[PATCH v2 2/3] mmc: dw_mmc: Don't return error if data busy timeout

[Jaehoon Chung]

Hi,

On 2/1/24 23:05, Yang Xiwen via B4 Relay wrote:
> From: Yang Xiwen <forbidden405 at outlook.com>
> 
> As described in [1], some poor hardware or cards would fail to release
> the bus and keep driving data lines low. Ignore it and send the next cmd
> directly seems okay for most cases.
This patch seems to be same with previous patch, right?

Best Regards,
Jaehoon Chung

> 
> [1]: https://patchwork.kernel.org/project/linux-mmc/patch/1424458179-5456-1-git-send-email-dianders@chromium.org/
> 
> Signed-off-by: Yang Xiwen <forbidden405 at outlook.com>
> ---
>  drivers/mmc/dw_mmc.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
> index 400066fa99..e103664145 100644
> --- a/drivers/mmc/dw_mmc.c
> +++ b/drivers/mmc/dw_mmc.c
> @@ -262,8 +262,8 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
>  
>  	while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
>  		if (get_timer(start) > timeout) {
> -			debug("%s: Timeout on data busy\n", __func__);
> -			return -ETIMEDOUT;
> +			debug("%s: Timeout on data busy, continue anyway\n", __func__);
> +			break;
>  		}
>  	}
>