[PATCH v2 0/3] dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Drive-by fixes

[Laurent Pinchart]

Hello,

On Tue, Apr 02, 2024 at 09:52:06PM +0200, Stefan Wahren wrote:
> Am 02.04.24 um 10:58 schrieb Ivan T. Ivanov:
> > On 2024-03-28 01:37, Laurent Pinchart wrote:
> >> On Wed, Mar 27, 2024 at 07:49:38AM +0100, Stefan Wahren wrote:
> >>> Hi,
> >>>
> >>> [add Peter and Ivan]
> >>>
> >>> Am 26.03.24 um 20:58 schrieb Laurent Pinchart:
> >>> > Hello,
> >>> >
> >>> > This small series includes a few drive-by fixes for DT validation
> >>> > errors.
> >>> >
> >>> > The first patch has been posted previously in v1 ([1], and now addresses
> >>> > a small review comment. I think it's good to go.
> >>> >
> >>> > The next two patches address the same issue as "[PATCH 1/2] dt-bindings:
> >>> > arm: bcm: raspberrypi,bcm2835-firmware: Add missing properties" ([2]),
> >>> > but this time with a (hopefully) correct approach. Patch 2/3 starts by
> >>> > fixing the raspberrypi-bcm2835-firmware driver, removing the need for DT
> >>> > properties that are specified in bcm2835-rpi.dtsi but not documented in
> >>> > the corresponding bindings. Patch 3/3 can then drop those properties,
> >>> > getting rid of the warnings.
> >>>
> >>> since this series drops properties from the device tree, does anyone
> >>> have the chance to test it with a recent U-Boot?
> >>
> >> I don't have U-Boot running with my RPi, so I would appreciate if
> >> someone could help :-)
> >
> > Sorry for taking me so long to verify this.
> >
> > I think on RPi U-Boot side we are fine. API used when accessing Mbox
> > device do not follow DM model and do not use DMA, but just access
> > device directly using this nice macros phys_to_bus/bus_to_phys.
> >
> > I build new DTB files with this patch included and U-Boot build
> > from the latest sources. No obvious issues on RPi3 and RPi4.
> > Devices boot fine.

Thank you for testing Ivan.

> Thanks you, Laurent and Ivan
> 
> Reviewed-by: Stefan Wahren <wahrenst at gmx.net>

Stefan, I'm quite unfamiliar with the Raspberry Pi upstreaming process
(despite having sent patches for ages :-)), do I understand correctly
that this patch will go through your tree, or do I need to work with
someone else to get it merged upstream ?

-- 
Regards,

Laurent Pinchart