[PATCH v3 2/4] sunxi: binman: Move BL31 and SCP firmware addresses to Kconfig

[Samuel Holland]

This is easier to read than the #ifdef staircase, provides better
visibility into the memory map (alongside the other Kconfig
definitions), and allows these addresses to be reused from code.

Reviewed-by: Simon Glass <sjg at chromium.org>
Signed-off-by: Samuel Holland <samuel at sholland.org>
---

(no changes since v2)

Changes in v2:
 - New patch for v2, split from the .dtsi changes

 arch/arm/dts/sunxi-u-boot.dtsi | 24 +++++++-----------------
 arch/arm/mach-sunxi/Kconfig    | 17 +++++++++++++++++
 2 files changed, 24 insertions(+), 17 deletions(-)

diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi
index a0c8abb7033..7a8764e463b 100644
--- a/arch/arm/dts/sunxi-u-boot.dtsi
+++ b/arch/arm/dts/sunxi-u-boot.dtsi
@@ -1,15 +1,5 @@
 #include <config.h>
 
-#ifdef CONFIG_MACH_SUN50I_H6
-#define BL31_ADDR 0x104000
-#define  SCP_ADDR 0x114000
-#elif defined(CONFIG_MACH_SUN50I_H616)
-#define BL31_ADDR 0x40000000
-#else
-#define BL31_ADDR  0x44000
-#define  SCP_ADDR  0x50000
-#endif
-
 / {
 	aliases {
 		mmc0 = &mmc0;
@@ -69,8 +59,8 @@
 					os = "arm-trusted-firmware";
 					arch = "arm64";
 					compression = "none";
-					load = <BL31_ADDR>;
-					entry = <BL31_ADDR>;
+					load = <CONFIG_SUNXI_BL31_BASE>;
+					entry = <CONFIG_SUNXI_BL31_BASE>;
 
 					atf-bl31 {
 						filename = "bl31.bin";
@@ -78,13 +68,13 @@
 					};
 				};
 
-#ifdef SCP_ADDR
+#if CONFIG_SUNXI_SCP_BASE
 				scp {
 					description = "SCP firmware";
 					type = "firmware";
 					arch = "or1k";
 					compression = "none";
-					load = <SCP_ADDR>;
+					load = <CONFIG_SUNXI_SCP_BASE>;
 
 					scp {
 						filename = "scp.bin";
@@ -106,10 +96,10 @@
 				@config-SEQ {
 					description = "NAME";
 					firmware = "atf";
-#ifndef SCP_ADDR
-					loadables = "uboot";
-#else
+#if CONFIG_SUNXI_SCP_BASE
 					loadables = "scp", "uboot";
+#else
+					loadables = "uboot";
 #endif
 					fdt = "fdt-SEQ";
 				};
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index a10e4c06b6a..b0fbda0aa09 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -155,6 +155,23 @@ config SUNXI_RVBAR_ALTERNATIVE
 	for all other SoCs, so the content of the SRAM_VER_REG becomes
 	irrelevant there, and we can use the same code.
 
+config SUNXI_BL31_BASE
+	hex
+	default 0x00044000 if MACH_SUN50I || MACH_SUN50I_H5
+	default 0x00104000 if MACH_SUN50I_H6
+	default 0x40000000 if MACH_SUN50I_H616
+	default 0x0
+	help
+	  Address where BL31 (TF-A) is loaded, or zero if BL31 is not used.
+
+config SUNXI_SCP_BASE
+	hex
+	default 0x00050000 if MACH_SUN50I || MACH_SUN50I_H5
+	default 0x00114000 if MACH_SUN50I_H6
+	default 0x0
+	help
+	  Address where SCP firmware is loaded, or zero if it is not used.
+
 config SUNXI_A64_TIMER_ERRATUM
 	bool
 
-- 
2.41.0