[PATCH v3 2/2] rng: Provide a RNG based on the RISC-V Zkr ISA extension
Heinrich Schuchardt
heinrich.schuchardt at canonical.com
Tue Oct 31 13:55:52 CET 2023
The Zkr ISA extension (ratified Nov 2021) introduced the seed CSR. It
provides an interface to a physical entropy source.
A RNG driver based on the seed CSR is provided. It depends on
mseccfg.sseed being set in the SBI firmware.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang at andestech.com>
---
v3:
no change
v2:
catch exceptions
---
drivers/rng/Kconfig | 8 +++
drivers/rng/Makefile | 1 +
drivers/rng/riscv_zkr_rng.c | 116 ++++++++++++++++++++++++++++++++++++
3 files changed, 125 insertions(+)
create mode 100644 drivers/rng/riscv_zkr_rng.c
diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig
index 994cc35b27..4f6e367169 100644
--- a/drivers/rng/Kconfig
+++ b/drivers/rng/Kconfig
@@ -48,6 +48,14 @@ config RNG_OPTEE
accessible to normal world but reserved and used by the OP-TEE
to avoid the weakness of a software PRNG.
+config RNG_RISCV_ZKR
+ bool "RISC-V Zkr random number generator"
+ depends on RISCV_SMODE
+ help
+ This driver provides a Random Number Generator based on the
+ Zkr RISC-V ISA extension which provides an interface to an
+ NIST SP 800-90B or BSI AIS-31 compliant physical entropy source.
+
config RNG_STM32
bool "Enable random number generator for STM32"
depends on ARCH_STM32 || ARCH_STM32MP
diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile
index 47b323e61e..a5d3ca4130 100644
--- a/drivers/rng/Makefile
+++ b/drivers/rng/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_RNG_MSM) += msm_rng.o
obj-$(CONFIG_RNG_NPCM) += npcm_rng.o
obj-$(CONFIG_RNG_OPTEE) += optee_rng.o
obj-$(CONFIG_RNG_STM32) += stm32_rng.o
+obj-$(CONFIG_RNG_RISCV_ZKR) += riscv_zkr_rng.o
obj-$(CONFIG_RNG_ROCKCHIP) += rockchip_rng.o
obj-$(CONFIG_RNG_IPROC200) += iproc_rng200.o
obj-$(CONFIG_RNG_SMCCC_TRNG) += smccc_trng.o
diff --git a/drivers/rng/riscv_zkr_rng.c b/drivers/rng/riscv_zkr_rng.c
new file mode 100644
index 0000000000..8c9e111e2e
--- /dev/null
+++ b/drivers/rng/riscv_zkr_rng.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * The RISC-V Zkr extension provides CSR seed which provides access to a
+ * random number generator.
+ */
+
+#define LOG_CATEGORY UCLASS_RNG
+
+#include <dm.h>
+#include <interrupt.h>
+#include <log.h>
+#include <rng.h>
+
+#define DRIVER_NAME "riscv_zkr"
+
+enum opst {
+ /** @BIST: built in self test running */
+ BIST = 0b00,
+ /** @WAIT: sufficient amount of entropy is not yet available */
+ WAIT = 0b01,
+ /** @ES16: 16bits of entropy available */
+ ES16 = 0b10,
+ /** @DEAD: unrecoverable self-test error */
+ DEAD = 0b11,
+};
+
+static unsigned long read_seed(void)
+{
+ unsigned long ret;
+
+ __asm__ __volatile__("csrrw %0, seed, x0" : "=r" (ret) : : "memory");
+
+ return ret;
+}
+
+static int riscv_zkr_read(struct udevice *dev, void *data, size_t len)
+{
+ u8 *ptr = data;
+
+ while (len) {
+ u32 val;
+
+ val = read_seed();
+
+ switch (val >> 30) {
+ case BIST:
+ continue;
+ case WAIT:
+ continue;
+ case ES16:
+ *ptr++ = val & 0xff;
+ if (--len) {
+ *ptr++ = val >> 8;
+ --len;
+ }
+ break;
+ case DEAD:
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * riscv_zkr_probe() - check if the seed register is available
+ *
+ * If the SBI software has not set mseccfg.sseed=1 or the Zkr
+ * extension is not available this probe function will result
+ * in an exception. Currently we cannot recover from this.
+ *
+ * @dev: RNG device
+ * Return: 0 if successfully probed
+ */
+static int riscv_zkr_probe(struct udevice *dev)
+{
+ struct resume_data resume;
+ int ret;
+ u32 val;
+
+ /* Check if reading seed leads to interrupt */
+ set_resume(&resume);
+ ret = setjmp(resume.jump);
+ if (ret)
+ log_debug("Exception %ld reading seed CSR\n", resume.code);
+ else
+ val = read_seed();
+ set_resume(NULL);
+ if (ret)
+ return -ENODEV;
+
+ do {
+ val = read_seed();
+ val >>= 30;
+ } while (val == BIST || val == WAIT);
+
+ if (val == DEAD)
+ return -ENODEV;
+
+ return 0;
+}
+
+static const struct dm_rng_ops riscv_zkr_ops = {
+ .read = riscv_zkr_read,
+};
+
+U_BOOT_DRIVER(riscv_zkr) = {
+ .name = DRIVER_NAME,
+ .id = UCLASS_RNG,
+ .ops = &riscv_zkr_ops,
+ .probe = riscv_zkr_probe,
+};
+
+U_BOOT_DRVINFO(cpu_riscv_zkr) = {
+ .name = DRIVER_NAME,
+};
--
2.40.1
More information about the U-Boot
mailing list