[PATCH v2] mx6cuboxi: Do not print devicetree model

[Christian Gmeiner]

Hi Fabio

> The mx6cuboxi_defconfig target supports several board
> variants. All of these variants use the hummingboard devicetree in U-Boot.
> 
> Currently, the devicetree model as well as the board variant name
> are shown:
> 
> ...
> Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)
> Board: MX6 Cubox-i
> ...
> 
> Printing the devicetree model that is used internally by U-Boot
> may confuse users.
> 
> Unselect the CONFIG_DISPLAY_BOARDINFO option so that only the
> board name is printed in board_late_init() instead.
> 
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> ---

U-Boot 2024.04-rc5-00003-g5565c24adb (Apr 01 2024 - 12:05:25 +0200)

CPU:   Freescale i.MX6Q rev1.3 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 26C
Reset cause: POR
DRAM:  2 GiB
Core:  84 devices, 19 uclasses, devicetree: fit
WDT:   Started watchdog at 20bc000 with servicing every 1000ms (128s
timeout)
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default
environment

In:    serial
Out:   serial
Err:   serial
Board: MX6 Cubox-i
Net:   eth0: ethernet at 2188000


Tested-by: Christian Gmeiner <cgmeiner at igalia.com>

Thanks & Regards,
Christian