[PATCH 2/2] sunxi: mmc: Move header to the driver directory

Jaehoon Chung jh80.chung at samsung.com
Tue Oct 31 07:30:28 CET 2023



> -----Original Message-----
> From: Samuel Holland <samuel at sholland.org>
> Sent: Tuesday, October 31, 2023 2:23 PM
> To: u-boot at lists.denx.de; Jagan Teki <jagan at amarulasolutions.com>; Andre Przywara
> <andre.przywara at arm.com>
> Cc: Samuel Holland <samuel at sholland.org>; Jaehoon Chung <jh80.chung at samsung.com>; Peng Fan
> <peng.fan at nxp.com>
> Subject: [PATCH 2/2] sunxi: mmc: Move header to the driver directory
> 
> The MMC controller driver is (and ought to be) the only user of these
> register definitions. Put them in a header next to the driver to remove
> the dependency on a specific ARM platform's headers.
> 
> Due to the sunxi_mmc_init() prototype, the file was not renamed. None of
> the register definitions were changed.
> 
> Signed-off-by: Samuel Holland <samuel at sholland.org>


Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung

> ---
> 
>  arch/arm/include/asm/arch-sunxi/mmc.h | 139 +-------------------------
>  drivers/mmc/sunxi_mmc.c               |   4 +
>  drivers/mmc/sunxi_mmc.h               | 138 +++++++++++++++++++++++++
>  3 files changed, 146 insertions(+), 135 deletions(-)
>  create mode 100644 drivers/mmc/sunxi_mmc.h
> 
> diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
> index 8ed3e0459c9..b8d91b5c64b 100644
> --- a/arch/arm/include/asm/arch-sunxi/mmc.h
> +++ b/arch/arm/include/asm/arch-sunxi/mmc.h
> @@ -1,139 +1,8 @@
>  /* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * (C) Copyright 2007-2011
> - * Allwinner Technology Co., Ltd. <https://protect2.fireeye.com/v1/url?k=4cb2b925-2d39ac0a-4cb3326a-
> 74fe485cbfe7-043aa1e18727af33&q=1&e=c27b74b1-be1d-4124-b8c0-
> 7d4a5f8076a3&u=http%3A%2F%2Fwww.allwinnertech.com%2F>
> - * Aaron <leafy.myeh at allwinnertech.com>
> - *
> - * MMC register definition for allwinner sunxi platform.
> - */
> 
> -#ifndef _SUNXI_MMC_H
> -#define _SUNXI_MMC_H
> -
> -#include <linux/types.h>
> -
> -struct sunxi_mmc {
> -	u32 gctrl;		/* 0x00 global control */
> -	u32 clkcr;		/* 0x04 clock control */
> -	u32 timeout;		/* 0x08 time out */
> -	u32 width;		/* 0x0c bus width */
> -	u32 blksz;		/* 0x10 block size */
> -	u32 bytecnt;		/* 0x14 byte count */
> -	u32 cmd;		/* 0x18 command */
> -	u32 arg;		/* 0x1c argument */
> -	u32 resp0;		/* 0x20 response 0 */
> -	u32 resp1;		/* 0x24 response 1 */
> -	u32 resp2;		/* 0x28 response 2 */
> -	u32 resp3;		/* 0x2c response 3 */
> -	u32 imask;		/* 0x30 interrupt mask */
> -	u32 mint;		/* 0x34 masked interrupt status */
> -	u32 rint;		/* 0x38 raw interrupt status */
> -	u32 status;		/* 0x3c status */
> -	u32 ftrglevel;		/* 0x40 FIFO threshold watermark*/
> -	u32 funcsel;		/* 0x44 function select */
> -	u32 cbcr;		/* 0x48 CIU byte count */
> -	u32 bbcr;		/* 0x4c BIU byte count */
> -	u32 dbgc;		/* 0x50 debug enable */
> -	u32 res0;		/* 0x54 reserved */
> -	u32 a12a;		/* 0x58 Auto command 12 argument */
> -	u32 ntsr;		/* 0x5c	New timing set register */
> -	u32 res1[8];
> -	u32 dmac;		/* 0x80 internal DMA control */
> -	u32 dlba;		/* 0x84 internal DMA descr list base address */
> -	u32 idst;		/* 0x88 internal DMA status */
> -	u32 idie;		/* 0x8c internal DMA interrupt enable */
> -	u32 chda;		/* 0x90 */
> -	u32 cbda;		/* 0x94 */
> -	u32 res2[26];
> -#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6) ||
> defined(CONFIG_SUNXI_GEN_NCAT2)
> -	u32 res3[17];
> -	u32 samp_dl;
> -	u32 res4[46];
> -#endif
> -	u32 fifo;		/* 0x100 / 0x200 FIFO access address */
> -};
> -
> -#define SUNXI_MMC_CLK_POWERSAVE		(0x1 << 17)
> -#define SUNXI_MMC_CLK_ENABLE		(0x1 << 16)
> -#define SUNXI_MMC_CLK_DIVIDER_MASK	(0xff)
> -
> -#define SUNXI_MMC_GCTRL_SOFT_RESET	(0x1 << 0)
> -#define SUNXI_MMC_GCTRL_FIFO_RESET	(0x1 << 1)
> -#define SUNXI_MMC_GCTRL_DMA_RESET	(0x1 << 2)
> -#define SUNXI_MMC_GCTRL_RESET		(SUNXI_MMC_GCTRL_SOFT_RESET|\
> -					 SUNXI_MMC_GCTRL_FIFO_RESET|\
> -					 SUNXI_MMC_GCTRL_DMA_RESET)
> -#define SUNXI_MMC_GCTRL_DMA_ENABLE	(0x1 << 5)
> -#define SUNXI_MMC_GCTRL_ACCESS_BY_AHB   (0x1 << 31)
> -
> -#define SUNXI_MMC_CMD_RESP_EXPIRE	(0x1 << 6)
> -#define SUNXI_MMC_CMD_LONG_RESPONSE	(0x1 << 7)
> -#define SUNXI_MMC_CMD_CHK_RESPONSE_CRC	(0x1 << 8)
> -#define SUNXI_MMC_CMD_DATA_EXPIRE	(0x1 << 9)
> -#define SUNXI_MMC_CMD_WRITE		(0x1 << 10)
> -#define SUNXI_MMC_CMD_AUTO_STOP		(0x1 << 12)
> -#define SUNXI_MMC_CMD_WAIT_PRE_OVER	(0x1 << 13)
> -#define SUNXI_MMC_CMD_SEND_INIT_SEQ	(0x1 << 15)
> -#define SUNXI_MMC_CMD_UPCLK_ONLY	(0x1 << 21)
> -#define SUNXI_MMC_CMD_START		(0x1 << 31)
> -
> -#define SUNXI_MMC_RINT_RESP_ERROR		(0x1 << 1)
> -#define SUNXI_MMC_RINT_COMMAND_DONE		(0x1 << 2)
> -#define SUNXI_MMC_RINT_DATA_OVER		(0x1 << 3)
> -#define SUNXI_MMC_RINT_TX_DATA_REQUEST		(0x1 << 4)
> -#define SUNXI_MMC_RINT_RX_DATA_REQUEST		(0x1 << 5)
> -#define SUNXI_MMC_RINT_RESP_CRC_ERROR		(0x1 << 6)
> -#define SUNXI_MMC_RINT_DATA_CRC_ERROR		(0x1 << 7)
> -#define SUNXI_MMC_RINT_RESP_TIMEOUT		(0x1 << 8)
> -#define SUNXI_MMC_RINT_DATA_TIMEOUT		(0x1 << 9)
> -#define SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE	(0x1 << 10)
> -#define SUNXI_MMC_RINT_FIFO_RUN_ERROR		(0x1 << 11)
> -#define SUNXI_MMC_RINT_HARD_WARE_LOCKED		(0x1 << 12)
> -#define SUNXI_MMC_RINT_START_BIT_ERROR		(0x1 << 13)
> -#define SUNXI_MMC_RINT_AUTO_COMMAND_DONE	(0x1 << 14)
> -#define SUNXI_MMC_RINT_END_BIT_ERROR		(0x1 << 15)
> -#define SUNXI_MMC_RINT_SDIO_INTERRUPT		(0x1 << 16)
> -#define SUNXI_MMC_RINT_CARD_INSERT		(0x1 << 30)
> -#define SUNXI_MMC_RINT_CARD_REMOVE		(0x1 << 31)
> -#define SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT      \
> -	(SUNXI_MMC_RINT_RESP_ERROR |		\
> -	 SUNXI_MMC_RINT_RESP_CRC_ERROR |	\
> -	 SUNXI_MMC_RINT_DATA_CRC_ERROR |	\
> -	 SUNXI_MMC_RINT_RESP_TIMEOUT |		\
> -	 SUNXI_MMC_RINT_DATA_TIMEOUT |		\
> -	 SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE |	\
> -	 SUNXI_MMC_RINT_FIFO_RUN_ERROR |	\
> -	 SUNXI_MMC_RINT_HARD_WARE_LOCKED |	\
> -	 SUNXI_MMC_RINT_START_BIT_ERROR |	\
> -	 SUNXI_MMC_RINT_END_BIT_ERROR) /* 0xbfc2 */
> -#define SUNXI_MMC_RINT_INTERRUPT_DONE_BIT	\
> -	(SUNXI_MMC_RINT_AUTO_COMMAND_DONE |	\
> -	 SUNXI_MMC_RINT_DATA_OVER |		\
> -	 SUNXI_MMC_RINT_COMMAND_DONE |		\
> -	 SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE)
> -
> -#define SUNXI_MMC_STATUS_RXWL_FLAG		(0x1 << 0)
> -#define SUNXI_MMC_STATUS_TXWL_FLAG		(0x1 << 1)
> -#define SUNXI_MMC_STATUS_FIFO_EMPTY		(0x1 << 2)
> -#define SUNXI_MMC_STATUS_FIFO_FULL		(0x1 << 3)
> -#define SUNXI_MMC_STATUS_CARD_PRESENT		(0x1 << 8)
> -#define SUNXI_MMC_STATUS_CARD_DATA_BUSY		(0x1 << 9)
> -#define SUNXI_MMC_STATUS_DATA_FSM_BUSY		(0x1 << 10)
> -#define SUNXI_MMC_STATUS_FIFO_LEVEL(reg)	(((reg) >> 17) & 0x3fff)
> -
> -#define SUNXI_MMC_NTSR_MODE_SEL_NEW		(0x1 << 31)
> -
> -#define SUNXI_MMC_IDMAC_RESET		(0x1 << 0)
> -#define SUNXI_MMC_IDMAC_FIXBURST	(0x1 << 1)
> -#define SUNXI_MMC_IDMAC_ENABLE		(0x1 << 7)
> -
> -#define SUNXI_MMC_IDIE_TXIRQ		(0x1 << 0)
> -#define SUNXI_MMC_IDIE_RXIRQ		(0x1 << 1)
> -
> -#define SUNXI_MMC_COMMON_CLK_GATE		(1 << 16)
> -#define SUNXI_MMC_COMMON_RESET			(1 << 18)
> -
> -#define SUNXI_MMC_CAL_DL_SW_EN		(0x1 << 7)
> +#ifndef _ASM_ARCH_MMC_H_
> +#define _ASM_ARCH_MMC_H_
> 
>  struct mmc *sunxi_mmc_init(int sdc_no);
> -#endif /* _SUNXI_MMC_H */
> +
> +#endif /* _ASM_ARCH_MMC_H_ */
> diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
> index 7caefa153dc..714706d2411 100644
> --- a/drivers/mmc/sunxi_mmc.c
> +++ b/drivers/mmc/sunxi_mmc.c
> @@ -25,10 +25,14 @@
>  #include <asm/io.h>
>  #include <asm/arch/clock.h>
>  #include <asm/arch/cpu.h>
> +#if !CONFIG_IS_ENABLED(DM_MMC)
>  #include <asm/arch/mmc.h>
> +#endif
>  #include <linux/delay.h>
>  #include <sunxi_gpio.h>
> 
> +#include "sunxi_mmc.h"
> +
>  #ifndef CCM_MMC_CTRL_MODE_SEL_NEW
>  #define CCM_MMC_CTRL_MODE_SEL_NEW	0
>  #endif
> diff --git a/drivers/mmc/sunxi_mmc.h b/drivers/mmc/sunxi_mmc.h
> new file mode 100644
> index 00000000000..f4ae5a790c8
> --- /dev/null
> +++ b/drivers/mmc/sunxi_mmc.h
> @@ -0,0 +1,138 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) Copyright 2007-2011
> + * Allwinner Technology Co., Ltd. <https://protect2.fireeye.com/v1/url?k=31fd542e-50764101-31fcdf61-
> 74fe485cbfe7-6b37535e8d2e0d96&q=1&e=c27b74b1-be1d-4124-b8c0-
> 7d4a5f8076a3&u=http%3A%2F%2Fwww.allwinnertech.com%2F>
> + * Aaron <leafy.myeh at allwinnertech.com>
> + *
> + * MMC register definition for allwinner sunxi platform.
> + */
> +
> +#ifndef _SUNXI_MMC_H
> +#define _SUNXI_MMC_H
> +
> +#include <linux/types.h>
> +
> +struct sunxi_mmc {
> +	u32 gctrl;		/* 0x00 global control */
> +	u32 clkcr;		/* 0x04 clock control */
> +	u32 timeout;		/* 0x08 time out */
> +	u32 width;		/* 0x0c bus width */
> +	u32 blksz;		/* 0x10 block size */
> +	u32 bytecnt;		/* 0x14 byte count */
> +	u32 cmd;		/* 0x18 command */
> +	u32 arg;		/* 0x1c argument */
> +	u32 resp0;		/* 0x20 response 0 */
> +	u32 resp1;		/* 0x24 response 1 */
> +	u32 resp2;		/* 0x28 response 2 */
> +	u32 resp3;		/* 0x2c response 3 */
> +	u32 imask;		/* 0x30 interrupt mask */
> +	u32 mint;		/* 0x34 masked interrupt status */
> +	u32 rint;		/* 0x38 raw interrupt status */
> +	u32 status;		/* 0x3c status */
> +	u32 ftrglevel;		/* 0x40 FIFO threshold watermark*/
> +	u32 funcsel;		/* 0x44 function select */
> +	u32 cbcr;		/* 0x48 CIU byte count */
> +	u32 bbcr;		/* 0x4c BIU byte count */
> +	u32 dbgc;		/* 0x50 debug enable */
> +	u32 res0;		/* 0x54 reserved */
> +	u32 a12a;		/* 0x58 Auto command 12 argument */
> +	u32 ntsr;		/* 0x5c	New timing set register */
> +	u32 res1[8];
> +	u32 dmac;		/* 0x80 internal DMA control */
> +	u32 dlba;		/* 0x84 internal DMA descr list base address */
> +	u32 idst;		/* 0x88 internal DMA status */
> +	u32 idie;		/* 0x8c internal DMA interrupt enable */
> +	u32 chda;		/* 0x90 */
> +	u32 cbda;		/* 0x94 */
> +	u32 res2[26];
> +#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6) ||
> defined(CONFIG_SUNXI_GEN_NCAT2)
> +	u32 res3[17];
> +	u32 samp_dl;
> +	u32 res4[46];
> +#endif
> +	u32 fifo;		/* 0x100 / 0x200 FIFO access address */
> +};
> +
> +#define SUNXI_MMC_CLK_POWERSAVE		(0x1 << 17)
> +#define SUNXI_MMC_CLK_ENABLE		(0x1 << 16)
> +#define SUNXI_MMC_CLK_DIVIDER_MASK	(0xff)
> +
> +#define SUNXI_MMC_GCTRL_SOFT_RESET	(0x1 << 0)
> +#define SUNXI_MMC_GCTRL_FIFO_RESET	(0x1 << 1)
> +#define SUNXI_MMC_GCTRL_DMA_RESET	(0x1 << 2)
> +#define SUNXI_MMC_GCTRL_RESET		(SUNXI_MMC_GCTRL_SOFT_RESET|\
> +					 SUNXI_MMC_GCTRL_FIFO_RESET|\
> +					 SUNXI_MMC_GCTRL_DMA_RESET)
> +#define SUNXI_MMC_GCTRL_DMA_ENABLE	(0x1 << 5)
> +#define SUNXI_MMC_GCTRL_ACCESS_BY_AHB   (0x1 << 31)
> +
> +#define SUNXI_MMC_CMD_RESP_EXPIRE	(0x1 << 6)
> +#define SUNXI_MMC_CMD_LONG_RESPONSE	(0x1 << 7)
> +#define SUNXI_MMC_CMD_CHK_RESPONSE_CRC	(0x1 << 8)
> +#define SUNXI_MMC_CMD_DATA_EXPIRE	(0x1 << 9)
> +#define SUNXI_MMC_CMD_WRITE		(0x1 << 10)
> +#define SUNXI_MMC_CMD_AUTO_STOP		(0x1 << 12)
> +#define SUNXI_MMC_CMD_WAIT_PRE_OVER	(0x1 << 13)
> +#define SUNXI_MMC_CMD_SEND_INIT_SEQ	(0x1 << 15)
> +#define SUNXI_MMC_CMD_UPCLK_ONLY	(0x1 << 21)
> +#define SUNXI_MMC_CMD_START		(0x1 << 31)
> +
> +#define SUNXI_MMC_RINT_RESP_ERROR		(0x1 << 1)
> +#define SUNXI_MMC_RINT_COMMAND_DONE		(0x1 << 2)
> +#define SUNXI_MMC_RINT_DATA_OVER		(0x1 << 3)
> +#define SUNXI_MMC_RINT_TX_DATA_REQUEST		(0x1 << 4)
> +#define SUNXI_MMC_RINT_RX_DATA_REQUEST		(0x1 << 5)
> +#define SUNXI_MMC_RINT_RESP_CRC_ERROR		(0x1 << 6)
> +#define SUNXI_MMC_RINT_DATA_CRC_ERROR		(0x1 << 7)
> +#define SUNXI_MMC_RINT_RESP_TIMEOUT		(0x1 << 8)
> +#define SUNXI_MMC_RINT_DATA_TIMEOUT		(0x1 << 9)
> +#define SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE	(0x1 << 10)
> +#define SUNXI_MMC_RINT_FIFO_RUN_ERROR		(0x1 << 11)
> +#define SUNXI_MMC_RINT_HARD_WARE_LOCKED		(0x1 << 12)
> +#define SUNXI_MMC_RINT_START_BIT_ERROR		(0x1 << 13)
> +#define SUNXI_MMC_RINT_AUTO_COMMAND_DONE	(0x1 << 14)
> +#define SUNXI_MMC_RINT_END_BIT_ERROR		(0x1 << 15)
> +#define SUNXI_MMC_RINT_SDIO_INTERRUPT		(0x1 << 16)
> +#define SUNXI_MMC_RINT_CARD_INSERT		(0x1 << 30)
> +#define SUNXI_MMC_RINT_CARD_REMOVE		(0x1 << 31)
> +#define SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT      \
> +	(SUNXI_MMC_RINT_RESP_ERROR |		\
> +	 SUNXI_MMC_RINT_RESP_CRC_ERROR |	\
> +	 SUNXI_MMC_RINT_DATA_CRC_ERROR |	\
> +	 SUNXI_MMC_RINT_RESP_TIMEOUT |		\
> +	 SUNXI_MMC_RINT_DATA_TIMEOUT |		\
> +	 SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE |	\
> +	 SUNXI_MMC_RINT_FIFO_RUN_ERROR |	\
> +	 SUNXI_MMC_RINT_HARD_WARE_LOCKED |	\
> +	 SUNXI_MMC_RINT_START_BIT_ERROR |	\
> +	 SUNXI_MMC_RINT_END_BIT_ERROR) /* 0xbfc2 */
> +#define SUNXI_MMC_RINT_INTERRUPT_DONE_BIT	\
> +	(SUNXI_MMC_RINT_AUTO_COMMAND_DONE |	\
> +	 SUNXI_MMC_RINT_DATA_OVER |		\
> +	 SUNXI_MMC_RINT_COMMAND_DONE |		\
> +	 SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE)
> +
> +#define SUNXI_MMC_STATUS_RXWL_FLAG		(0x1 << 0)
> +#define SUNXI_MMC_STATUS_TXWL_FLAG		(0x1 << 1)
> +#define SUNXI_MMC_STATUS_FIFO_EMPTY		(0x1 << 2)
> +#define SUNXI_MMC_STATUS_FIFO_FULL		(0x1 << 3)
> +#define SUNXI_MMC_STATUS_CARD_PRESENT		(0x1 << 8)
> +#define SUNXI_MMC_STATUS_CARD_DATA_BUSY		(0x1 << 9)
> +#define SUNXI_MMC_STATUS_DATA_FSM_BUSY		(0x1 << 10)
> +#define SUNXI_MMC_STATUS_FIFO_LEVEL(reg)	(((reg) >> 17) & 0x3fff)
> +
> +#define SUNXI_MMC_NTSR_MODE_SEL_NEW		(0x1 << 31)
> +
> +#define SUNXI_MMC_IDMAC_RESET		(0x1 << 0)
> +#define SUNXI_MMC_IDMAC_FIXBURST	(0x1 << 1)
> +#define SUNXI_MMC_IDMAC_ENABLE		(0x1 << 7)
> +
> +#define SUNXI_MMC_IDIE_TXIRQ		(0x1 << 0)
> +#define SUNXI_MMC_IDIE_RXIRQ		(0x1 << 1)
> +
> +#define SUNXI_MMC_COMMON_CLK_GATE		(1 << 16)
> +#define SUNXI_MMC_COMMON_RESET			(1 << 18)
> +
> +#define SUNXI_MMC_CAL_DL_SW_EN		(0x1 << 7)
> +
> +#endif /* _SUNXI_MMC_H */
> --
> 2.41.0




More information about the U-Boot mailing list