[PATCH v2] mmc: Add SPL_MMC_PWRSEQ to fix link issue when building SPL

Jaehoon Chung jh80.chung at samsung.com
Wed Apr 3 02:02:22 CEST 2024


On 1/28/24 02:12, Jonas Karlman wrote:
> With MMC_PWRSEQ enabled the following link issue may happen when
> building SPL and SPL_PWRSEQ is not enabled.
> 
>   aarch64-linux-gnu-ld.bfd: drivers/mmc/meson_gx_mmc.o: in function `meson_mmc_probe':
>   drivers/mmc/meson_gx_mmc.c:295: undefined reference to `pwrseq_set_power'
> 
> Fix this by adding a SPL_MMC_PWRSEQ Kconfig option used to enable mmc
> pwrseq support in SPL.
> 
> Also add depends on DM_GPIO to fix following link issue:
> 
>   aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.o: in function `mmc_pwrseq_set_power':
>   drivers/mmc/mmc-pwrseq.c:26: undefined reference to `gpio_request_by_name'
>   aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:29: undefined reference to `dm_gpio_set_value'
>   aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:31: undefined reference to `dm_gpio_set_value'
> 
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
> Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
> Acked-by: Ferass El Hafidi <vitali64pmemail at protonmail.com>

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Applied to u-boot-mmc/master, thanks! Sorry for late.

Best Regards,
Jaehoon Chung

> ---
> Changes in v2:
> - Fix Ths typo
> - Collect r-b and a-b tags
> 
> Link to v1: https://patchwork.ozlabs.org/patch/1839392/
> ---
>  drivers/mmc/Kconfig           | 12 ++++++++++--
>  drivers/mmc/Makefile          |  2 +-
>  drivers/mmc/meson_gx_mmc.c    |  2 +-
>  drivers/mmc/rockchip_dw_mmc.c |  2 +-
>  include/mmc.h                 |  4 ++--
>  5 files changed, 15 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index 17618c3bdcc1..a141007a576f 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -20,11 +20,19 @@ config MMC_WRITE
>  
>  config MMC_PWRSEQ
>  	bool "HW reset support for eMMC"
> -	depends on PWRSEQ
> +	depends on PWRSEQ && DM_GPIO
>  	help
> -	  Ths select Hardware reset support aka pwrseq-emmc for eMMC
> +	  This select Hardware reset support aka pwrseq-emmc for eMMC
>  	  devices.
>  
> +config SPL_MMC_PWRSEQ
> +	bool "HW reset support for eMMC in SPL"
> +	depends on SPL_PWRSEQ && SPL_DM_GPIO
> +	default y if MMC_PWRSEQ
> +	help
> +	  This select Hardware reset support aka pwrseq-emmc for eMMC
> +	  devices in SPL.
> +
>  config MMC_BROKEN_CD
>  	bool "Poll for broken card detection case"
>  	help
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index e9cf1fcc6400..2b94cc2f1c34 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -11,7 +11,7 @@ obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += mmc_bootdev.o
>  endif
>  
>  obj-$(CONFIG_$(SPL_TPL_)MMC_WRITE) += mmc_write.o
> -obj-$(CONFIG_MMC_PWRSEQ) += mmc-pwrseq.o
> +obj-$(CONFIG_$(SPL_)MMC_PWRSEQ) += mmc-pwrseq.o
>  obj-$(CONFIG_MMC_SDHCI_ADMA_HELPERS) += sdhci-adma.o
>  
>  ifndef CONFIG_$(SPL_)BLK
> diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
> index fcf4f03d1e24..0825c0a2a838 100644
> --- a/drivers/mmc/meson_gx_mmc.c
> +++ b/drivers/mmc/meson_gx_mmc.c
> @@ -288,7 +288,7 @@ static int meson_mmc_probe(struct udevice *dev)
>  
>  	mmc_set_clock(mmc, cfg->f_min, MMC_CLK_ENABLE);
>  
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
>  	/* Enable power if needed */
>  	ret = mmc_pwrseq_get_power(dev, cfg);
>  	if (!ret) {
> diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c
> index 72c820ee6330..ad4529d6afa8 100644
> --- a/drivers/mmc/rockchip_dw_mmc.c
> +++ b/drivers/mmc/rockchip_dw_mmc.c
> @@ -145,7 +145,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
>  
>  	host->fifo_mode = priv->fifo_mode;
>  
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
>  	/* Enable power if needed */
>  	ret = mmc_pwrseq_get_power(dev, &plat->cfg);
>  	if (!ret) {
> diff --git a/include/mmc.h b/include/mmc.h
> index 1022db3ffa7c..9aef31ea5deb 100644
> --- a/include/mmc.h
> +++ b/include/mmc.h
> @@ -590,7 +590,7 @@ struct mmc_config {
>  	uint f_max;
>  	uint b_max;
>  	unsigned char part_type;
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
>  	struct udevice *pwr_dev;
>  #endif
>  };
> @@ -808,7 +808,7 @@ int mmc_deinit(struct mmc *mmc);
>   */
>  int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg);
>  
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
>  /**
>   * mmc_pwrseq_get_power() - get a power device from device tree
>   *



More information about the U-Boot mailing list