[RFC PATCH v1 1/1] mmc: snps_sdhci: Add sdhci driver support for TH1520 SoC

[Heinrich Schuchardt]

Maxim Kiselev <bigunclemax at gmail.com> schrieb am Di., 2. Apr. 2024, 19:19:

> i, Heinrich!
>
> вт, 2 апр. 2024 г. в 17:47, Heinrich Schuchardt
> <heinrich.schuchardt at canonical.com>:
> >
> > On 30.03.24 18:59, Maksim Kiselev wrote:
> > > Add support for DesignWare SDHCI host controller on Alibaba TH1520 SoC
> > >
> > > Signed-off-by: Maksim Kiselev <bigunclemax at gmail.com>
> >
> > Thank you for driving the TH1520 support forward.
> >
> > Locally I updated the Lichee Pi4A device-tree based on the Linux
> > device-tree and built th1520_lpi4a_defconfig with
> >
> > CONFIG_CMD_MMC=y
> > CONFIG_MMC=y
> > CONFIG_MMC_SDHCI=y
> > CONFIG_MMC_SDHCI_SNPS=y
>
> You can also enable following options:
> CONFIG_MMC_IO_VOLTAGE=y
> CONFIG_MMC_UHS_SUPPORT=y
> CONFIG_MMC_HS400_ES_SUPPORT=y
> CONFIG_MMC_HS400_SUPPORT=y
>
> For HS400_ES mode also needs to add `mmc-hs400-enhanced-strobe`
> line to the emmc node in the Lichee's DT.
>

Could you, please, send a patch series with all these changes.

Best regards

Heinrich



> HS200/HS400/HS400_ES modes work fine with eMMC on my Lichee Pi4A board.
> MicroSD works fine at UHS SDR104 too.
>
> Bus Speed for both devices is 198MHz
>
> > I tested reading from eMMC and SD-card as well as writing to SD-card and
> > found no problems.
> >
> > Tested-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>
>
> Thanks for testing!
>