[PATCH v5 02/16] phy: qcom: add Qualcomm QUSB2 USB PHY driver
Sumit Garg
sumit.garg at linaro.org
Mon Apr 1 06:42:53 CEST 2024
On Thu, 28 Mar 2024 at 23:29, Caleb Connolly <caleb.connolly at linaro.org> wrote:
>
> From: Bhupesh Sharma <bhupesh.linux at gmail.com>
>
> The Snapdragon 845 and several other Qualcomm SoCs feature this
> USB high-speed phy. Add a driver for it based on the Linux driver, with
> support for the SDM845, and the QCM2290 and SM6115 SoCs which will gain
> support in U-Boot in future patches.
>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma at linaro.org>
> [code cleanup, switch to clk_bulk]
> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
> ---
> drivers/phy/qcom/Kconfig | 7 +
> drivers/phy/qcom/Makefile | 1 +
> drivers/phy/qcom/phy-qcom-qusb2.c | 429 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 437 insertions(+)
>
Acked-by: Sumit Garg <sumit.garg at linaro.org>
-Sumit
> diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
> index f4ca174805a4..361dfb6e1126 100644
> --- a/drivers/phy/qcom/Kconfig
> +++ b/drivers/phy/qcom/Kconfig
> @@ -11,8 +11,15 @@ config PHY_QCOM_IPQ4019_USB
> depends on PHY && ARCH_IPQ40XX
> help
> Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
>
> +config PHY_QCOM_QUSB2
> + tristate "Qualcomm USB QUSB2 PHY driver"
> + depends on PHY && ARCH_SNAPDRAGON
> + help
> + Enable this to support the Super-Speed USB transceiver on various
> + Qualcomm chipsets.
> +
> config PHY_QCOM_USB_HS_28NM
> tristate "Qualcomm 28nm High-Speed PHY"
> depends on PHY && ARCH_SNAPDRAGON
> help
> diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
> index 2113f178c0c7..f6af985666a4 100644
> --- a/drivers/phy/qcom/Makefile
> +++ b/drivers/phy/qcom/Makefile
> @@ -1,4 +1,5 @@
> obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
> obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o
> +obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
> obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
> obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
> diff --git a/drivers/phy/qcom/phy-qcom-qusb2.c b/drivers/phy/qcom/phy-qcom-qusb2.c
> new file mode 100644
> index 000000000000..c91ba18c4ab1
> --- /dev/null
> +++ b/drivers/phy/qcom/phy-qcom-qusb2.c
> @@ -0,0 +1,429 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2023 Bhupesh Sharma <bhupesh.sharma at linaro.org>
> + *
> + * Based on Linux driver
> + */
> +
> +#include <dm.h>
> +#include <generic-phy.h>
> +#include <linux/bitops.h>
> +#include <asm/io.h>
> +#include <reset.h>
> +#include <clk.h>
> +#include <linux/delay.h>
> +
> +#include <dt-bindings/phy/phy-qcom-qusb2.h>
> +
> +#define QUSB2PHY_PLL 0x0
> +#define QUSB2PHY_PLL_TEST 0x04
> +#define CLK_REF_SEL BIT(7)
> +
> +#define QUSB2PHY_PLL_TUNE 0x08
> +#define QUSB2PHY_PLL_USER_CTL1 0x0c
> +#define QUSB2PHY_PLL_USER_CTL2 0x10
> +#define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c
> +#define QUSB2PHY_PLL_PWR_CTRL 0x18
> +
> +/* QUSB2PHY_PLL_STATUS register bits */
> +#define PLL_LOCKED BIT(5)
> +
> +/* QUSB2PHY_PLL_COMMON_STATUS_ONE register bits */
> +#define CORE_READY_STATUS BIT(0)
> +
> +/* QUSB2PHY_PORT_POWERDOWN register bits */
> +#define CLAMP_N_EN BIT(5)
> +#define FREEZIO_N BIT(1)
> +#define POWER_DOWN BIT(0)
> +
> +/* QUSB2PHY_PWR_CTRL1 register bits */
> +#define PWR_CTRL1_VREF_SUPPLY_TRIM BIT(5)
> +#define PWR_CTRL1_CLAMP_N_EN BIT(1)
> +
> +#define QUSB2PHY_REFCLK_ENABLE BIT(0)
> +
> +#define PHY_CLK_SCHEME_SEL BIT(0)
> +
> +/* QUSB2PHY_INTR_CTRL register bits */
> +#define DMSE_INTR_HIGH_SEL BIT(4)
> +#define DPSE_INTR_HIGH_SEL BIT(3)
> +#define CHG_DET_INTR_EN BIT(2)
> +#define DMSE_INTR_EN BIT(1)
> +#define DPSE_INTR_EN BIT(0)
> +
> +/* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE register bits */
> +#define CORE_PLL_EN_FROM_RESET BIT(4)
> +#define CORE_RESET BIT(5)
> +#define CORE_RESET_MUX BIT(6)
> +
> +/* QUSB2PHY_IMP_CTRL1 register bits */
> +#define IMP_RES_OFFSET_MASK GENMASK(5, 0)
> +#define IMP_RES_OFFSET_SHIFT 0x0
> +
> +/* QUSB2PHY_PLL_BIAS_CONTROL_2 register bits */
> +#define BIAS_CTRL2_RES_OFFSET_MASK GENMASK(5, 0)
> +#define BIAS_CTRL2_RES_OFFSET_SHIFT 0x0
> +
> +/* QUSB2PHY_CHG_CONTROL_2 register bits */
> +#define CHG_CTRL2_OFFSET_MASK GENMASK(5, 4)
> +#define CHG_CTRL2_OFFSET_SHIFT 0x4
> +
> +/* QUSB2PHY_PORT_TUNE1 register bits */
> +#define HSTX_TRIM_MASK GENMASK(7, 4)
> +#define HSTX_TRIM_SHIFT 0x4
> +#define PREEMPH_WIDTH_HALF_BIT BIT(2)
> +#define PREEMPHASIS_EN_MASK GENMASK(1, 0)
> +#define PREEMPHASIS_EN_SHIFT 0x0
> +
> +/* QUSB2PHY_PORT_TUNE2 register bits */
> +#define HSDISC_TRIM_MASK GENMASK(1, 0)
> +#define HSDISC_TRIM_SHIFT 0x0
> +
> +#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04
> +#define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c
> +#define QUSB2PHY_PLL_CMODE 0x2c
> +#define QUSB2PHY_PLL_LOCK_DELAY 0x184
> +#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0xb4
> +#define QUSB2PHY_PLL_BIAS_CONTROL_1 0x194
> +#define QUSB2PHY_PLL_BIAS_CONTROL_2 0x198
> +#define QUSB2PHY_PWR_CTRL2 0x214
> +#define QUSB2PHY_IMP_CTRL1 0x220
> +#define QUSB2PHY_IMP_CTRL2 0x224
> +#define QUSB2PHY_CHG_CTRL2 0x23c
> +
> +struct qusb2_phy_init_tbl {
> + unsigned int offset;
> + unsigned int val;
> + /*
> + * register part of layout ?
> + * if yes, then offset gives index in the reg-layout
> + */
> + int in_layout;
> +};
> +
> +struct qusb2_phy_cfg {
> + const struct qusb2_phy_init_tbl *tbl;
> + /* number of entries in the table */
> + unsigned int tbl_num;
> + /* offset to PHY_CLK_SCHEME register in TCSR map */
> + unsigned int clk_scheme_offset;
> +
> + /* array of registers with different offsets */
> + const unsigned int *regs;
> + unsigned int mask_core_ready;
> + unsigned int disable_ctrl;
> + unsigned int autoresume_en;
> +
> + /* true if PHY has PLL_TEST register to select clk_scheme */
> + bool has_pll_test;
> +
> + /* true if TUNE1 register must be updated by fused value, else TUNE2 */
> + bool update_tune1_with_efuse;
> +
> + /* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */
> + bool has_pll_override;
> +};
> +
> +/* set of registers with offsets different per-PHY */
> +enum qusb2phy_reg_layout {
> + QUSB2PHY_PLL_CORE_INPUT_OVERRIDE,
> + QUSB2PHY_PLL_STATUS,
> + QUSB2PHY_PORT_TUNE1,
> + QUSB2PHY_PORT_TUNE2,
> + QUSB2PHY_PORT_TUNE3,
> + QUSB2PHY_PORT_TUNE4,
> + QUSB2PHY_PORT_TUNE5,
> + QUSB2PHY_PORT_TEST1,
> + QUSB2PHY_PORT_TEST2,
> + QUSB2PHY_PORT_POWERDOWN,
> + QUSB2PHY_INTR_CTRL,
> +};
> +
> +#define QUSB2_PHY_INIT_CFG(o, v) \
> + { \
> + .offset = o, .val = v, \
> + }
> +
> +#define QUSB2_PHY_INIT_CFG_L(o, v) \
> + { \
> + .offset = o, .val = v, .in_layout = 1, \
> + }
> +
> +static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = {
> + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
> + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
> + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81),
> + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17),
> +
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
> +
> + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
> +
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
> +};
> +
> +static const unsigned int sm6115_regs_layout[] = {
> + [QUSB2PHY_PLL_STATUS] = 0x38, [QUSB2PHY_PORT_TUNE1] = 0x80,
> + [QUSB2PHY_PORT_TUNE2] = 0x84, [QUSB2PHY_PORT_TUNE3] = 0x88,
> + [QUSB2PHY_PORT_TUNE4] = 0x8c, [QUSB2PHY_PORT_TUNE5] = 0x90,
> + [QUSB2PHY_PORT_TEST1] = 0xb8, [QUSB2PHY_PORT_TEST2] = 0x9c,
> + [QUSB2PHY_PORT_POWERDOWN] = 0xb4, [QUSB2PHY_INTR_CTRL] = 0xbc,
> +};
> +
> +static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = {
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_1, 0x40),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_2, 0x20),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_PWR_CTRL2, 0x21),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL1, 0x0),
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL2, 0x58),
> +
> + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x30),
> + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x29),
> + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0xca),
> + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x04),
> + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x03),
> +
> + QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0),
> +};
> +
> +static const unsigned int qusb2_v2_regs_layout[] = {
> + [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
> + [QUSB2PHY_PLL_STATUS] = 0x1a0,
> + [QUSB2PHY_PORT_TUNE1] = 0x240,
> + [QUSB2PHY_PORT_TUNE2] = 0x244,
> + [QUSB2PHY_PORT_TUNE3] = 0x248,
> + [QUSB2PHY_PORT_TUNE4] = 0x24c,
> + [QUSB2PHY_PORT_TUNE5] = 0x250,
> + [QUSB2PHY_PORT_TEST1] = 0x254,
> + [QUSB2PHY_PORT_TEST2] = 0x258,
> + [QUSB2PHY_PORT_POWERDOWN] = 0x210,
> + [QUSB2PHY_INTR_CTRL] = 0x230,
> +};
> +
> +static const struct qusb2_phy_cfg sm6115_phy_cfg = {
> + .tbl = sm6115_init_tbl,
> + .tbl_num = ARRAY_SIZE(sm6115_init_tbl),
> + .regs = sm6115_regs_layout,
> +
> + .has_pll_test = true,
> + .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
> + .mask_core_ready = PLL_LOCKED,
> + .autoresume_en = BIT(3),
> +};
> +
> +static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
> + .tbl = qusb2_v2_init_tbl,
> + .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl),
> + .regs = qusb2_v2_regs_layout,
> +
> + .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN |
> + POWER_DOWN),
> + .mask_core_ready = CORE_READY_STATUS,
> + .has_pll_override = true,
> + .autoresume_en = BIT(0),
> + .update_tune1_with_efuse = true,
> +};
> +
> +/**
> + * struct qusb2_phy - structure holding qusb2 phy attributes
> + *
> + * @phy: generic phy
> + * @base: iomapped memory space for qubs2 phy
> + *
> + * @cfg_ahb_clk: AHB2PHY interface clock
> + * @phy_rst: phy reset control
> + *
> + * @cfg: phy config data
> + * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme
> + */
> +struct qusb2_phy {
> + struct phy *phy;
> + void __iomem *base;
> +
> + struct clk cfg_ahb_clk;
> + struct reset_ctl phy_rst;
> +
> + const struct qusb2_phy_cfg *cfg;
> + bool has_se_clk_scheme;
> +};
> +
> +static inline void qusb2_phy_configure(void __iomem *base,
> + const unsigned int *regs,
> + const struct qusb2_phy_init_tbl tbl[],
> + int num)
> +{
> + int i;
> +
> + for (i = 0; i < num; i++) {
> + if (tbl[i].in_layout)
> + writel(tbl[i].val, base + regs[tbl[i].offset]);
> + else
> + writel(tbl[i].val, base + tbl[i].offset);
> + }
> +}
> +
> +static int qusb2phy_do_reset(struct qusb2_phy *qphy)
> +{
> + int ret;
> +
> + ret = reset_assert(&qphy->phy_rst);
> + if (ret)
> + return ret;
> +
> + udelay(500);
> +
> + ret = reset_deassert(&qphy->phy_rst);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int qusb2phy_power_on(struct phy *phy)
> +{
> + struct qusb2_phy *qphy = dev_get_priv(phy->dev);
> + const struct qusb2_phy_cfg *cfg = qphy->cfg;
> + int ret;
> + u32 val;
> +
> + ret = qusb2phy_do_reset(qphy);
> + if (ret)
> + return ret;
> +
> + /* Disable the PHY */
> + setbits_le32(qphy->base + cfg->regs[QUSB2PHY_PORT_POWERDOWN],
> + qphy->cfg->disable_ctrl);
> +
> + if (cfg->has_pll_test) {
> + /* save reset value to override reference clock scheme later */
> + val = readl(qphy->base + QUSB2PHY_PLL_TEST);
> + }
> +
> + qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl, cfg->tbl_num);
> +
> + /* Enable the PHY */
> + clrbits_le32(qphy->base + cfg->regs[QUSB2PHY_PORT_POWERDOWN],
> + POWER_DOWN);
> +
> + /* Required to get phy pll lock successfully */
> + udelay(150);
> +
> + if (cfg->has_pll_test) {
> + val |= CLK_REF_SEL;
> +
> + writel(val, qphy->base + QUSB2PHY_PLL_TEST);
> +
> + /* ensure above write is through */
> + readl(qphy->base + QUSB2PHY_PLL_TEST);
> + }
> +
> + /* Required to get phy pll lock successfully */
> + udelay(100);
> +
> + val = readb(qphy->base + cfg->regs[QUSB2PHY_PLL_STATUS]);
> + if (!(val & cfg->mask_core_ready)) {
> + pr_err("QUSB2PHY pll lock failed: status reg = %x\n", val);
> + ret = -EBUSY;
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int qusb2phy_power_off(struct phy *phy)
> +{
> + struct qusb2_phy *qphy = dev_get_priv(phy->dev);
> +
> + /* Disable the PHY */
> + setbits_le32(qphy->base + qphy->cfg->regs[QUSB2PHY_PORT_POWERDOWN],
> + qphy->cfg->disable_ctrl);
> +
> + reset_assert(&qphy->phy_rst);
> +
> + clk_disable(&qphy->cfg_ahb_clk);
> +
> + return 0;
> +}
> +
> +static int qusb2phy_clk_init(struct udevice *dev, struct qusb2_phy *qphy)
> +{
> + int ret;
> +
> + /* We ignore the ref clock as we currently lack a driver for rpmcc/rpmhcc where
> + * it usually comes from - we assume it's always on.
> + */
> + ret = clk_get_by_name(dev, "cfg_ahb", &qphy->cfg_ahb_clk);
> + if (ret == -ENOSYS || ret == -ENOENT)
> + return 0;
> + if (ret)
> + return ret;
> +
> + ret = clk_enable(&qphy->cfg_ahb_clk);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int qusb2phy_probe(struct udevice *dev)
> +{
> + struct qusb2_phy *qphy = dev_get_priv(dev);
> + int ret;
> +
> + qphy->base = (void __iomem *)dev_read_addr(dev);
> + if (IS_ERR(qphy->base))
> + return PTR_ERR(qphy->base);
> +
> + ret = qusb2phy_clk_init(dev, qphy);
> + if (ret) {
> + printf("%s: Couldn't get clocks: %d\n", __func__, ret);
> + return ret;
> + }
> +
> + ret = reset_get_by_index(dev, 0, &qphy->phy_rst);
> + if (ret) {
> + printf("%s: Couldn't get resets: %d\n", __func__, ret);
> + return ret;
> + }
> +
> + qphy->cfg = (const struct qusb2_phy_cfg *)dev_get_driver_data(dev);
> + if (!qphy->cfg) {
> + printf("%s: Couldn't get driver data\n", __func__);
> + return -EINVAL;
> + }
> +
> + debug("%s success qusb phy cfg %p\n", __func__, qphy->cfg);
> + return 0;
> +}
> +
> +static struct phy_ops qusb2phy_ops = {
> + .power_on = qusb2phy_power_on,
> + .power_off = qusb2phy_power_off,
> +};
> +
> +static const struct udevice_id qusb2phy_ids[] = {
> + { .compatible = "qcom,qusb2-phy" },
> + { .compatible = "qcom,qcm2290-qusb2-phy",
> + .data = (ulong)&sm6115_phy_cfg },
> + { .compatible = "qcom,sm6115-qusb2-phy",
> + .data = (ulong)&sm6115_phy_cfg },
> + { .compatible = "qcom,qusb2-v2-phy", .data = (ulong)&qusb2_v2_phy_cfg },
> + {}
> +};
> +
> +U_BOOT_DRIVER(qcom_qusb2_phy) = {
> + .name = "qcom-qusb2-phy",
> + .id = UCLASS_PHY,
> + .of_match = qusb2phy_ids,
> + .ops = &qusb2phy_ops,
> + .probe = qusb2phy_probe,
> + .priv_auto = sizeof(struct qusb2_phy),
> +};
>
> --
> 2.44.0
>
More information about the U-Boot
mailing list