[RFC v2 2/2] rng: Provide a RNG based on the RISC-V Zkr ISA extension

[Heinrich Schuchardt]

merle w <merlew4n6 at gmail.com> schrieb am Di., 31. Okt. 2023, 08:16:

> drivers/rng/riscv_zkr_rng.c:10:10: fatal error: interrupt.h: No such
> file or directory
> 10 | #include <interrupt.h>
> | ^~~~~~~~~~~~~
> compilation terminated.
>
> Where is this interrupt.h?
>


Please, see patch 1/2.

Best regards

Heinrich


> Regards,
> Xiang W
>
> Heinrich Schuchardt <heinrich.schuchardt at canonical.com> 于2023年10月29日周日
> 16:46写道：
> >
> > The Zkr ISA extension (ratified Nov 2021) introduced the seed CSR. It
> > provides an interface to a physical entropy source.
> >
> > A RNG driver based on the seed CSR is provided. It depends on
> > mseccfg.sseed being set in the SBI firmware.
> >
> > Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
> > ---
> > v2:
> >         Resume after exception if seed CSR cannot be read.
> > ---
> >  drivers/rng/Kconfig         |   8 +++
> >  drivers/rng/Makefile        |   1 +
> >  drivers/rng/riscv_zkr_rng.c | 116 ++++++++++++++++++++++++++++++++++++
> >  3 files changed, 125 insertions(+)
> >  create mode 100644 drivers/rng/riscv_zkr_rng.c
> >
> > diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig
> > index 994cc35b27..4f6e367169 100644
> > --- a/drivers/rng/Kconfig
> > +++ b/drivers/rng/Kconfig
> > @@ -48,6 +48,14 @@ config RNG_OPTEE
> >           accessible to normal world but reserved and used by the OP-TEE
> >           to avoid the weakness of a software PRNG.
> >
> > +config RNG_RISCV_ZKR
> > +       bool "RISC-V Zkr random number generator"
> > +       depends on RISCV_SMODE
> > +       help
> > +         This driver provides a Random Number Generator based on the
> > +         Zkr RISC-V ISA extension which provides an interface to an
> > +         NIST SP 800-90B or BSI AIS-31 compliant physical entropy
> source.
> > +
> >  config RNG_STM32
> >         bool "Enable random number generator for STM32"
> >         depends on ARCH_STM32 || ARCH_STM32MP
> > diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile
> > index 47b323e61e..a5d3ca4130 100644
> > --- a/drivers/rng/Makefile
> > +++ b/drivers/rng/Makefile
> > @@ -10,6 +10,7 @@ obj-$(CONFIG_RNG_MSM) += msm_rng.o
> >  obj-$(CONFIG_RNG_NPCM) += npcm_rng.o
> >  obj-$(CONFIG_RNG_OPTEE) += optee_rng.o
> >  obj-$(CONFIG_RNG_STM32) += stm32_rng.o
> > +obj-$(CONFIG_RNG_RISCV_ZKR) += riscv_zkr_rng.o
> >  obj-$(CONFIG_RNG_ROCKCHIP) += rockchip_rng.o
> >  obj-$(CONFIG_RNG_IPROC200) += iproc_rng200.o
> >  obj-$(CONFIG_RNG_SMCCC_TRNG) += smccc_trng.o
> > diff --git a/drivers/rng/riscv_zkr_rng.c b/drivers/rng/riscv_zkr_rng.c
> > new file mode 100644
> > index 0000000000..8c9e111e2e
> > --- /dev/null
> > +++ b/drivers/rng/riscv_zkr_rng.c
> > @@ -0,0 +1,116 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * The RISC-V Zkr extension provides CSR seed which provides access to a
> > + * random number generator.
> > + */
> > +
> > +#define LOG_CATEGORY UCLASS_RNG
> > +
> > +#include <dm.h>
> > +#include <interrupt.h>
> > +#include <log.h>
> > +#include <rng.h>
> > +
> > +#define DRIVER_NAME "riscv_zkr"
> > +
> > +enum opst {
> > +       /** @BIST: built in self test running */
> > +       BIST = 0b00,
> > +       /** @WAIT: sufficient amount of entropy is not yet available */
> > +       WAIT = 0b01,
> > +       /** @ES16: 16bits of entropy available */
> > +       ES16 = 0b10,
> > +       /** @DEAD: unrecoverable self-test error */
> > +       DEAD = 0b11,
> > +};
> > +
> > +static unsigned long read_seed(void)
> > +{
> > +       unsigned long ret;
> > +
> > +       __asm__ __volatile__("csrrw %0, seed, x0" : "=r" (ret) : :
> "memory");
> > +
> > +       return ret;
> > +}
> > +
> > +static int riscv_zkr_read(struct udevice *dev, void *data, size_t len)
> > +{
> > +       u8 *ptr = data;
> > +
> > +       while (len) {
> > +               u32 val;
> > +
> > +               val = read_seed();
> > +
> > +               switch (val >> 30) {
> > +               case BIST:
> > +                       continue;
> > +               case WAIT:
> > +                       continue;
> > +               case ES16:
> > +                       *ptr++ = val & 0xff;
> > +                       if (--len) {
> > +                               *ptr++ = val >> 8;
> > +                               --len;
> > +                       }
> > +                       break;
> > +               case DEAD:
> > +                       return -ENODEV;
> > +               }
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +/**
> > + * riscv_zkr_probe() - check if the seed register is available
> > + *
> > + * If the SBI software has not set mseccfg.sseed=1 or the Zkr
> > + * extension is not available this probe function will result
> > + * in an exception. Currently we cannot recover from this.
> > + *
> > + * @dev:       RNG device
> > + * Return:     0 if successfully probed
> > + */
> > +static int riscv_zkr_probe(struct udevice *dev)
> > +{
> > +       struct resume_data resume;
> > +       int ret;
> > +       u32 val;
> > +
> > +       /* Check if reading seed leads to interrupt */
> > +       set_resume(&resume);
> > +       ret = setjmp(resume.jump);
> > +       if (ret)
> > +               log_debug("Exception %ld reading seed CSR\n",
> resume.code);
> > +       else
> > +               val = read_seed();
> > +       set_resume(NULL);
> > +       if (ret)
> > +               return -ENODEV;
> > +
> > +       do {
> > +               val = read_seed();
> > +               val >>= 30;
> > +       } while (val == BIST || val == WAIT);
> > +
> > +       if (val == DEAD)
> > +               return -ENODEV;
> > +
> > +       return 0;
> > +}
> > +
> > +static const struct dm_rng_ops riscv_zkr_ops = {
> > +       .read = riscv_zkr_read,
> > +};
> > +
> > +U_BOOT_DRIVER(riscv_zkr) = {
> > +       .name = DRIVER_NAME,
> > +       .id = UCLASS_RNG,
> > +       .ops = &riscv_zkr_ops,
> > +       .probe = riscv_zkr_probe,
> > +};
> > +
> > +U_BOOT_DRVINFO(cpu_riscv_zkr) = {
> > +       .name = DRIVER_NAME,
> > +};
> > --
> > 2.40.1
> >
>