[GCC_SNOC_BUS_TIMEOUT2_BCR] = {0x21074, 0},
+	[GCC_SNOC_BUS_TIMEOUT3_BCR] = {0x2107C, 0},
+	[GCC_PCNOC_BUS_TIMEOUT0_BCR] = {0x21084, 0},
+	[GCC_PCNOC_BUS_TIMEOUT1_BCR] = {0x2108C, 0},
+	[GCC_PCNOC_BUS_TIMEOUT2_BCR] = {0x21094, 0},
+	[GCC_PCNOC_BUS_TIMEOUT3_BCR] = {0x2109C, 0},
+	[GCC_PCNOC_BUS_TIMEOUT4_BCR] = {0x210A4, 0},
+	[GCC_PCNOC_BUS_TIMEOUT5_BCR] = {0x210AC, 0},
+	[GCC_PCNOC_BUS_TIMEOUT6_BCR] = {0x210B4, 0},
+	[GCC_PCNOC_BUS_TIMEOUT7_BCR] = {0x210BC, 0},
+	[GCC_PCNOC_BUS_TIMEOUT8_BCR] = {0x210C4, 0},
+	[GCC_PCNOC_BUS_TIMEOUT9_BCR] = {0x210CC, 0},
+	[GCC_TCSR_BCR] = {0x22000, 0},
+	[GCC_MPM_BCR] = {0x24000, 0},
+	[GCC_SPDM_BCR] = {0x25000, 0},
+};
+
+static struct msm_clk_data ipq4019_data = {
+	.resets = gcc_ipq4019_resets,
+	.num_resets = ARRAY_SIZE(gcc_ipq4019_resets),
+};
+
+static const struct udevice_id gcc_ipq4019_of_match[] = {
+	{
+		.compatible = "qcom,gcc-ipq4019",
+		.data = (ulong)&ipq4019_data,
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_ipq4019) = {
+	.name		= "gcc_ipq4019",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_ipq4019_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c
index 5914616fba5d..a661837e4e11 100644
--- a/drivers/clk/qcom/clock-qcom.c
+++ b/drivers/clk/qcom/clock-qcom.c
@@ -1,8 +1,13 @@
-// SPDX-License-Identifier: BSD-3-Clause
+// SPDX-License-Identifier: BSD-3-Clause AND GPL-2.0
 /*
- * Clock drivers for Qualcomm APQ8016, APQ8096
+ * Clock and reset drivers for Qualcomm platforms Global Clock
+ * Controller (GCC).
  *
  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
+ * (C) Copyright 2020 Sartura Ltd. (reset driver)
+ *     Author: Robert Marko <robert.marko at sartura.hr>
+ * (C) Copyright 2022 Linaro Ltd. (reset driver)
+ *     Author: Sumit Garg <sumit.garg at linaro.org>
  *
  * Based on Little Kernel driver, simplified
  */
@@ -10,9 +15,13 @@
 #include <common.h>
 #include <clk-uclass.h>
 #include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
 #include <errno.h>
 #include <asm/io.h>
 #include <linux/bitops.h>
+#include <reset-uclass.h>
+
 #include "clock-qcom.h"
 
 /* CBCR register fields */
@@ -137,12 +146,15 @@ void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
 
 static int msm_clk_probe(struct udevice *dev)
 {
+	struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(dev);
 	struct msm_clk_priv *priv = dev_get_priv(dev);
 
 	priv->base = dev_read_addr(dev);
 	if (priv->base == FDT_ADDR_T_NONE)
 		return -EINVAL;
 
+	priv->data = data;
+
 	return 0;
 }
 
@@ -161,22 +173,97 @@ static struct clk_ops msm_clk_ops = {
 	.enable = msm_clk_enable,
 };
 
-static const struct udevice_id msm_clk_ids[] = {
-	{ .compatible = "qcom,gcc-msm8916" },
-	{ .compatible = "qcom,gcc-apq8016" },
-	{ .compatible = "qcom,gcc-msm8996" },
-	{ .compatible = "qcom,gcc-apq8096" },
-	{ .compatible = "qcom,gcc-ipq4019" },
-	{ .compatible = "qcom,gcc-sdm845" },
-	{ .compatible = "qcom,gcc-qcs404" },
-	{ }
-};
-
-U_BOOT_DRIVER(clk_msm) = {
-	.name		= "clk_msm",
+U_BOOT_DRIVER(qcom_clk) = {
+	.name		= "qcom_clk",
 	.id		= UCLASS_CLK,
-	.of_match	= msm_clk_ids,
 	.ops		= &msm_clk_ops,
 	.priv_auto	= sizeof(struct msm_clk_priv),
 	.probe		= msm_clk_probe,
 };
+
+int qcom_cc_bind(struct udevice *parent)
+{
+	struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(parent);
+	struct udevice *clkdev, *rstdev;
+	struct driver *drv;
+	int ret;
+
+	/* Get a handle to the common clk handler */
+	drv = lists_driver_lookup_name("qcom_clk");
+	if (!drv)
+		return -ENOENT;
+
+	/* Register the clock controller */
+	ret = device_bind_with_driver_data(parent, drv, "qcom_clk", (ulong)data,
+					   dev_ofnode(parent), &clkdev);
+	if (ret)
+		return ret;
+
+	/* Bail out early if resets are not specified for this platform */
+	if (!data->resets)
+		return ret;
+
+	/* Get a handle to the common reset handler */
+	drv = lists_driver_lookup_name("qcom_reset");
+	if (!drv)
+		return -ENOENT;
+
+	/* Register the reset controller */
+	ret = device_bind_with_driver_data(parent, drv, "qcom_reset", (ulong)data,
+					   dev_ofnode(parent), &rstdev);
+	if (ret)
+		device_unbind(clkdev);
+
+	return ret;
+}
+
+static int qcom_reset_set(struct reset_ctl *rst, bool assert)
+{
+	struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(rst->dev);
+	void __iomem *base = dev_get_priv(rst->dev);
+	const struct qcom_reset_map *map;
+	u32 value;
+
+	map = &data->resets[rst->id];
+
+	value = readl(base + map->reg);
+
+	if (assert)
+		value |= BIT(map->bit);
+	else
+		value &= ~BIT(map->bit);
+
+	writel(value, base + map->reg);
+
+	return 0;
+}
+
+static int qcom_reset_assert(struct reset_ctl *rst)
+{
+	return qcom_reset_set(rst, true);
+}
+
+static int qcom_reset_deassert(struct reset_ctl *rst)
+{
+	return qcom_reset_set(rst, false);
+}
+
+static const struct reset_ops qcom_reset_ops = {
+	.rst_assert = qcom_reset_assert,
+	.rst_deassert = qcom_reset_deassert,
+};
+
+static int qcom_reset_probe(struct udevice *dev)
+{
+	/* Set our priv pointer to the base address */
+	dev_set_priv(dev, (void *)dev_read_addr(dev));
+
+	return 0;
+}
+
+U_BOOT_DRIVER(qcom_reset) = {
+	.name = "qcom_reset",
+	.id = UCLASS_RESET,
+	.ops = &qcom_reset_ops,
+	.probe = qcom_reset_probe,
+};
diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h
index c90bbefa5881..a9f895c2422e 100644
--- a/drivers/clk/qcom/clock-qcom.h
+++ b/drivers/clk/qcom/clock-qcom.h
@@ -1,11 +1,9 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Qualcomm APQ8016, APQ8096, SDM845
- *
  * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at linaro.org>
  */
-#ifndef _CLOCK_SNAPDRAGON_H
-#define _CLOCK_SNAPDRAGON_H
+#ifndef _CLOCK_QCOM_H
+#define _CLOCK_QCOM_H
 
 #define CFG_CLK_SRC_CXO   (0 << 8)
 #define CFG_CLK_SRC_GPLL0 (1 << 8)
@@ -32,10 +30,22 @@ struct bcr_regs {
 	uintptr_t D;
 };
 
-struct msm_clk_priv {
-	phys_addr_t base;
+struct qcom_reset_map {
+	unsigned int reg;
+	u8 bit;
 };
 
+struct msm_clk_data {
+	const struct qcom_reset_map	*resets;
+	unsigned long			num_resets;
+};
+
+struct msm_clk_priv {
+	phys_addr_t		base;
+	struct msm_clk_data	*data;
+};
+
+int qcom_cc_bind(struct udevice *parent);
 void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0);
 void clk_bcr_update(phys_addr_t apps_cmd_rgcr);
 void clk_enable_cbc(phys_addr_t cbcr);
diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c
index 80218af73ef6..10ac3609be42 100644
--- a/drivers/clk/qcom/clock-qcs404.c
+++ b/drivers/clk/qcom/clock-qcs404.c
@@ -11,9 +11,10 @@
 #include <errno.h>
 #include <asm/io.h>
 #include <linux/bitops.h>
+#include <dt-bindings/clock/qcom,gcc-qcs404.h>
+
 #include "clock-qcom.h"
 
-#include <dt-bindings/clock/qcom,gcc-qcs404.h>
 
 /* GPLL0 clock control registers */
 #define GPLL0_STATUS_ACTIVE BIT(31)
@@ -235,3 +236,50 @@ int msm_enable(struct clk *clk)
 
 	return 0;
 }
+
+static const struct qcom_reset_map qcs404_gcc_resets[] = {
+	[GCC_GENI_IR_BCR] = { 0x0F000 },
+	[GCC_CDSP_RESTART] = { 0x18000 },
+	[GCC_USB_HS_BCR] = { 0x41000 },
+	[GCC_USB2_HS_PHY_ONLY_BCR] = { 0x41034 },
+	[GCC_QUSB2_PHY_BCR] = { 0x4103c },
+	[GCC_USB_HS_PHY_CFG_AHB_BCR] = { 0x0000c, 1 },
+	[GCC_USB2A_PHY_BCR] = { 0x0000c, 0 },
+	[GCC_USB3_PHY_BCR] = { 0x39004 },
+	[GCC_USB_30_BCR] = { 0x39000 },
+	[GCC_USB3PHY_PHY_BCR] = { 0x39008 },
+	[GCC_PCIE_0_BCR] = { 0x3e000 },
+	[GCC_PCIE_0_PHY_BCR] = { 0x3e004 },
+	[GCC_PCIE_0_LINK_DOWN_BCR] = { 0x3e038 },
+	[GCC_PCIEPHY_0_PHY_BCR] = { 0x3e03c },
+	[GCC_PCIE_0_AXI_MASTER_STICKY_ARES] = { 0x3e040, 6},
+	[GCC_PCIE_0_AHB_ARES] = { 0x3e040, 5 },
+	[GCC_PCIE_0_AXI_SLAVE_ARES] = { 0x3e040, 4 },
+	[GCC_PCIE_0_AXI_MASTER_ARES] = { 0x3e040, 3 },
+	[GCC_PCIE_0_CORE_STICKY_ARES] = { 0x3e040, 2 },
+	[GCC_PCIE_0_SLEEP_ARES] = { 0x3e040, 1 },
+	[GCC_PCIE_0_PIPE_ARES] = { 0x3e040, 0 },
+	[GCC_EMAC_BCR] = { 0x4e000 },
+	[GCC_WDSP_RESTART] = {0x19000},
+};
+
+static const struct msm_clk_data qcs404_gcc_data = {
+	.resets = qcs404_gcc_resets,
+	.num_resets = ARRAY_SIZE(qcs404_gcc_resets),
+};
+
+static const struct udevice_id gcc_qcs404_of_match[] = {
+	{
+		.compatible = "qcom,gcc-qcs404",
+		.data = (ulong)&qcs404_gcc_data
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_qcs404) = {
+	.name		= "gcc_qcs404",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_qcs404_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c
index 95a057b82986..a7a43f69b9b3 100644
--- a/drivers/clk/qcom/clock-sdm845.c
+++ b/drivers/clk/qcom/clock-sdm845.c
@@ -15,6 +15,7 @@
 #include <asm/io.h>
 #include <linux/bitops.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+
 #include "clock-qcom.h"
 
 #define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
@@ -96,3 +97,44 @@ int msm_enable(struct clk *clk)
 {
 	return 0;
 }
+
+static const struct qcom_reset_map sdm845_gcc_resets[] = {
+	[GCC_QUPV3_WRAPPER_0_BCR] = { 0x17000 },
+	[GCC_QUPV3_WRAPPER_1_BCR] = { 0x18000 },
+	[GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 },
+	[GCC_QUSB2PHY_SEC_BCR] = { 0x12004 },
+	[GCC_SDCC2_BCR] = { 0x14000 },
+	[GCC_SDCC4_BCR] = { 0x16000 },
+	[GCC_UFS_CARD_BCR] = { 0x75000 },
+	[GCC_UFS_PHY_BCR] = { 0x77000 },
+	[GCC_USB30_PRIM_BCR] = { 0xf000 },
+	[GCC_USB30_SEC_BCR] = { 0x10000 },
+	[GCC_USB3_PHY_PRIM_BCR] = { 0x50000 },
+	[GCC_USB3PHY_PHY_PRIM_BCR] = { 0x50004 },
+	[GCC_USB3_DP_PHY_PRIM_BCR] = { 0x50008 },
+	[GCC_USB3_PHY_SEC_BCR] = { 0x5000c },
+	[GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 },
+	[GCC_USB3_DP_PHY_SEC_BCR] = { 0x50014 },
+	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
+};
+
+static const struct msm_clk_data qcs404_gcc_data = {
+	.resets = sdm845_gcc_resets,
+	.num_resets = ARRAY_SIZE(sdm845_gcc_resets),
+};
+
+static const struct udevice_id gcc_sdm845_of_match[] = {
+	{
+		.compatible = "qcom,gcc-sdm845",
+		.data = (ulong)&qcs404_gcc_data,
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_sdm845) = {
+	.name		= "gcc_sdm845",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_sdm845_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 73bbd3069258..88e04d93f2a0 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -156,13 +156,6 @@ config RESET_IMX7
 	help
 	  Support for reset controller on i.MX7/8 SoCs.
 
-config RESET_QCOM
-	bool "Reset driver for Qualcomm SoCs"
-	depends on DM_RESET && (ARCH_SNAPDRAGON || ARCH_IPQ40XX)
-	default y
-	help
-	  Support for reset controller on Qualcomm SoCs.
-
 config RESET_SIFIVE
 	bool "Reset Driver for SiFive SoC's"
 	depends on DM_RESET && CLK_SIFIVE_PRCI && (TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED)
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index e2239a250a3a..7b0066f80188 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_RESET_MTMIPS) += reset-mtmips.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_RESET_HISILICON) += reset-hisilicon.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
-obj-$(CONFIG_RESET_QCOM) += reset-qcom.o
 obj-$(CONFIG_RESET_SIFIVE) += reset-sifive.o
 obj-$(CONFIG_RESET_SYSCON) += reset-syscon.o
 obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
diff --git a/drivers/reset/reset-qcom.c b/drivers/reset/reset-qcom.c
deleted file mode 100644
index 94315e76d545..000000000000
--- a/drivers/reset/reset-qcom.c
+++ /dev/null
@@ -1,195 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2020 Sartura Ltd.
- * Copyright (c) 2022 Linaro Ltd.
- *
- * Author: Robert Marko <robert.marko at sartura.hr>
- *         Sumit Garg <sumit.garg at linaro.org>
- *
- * Based on Linux driver
- */
-
-#include <asm/io.h>
-#include <common.h>
-#include <dm.h>
-#include <reset-uclass.h>
-#include <linux/bitops.h>
-#include <malloc.h>
-
-struct qcom_reset_priv {
-	phys_addr_t base;
-};
-
-struct qcom_reset_map {
-	unsigned int reg;
-	u8 bit;
-};
-
-#ifdef CONFIG_ARCH_IPQ40XX
-#include <dt-bindings/reset/qcom,ipq4019-reset.h>
-static const struct qcom_reset_map gcc_qcom_resets[] = {
-	[WIFI0_CPU_INIT_RESET] = { 0x1f008, 5 },
-	[WIFI0_RADIO_SRIF_RESET] = { 0x1f008, 4 },
-	[WIFI0_RADIO_WARM_RESET] = { 0x1f008, 3 },
-	[WIFI0_RADIO_COLD_RESET] = { 0x1f008, 2 },
-	[WIFI0_CORE_WARM_RESET] = { 0x1f008, 1 },
-	[WIFI0_CORE_COLD_RESET] = { 0x1f008, 0 },
-	[WIFI1_CPU_INIT_RESET] = { 0x20008, 5 },
-	[WIFI1_RADIO_SRIF_RESET] = { 0x20008, 4 },
-	[WIFI1_RADIO_WARM_RESET] = { 0x20008, 3 },
-	[WIFI1_RADIO_COLD_RESET] = { 0x20008, 2 },
-	[WIFI1_CORE_WARM_RESET] = { 0x20008, 1 },
-	[WIFI1_CORE_COLD_RESET] = { 0x20008, 0 },
-	[USB3_UNIPHY_PHY_ARES] = { 0x1e038, 5 },
-	[USB3_HSPHY_POR_ARES] = { 0x1e038, 4 },
-	[USB3_HSPHY_S_ARES] = { 0x1e038, 2 },
-	[USB2_HSPHY_POR_ARES] = { 0x1e01c, 4 },
-	[USB2_HSPHY_S_ARES] = { 0x1e01c, 2 },
-	[PCIE_PHY_AHB_ARES] = { 0x1d010, 11 },
-	[PCIE_AHB_ARES] = { 0x1d010, 10 },
-	[PCIE_PWR_ARES] = { 0x1d010, 9 },
-	[PCIE_PIPE_STICKY_ARES] = { 0x1d010, 8 },
-	[PCIE_AXI_M_STICKY_ARES] = { 0x1d010, 7 },
-	[PCIE_PHY_ARES] = { 0x1d010, 6 },
-	[PCIE_PARF_XPU_ARES] = { 0x1d010, 5 },
-	[PCIE_AXI_S_XPU_ARES] = { 0x1d010, 4 },
-	[PCIE_AXI_M_VMIDMT_ARES] = { 0x1d010, 3 },
-	[PCIE_PIPE_ARES] = { 0x1d010, 2 },
-	[PCIE_AXI_S_ARES] = { 0x1d010, 1 },
-	[PCIE_AXI_M_ARES] = { 0x1d010, 0 },
-	[ESS_RESET] = { 0x12008, 0},
-	[GCC_BLSP1_BCR] = {0x01000, 0},
-	[GCC_BLSP1_QUP1_BCR] = {0x02000, 0},
-	[GCC_BLSP1_UART1_BCR] = {0x02038, 0},
-	[GCC_BLSP1_QUP2_BCR] = {0x03008, 0},
-	[GCC_BLSP1_UART2_BCR] = {0x03028, 0},
-	[GCC_BIMC_BCR] = {0x04000, 0},
-	[GCC_TLMM_BCR] = {0x05000, 0},
-	[GCC_IMEM_BCR] = {0x0E000, 0},
-	[GCC_ESS_BCR] = {0x12008, 0},
-	[GCC_PRNG_BCR] = {0x13000, 0},
-	[GCC_BOOT_ROM_BCR] = {0x13008, 0},
-	[GCC_CRYPTO_BCR] = {0x16000, 0},
-	[GCC_SDCC1_BCR] = {0x18000, 0},
-	[GCC_SEC_CTRL_BCR] = {0x1A000, 0},
-	[GCC_AUDIO_BCR] = {0x1B008, 0},
-	[GCC_QPIC_BCR] = {0x1C000, 0},
-	[GCC_PCIE_BCR] = {0x1D000, 0},
-	[GCC_USB2_BCR] = {0x1E008, 0},
-	[GCC_USB2_PHY_BCR] = {0x1E018, 0},
-	[GCC_USB3_BCR] = {0x1E024, 0},
-	[GCC_USB3_PHY_BCR] = {0x1E034, 0},
-	[GCC_SYSTEM_NOC_BCR] = {0x21000, 0},
-	[GCC_PCNOC_BCR] = {0x2102C, 0},
-	[GCC_DCD_BCR] = {0x21038, 0},
-	[GCC_SNOC_BUS_TIMEOUT0_BCR] = {0x21064, 0},
-	[GCC_SNOC_BUS_TIMEOUT1_BCR] = {0x2106C, 0},
-	[GCC_SNOC_BUS_TIMEOUT2_BCR] = {0x21074, 0},
-	[GCC_SNOC_BUS_TIMEOUT3_BCR] = {0x2107C, 0},
-	[GCC_PCNOC_BUS_TIMEOUT0_BCR] = {0x21084, 0},
-	[GCC_PCNOC_BUS_TIMEOUT1_BCR] = {0x2108C, 0},
-	[GCC_PCNOC_BUS_TIMEOUT2_BCR] = {0x21094, 0},
-	[GCC_PCNOC_BUS_TIMEOUT3_BCR] = {0x2109C, 0},
-	[GCC_PCNOC_BUS_TIMEOUT4_BCR] = {0x210A4, 0},
-	[GCC_PCNOC_BUS_TIMEOUT5_BCR] = {0x210AC, 0},
-	[GCC_PCNOC_BUS_TIMEOUT6_BCR] = {0x210B4, 0},
-	[GCC_PCNOC_BUS_TIMEOUT7_BCR] = {0x210BC, 0},
-	[GCC_PCNOC_BUS_TIMEOUT8_BCR] = {0x210C4, 0},
-	[GCC_PCNOC_BUS_TIMEOUT9_BCR] = {0x210CC, 0},
-	[GCC_TCSR_BCR] = {0x22000, 0},
-	[GCC_MPM_BCR] = {0x24000, 0},
-	[GCC_SPDM_BCR] = {0x25000, 0},
-};
-#endif
-
-#ifdef CONFIG_TARGET_QCS404EVB
-#include <dt-bindings/clock/qcom,gcc-qcs404.h>
-static const struct qcom_reset_map gcc_qcom_resets[] = {
-	[GCC_GENI_IR_BCR] = { 0x0F000 },
-	[GCC_CDSP_RESTART] = { 0x18000 },
-	[GCC_USB_HS_BCR] = { 0x41000 },
-	[GCC_USB2_HS_PHY_ONLY_BCR] = { 0x41034 },
-	[GCC_QUSB2_PHY_BCR] = { 0x4103c },
-	[GCC_USB_HS_PHY_CFG_AHB_BCR] = { 0x0000c, 1 },
-	[GCC_USB2A_PHY_BCR] = { 0x0000c, 0 },
-	[GCC_USB3_PHY_BCR] = { 0x39004 },
-	[GCC_USB_30_BCR] = { 0x39000 },
-	[GCC_USB3PHY_PHY_BCR] = { 0x39008 },
-	[GCC_PCIE_0_BCR] = { 0x3e000 },
-	[GCC_PCIE_0_PHY_BCR] = { 0x3e004 },
-	[GCC_PCIE_0_LINK_DOWN_BCR] = { 0x3e038 },
-	[GCC_PCIEPHY_0_PHY_BCR] = { 0x3e03c },
-	[GCC_PCIE_0_AXI_MASTER_STICKY_ARES] = { 0x3e040, 6},
-	[GCC_PCIE_0_AHB_ARES] = { 0x3e040, 5 },
-	[GCC_PCIE_0_AXI_SLAVE_ARES] = { 0x3e040, 4 },
-	[GCC_PCIE_0_AXI_MASTER_ARES] = { 0x3e040, 3 },
-	[GCC_PCIE_0_CORE_STICKY_ARES] = { 0x3e040, 2 },
-	[GCC_PCIE_0_SLEEP_ARES] = { 0x3e040, 1 },
-	[GCC_PCIE_0_PIPE_ARES] = { 0x3e040, 0 },
-	[GCC_EMAC_BCR] = { 0x4e000 },
-	[GCC_WDSP_RESTART] = {0x19000},
-};
-#endif
-
-static int qcom_reset_assert(struct reset_ctl *rst)
-{
-	struct qcom_reset_priv *priv = dev_get_priv(rst->dev);
-	const struct qcom_reset_map *reset_map = gcc_qcom_resets;
-	const struct qcom_reset_map *map;
-	u32 value;
-
-	map = &reset_map[rst->id];
-
-	value = readl(priv->base + map->reg);
-	value |= BIT(map->bit);
-	writel(value, priv->base + map->reg);
-
-	return 0;
-}
-
-static int qcom_reset_deassert(struct reset_ctl *rst)
-{
-	struct qcom_reset_priv *priv = dev_get_priv(rst->dev);
-	const struct qcom_reset_map *reset_map = gcc_qcom_resets;
-	const struct qcom_reset_map *map;
-	u32 value;
-
-	map = &reset_map[rst->id];
-
-	value = readl(priv->base + map->reg);
-	value &= ~BIT(map->bit);
-	writel(value, priv->base + map->reg);
-
-	return 0;
-}
-
-static const struct reset_ops qcom_reset_ops = {
-	.rst_assert = qcom_reset_assert,
-	.rst_deassert = qcom_reset_deassert,
-};
-
-static const struct udevice_id qcom_reset_ids[] = {
-	{ .compatible = "qcom,gcc-reset-ipq4019" },
-	{ .compatible = "qcom,gcc-reset-qcs404" },
-	{ }
-};
-
-static int qcom_reset_probe(struct udevice *dev)
-{
-	struct qcom_reset_priv *priv = dev_get_priv(dev);
-
-	priv->base = dev_read_addr(dev);
-	if (priv->base == FDT_ADDR_T_NONE)
-		return -EINVAL;
-
-	return 0;
-}
-
-U_BOOT_DRIVER(qcom_reset) = {
-	.name = "qcom_reset",
-	.id = UCLASS_RESET,
-	.of_match = qcom_reset_ids,
-	.ops = &qcom_reset_ops,
-	.probe = qcom_reset_probe,
-	.priv_auto = sizeof(struct qcom_reset_priv),
-};
diff --git a/include/dt-bindings/clock/qcom,ipq4019-gcc.h b/include/dt-bindings/clock/qcom,gcc-ipq4019.h
similarity index 58%
rename from include/dt-bindings/clock/qcom,ipq4019-gcc.h
rename to include/dt-bindings/clock/qcom,gcc-ipq4019.h
index 7130e222e41c..7e8a7be6dcda 100644
--- a/include/dt-bindings/clock/qcom,ipq4019-gcc.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq4019.h
@@ -93,4 +93,77 @@
 #define GCC_APSS_CPU_PLLDIV_CLK				74
 #define GCC_PCNOC_AHB_CLK_SRC				75
 
+#define WIFI0_CPU_INIT_RESET				0
+#define WIFI0_RADIO_SRIF_RESET				1
+#define WIFI0_RADIO_WARM_RESET				2
+#define WIFI0_RADIO_COLD_RESET				3
+#define WIFI0_CORE_WARM_RESET				4
+#define WIFI0_CORE_COLD_RESET				5
+#define WIFI1_CPU_INIT_RESET				6
+#define WIFI1_RADIO_SRIF_RESET				7
+#define WIFI1_RADIO_WARM_RESET				8
+#define WIFI1_RADIO_COLD_RESET				9
+#define WIFI1_CORE_WARM_RESET				10
+#define WIFI1_CORE_COLD_RESET				11
+#define USB3_UNIPHY_PHY_ARES				12
+#define USB3_HSPHY_POR_ARES				13
+#define USB3_HSPHY_S_ARES				14
+#define USB2_HSPHY_POR_ARES				15
+#define USB2_HSPHY_S_ARES				16
+#define PCIE_PHY_AHB_ARES				17
+#define PCIE_AHB_ARES					18
+#define PCIE_PWR_ARES					19
+#define PCIE_PIPE_STICKY_ARES				20
+#define PCIE_AXI_M_STICKY_ARES				21
+#define PCIE_PHY_ARES					22
+#define PCIE_PARF_XPU_ARES				23
+#define PCIE_AXI_S_XPU_ARES				24
+#define PCIE_AXI_M_VMIDMT_ARES				25
+#define PCIE_PIPE_ARES					26
+#define PCIE_AXI_S_ARES					27
+#define PCIE_AXI_M_ARES					28
+#define ESS_RESET					29
+#define GCC_BLSP1_BCR					30
+#define GCC_BLSP1_QUP1_BCR				31
+#define GCC_BLSP1_UART1_BCR				32
+#define GCC_BLSP1_QUP2_BCR				33
+#define GCC_BLSP1_UART2_BCR				34
+#define GCC_BIMC_BCR					35
+#define GCC_TLMM_BCR					36
+#define GCC_IMEM_BCR					37
+#define GCC_ESS_BCR					38
+#define GCC_PRNG_BCR					39
+#define GCC_BOOT_ROM_BCR				40
+#define GCC_CRYPTO_BCR					41
+#define GCC_SDCC1_BCR					42
+#define GCC_SEC_CTRL_BCR				43
+#define GCC_AUDIO_BCR					44
+#define GCC_QPIC_BCR					45
+#define GCC_PCIE_BCR					46
+#define GCC_USB2_BCR					47
+#define GCC_USB2_PHY_BCR				48
+#define GCC_USB3_BCR					49
+#define GCC_USB3_PHY_BCR				50
+#define GCC_SYSTEM_NOC_BCR				51
+#define GCC_PCNOC_BCR					52
+#define GCC_DCD_BCR					53
+#define GCC_SNOC_BUS_TIMEOUT0_BCR			54
+#define GCC_SNOC_BUS_TIMEOUT1_BCR			55
+#define GCC_SNOC_BUS_TIMEOUT2_BCR			56
+#define GCC_SNOC_BUS_TIMEOUT3_BCR			57
+#define GCC_PCNOC_BUS_TIMEOUT0_BCR			58
+#define GCC_PCNOC_BUS_TIMEOUT1_BCR			59
+#define GCC_PCNOC_BUS_TIMEOUT2_BCR			60
+#define GCC_PCNOC_BUS_TIMEOUT3_BCR			61
+#define GCC_PCNOC_BUS_TIMEOUT4_BCR			62
+#define GCC_PCNOC_BUS_TIMEOUT5_BCR			63
+#define GCC_PCNOC_BUS_TIMEOUT6_BCR			64
+#define GCC_PCNOC_BUS_TIMEOUT7_BCR			65
+#define GCC_PCNOC_BUS_TIMEOUT8_BCR			66
+#define GCC_PCNOC_BUS_TIMEOUT9_BCR			67
+#define GCC_TCSR_BCR					68
+#define GCC_QDSS_BCR					69
+#define GCC_MPM_BCR					70
+#define GCC_SPDM_BCR					71
+
 #endif
diff --git a/include/dt-bindings/reset/qcom,ipq4019-reset.h b/include/dt-bindings/reset/qcom,ipq4019-reset.h
deleted file mode 100644
index ed047d7402df..000000000000
--- a/include/dt-bindings/reset/qcom,ipq4019-reset.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/* Copyright (c) 2015 The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-#ifndef __QCOM_RESET_IPQ4019_H__
-#define __QCOM_RESET_IPQ4019_H__
-
-#define WIFI0_CPU_INIT_RESET				0
-#define WIFI0_RADIO_SRIF_RESET				1
-#define WIFI0_RADIO_WARM_RESET				2
-#define WIFI0_RADIO_COLD_RESET				3
-#define WIFI0_CORE_WARM_RESET				4
-#define WIFI0_CORE_COLD_RESET				5
-#define WIFI1_CPU_INIT_RESET				6
-#define WIFI1_RADIO_SRIF_RESET				7
-#define WIFI1_RADIO_WARM_RESET				8
-#define WIFI1_RADIO_COLD_RESET				9
-#define WIFI1_CORE_WARM_RESET				10
-#define WIFI1_CORE_COLD_RESET				11
-#define USB3_UNIPHY_PHY_ARES				12
-#define USB3_HSPHY_POR_ARES				13
-#define USB3_HSPHY_S_ARES				14
-#define USB2_HSPHY_POR_ARES				15
-#define USB2_HSPHY_S_ARES				16
-#define PCIE_PHY_AHB_ARES				17
-#define PCIE_AHB_ARES					18
-#define PCIE_PWR_ARES					19
-#define PCIE_PIPE_STICKY_ARES				20
-#define PCIE_AXI_M_STICKY_ARES				21
-#define PCIE_PHY_ARES					22
-#define PCIE_PARF_XPU_ARES				23
-#define PCIE_AXI_S_XPU_ARES				24
-#define PCIE_AXI_M_VMIDMT_ARES				25
-#define PCIE_PIPE_ARES					26
-#define PCIE_AXI_S_ARES					27
-#define PCIE_AXI_M_ARES					28
-#define ESS_RESET					29
-#define GCC_BLSP1_BCR					30
-#define GCC_BLSP1_QUP1_BCR				31
-#define GCC_BLSP1_UART1_BCR				32
-#define GCC_BLSP1_QUP2_BCR				33
-#define GCC_BLSP1_UART2_BCR				34
-#define GCC_BIMC_BCR					35
-#define GCC_TLMM_BCR					36
-#define GCC_IMEM_BCR					37
-#define GCC_ESS_BCR					38
-#define GCC_PRNG_BCR					39
-#define GCC_BOOT_ROM_BCR				40
-#define GCC_CRYPTO_BCR					41
-#define GCC_SDCC1_BCR					42
-#define GCC_SEC_CTRL_BCR				43
-#define GCC_AUDIO_BCR					44
-#define GCC_QPIC_BCR					45
-#define GCC_PCIE_BCR					46
-#define GCC_USB2_BCR					47
-#define GCC_USB2_PHY_BCR				48
-#define GCC_USB3_BCR					49
-#define GCC_USB3_PHY_BCR				50
-#define GCC_SYSTEM_NOC_BCR				51
-#define GCC_PCNOC_BCR					52
-#define GCC_DCD_BCR					53
-#define GCC_SNOC_BUS_TIMEOUT0_BCR			54
-#define GCC_SNOC_BUS_TIMEOUT1_BCR			55
-#define GCC_SNOC_BUS_TIMEOUT2_BCR			56
-#define GCC_SNOC_BUS_TIMEOUT3_BCR			57
-#define GCC_PCNOC_BUS_TIMEOUT0_BCR			58
-#define GCC_PCNOC_BUS_TIMEOUT1_BCR			59
-#define GCC_PCNOC_BUS_TIMEOUT2_BCR			60
-#define GCC_PCNOC_BUS_TIMEOUT3_BCR			61
-#define GCC_PCNOC_BUS_TIMEOUT4_BCR			62
-#define GCC_PCNOC_BUS_TIMEOUT5_BCR			63
-#define GCC_PCNOC_BUS_TIMEOUT6_BCR			64
-#define GCC_PCNOC_BUS_TIMEOUT7_BCR			65
-#define GCC_PCNOC_BUS_TIMEOUT8_BCR			66
-#define GCC_PCNOC_BUS_TIMEOUT9_BCR			67
-#define GCC_TCSR_BCR					68
-#define GCC_QDSS_BCR					69
-#define GCC_MPM_BCR					70
-#define GCC_SPDM_BCR					71
-
-#endif

-- 
2.42.0



More information about the U-Boot mailing list