[PATCH] arm64: zynqmp: Describe DisplayPort connector for Kria

[Michal Simek]

On 3/21/24 16:54, Michal Simek wrote:
> From: Vishal Sagar <vishal.sagar at amd.com>
> 
> Add a device tree node to describe the DisplayPort connector, and
> connect it to the DPSUB output.
> 
> The patch was tested on kv260-revB/rev2 and also kr260-revB.
> 
> Signed-off-by: Vishal Sagar <vishal.sagar at amd.com>
> Signed-off-by: Michal Simek <michal.simek at amd.com>
> ---
> 
>   arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 20 ++++++++++++++++++++
>   arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 20 ++++++++++++++++++++
>   2 files changed, 40 insertions(+)
> 
> diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
> index 6c29f6574134..0a0cbd2b69ae 100644
> --- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
> +++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
> @@ -66,6 +66,18 @@
>   		#clock-cells = <0>;
>   		clock-frequency = <74250000>;
>   	};
> +
> +	dpcon {
> +		compatible = "dp-connector";
> +		label = "P11";
> +		type = "full-size";
> +
> +		port {
> +			dpcon_in: endpoint {
> +				remote-endpoint = <&dpsub_dp_out>;
> +			};
> +		};
> +	};
>   };
>   
>   &i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
> @@ -130,6 +142,14 @@
>   	phy-names = "dp-phy0";
>   	phys = <&psgtr 1 PHY_TYPE_DP 0 1>;
>   	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
> +
> +	ports {
> +		port at 5 {
> +			dpsub_dp_out: endpoint {
> +				remote-endpoint = <&dpcon_in>;
> +			};
> +		};
> +	};
>   };
>   
>   &zynqmp_dpdma {
> diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
> index a4b4465d2038..a449c1161b1e 100644
> --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
> +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
> @@ -63,6 +63,18 @@
>   		#clock-cells = <0>;
>   		clock-frequency = <27000000>;
>   	};
> +
> +	dpcon {
> +		compatible = "dp-connector";
> +		label = "P11";
> +		type = "full-size";
> +
> +		port {
> +			dpcon_in: endpoint {
> +				remote-endpoint = <&dpsub_dp_out>;
> +			};
> +		};
> +	};
>   };
>   
>   &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
> @@ -97,6 +109,14 @@
>   	phy-names = "dp-phy0", "dp-phy1";
>   	phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
>   	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
> +
> +	ports {
> +		port at 5 {
> +			dpsub_dp_out: endpoint {
> +				remote-endpoint = <&dpcon_in>;
> +			};
> +		};
> +	};
>   };
>   
>   &zynqmp_dpdma {

Applied.
M