[PATCH] mmc: arm_pl180: Limit data transfer to U16_MAX

Jaehoon Chung jh80.chung at samsung.com
Wed Apr 3 03:24:06 CEST 2024


Hi,

On 2/28/24 05:18, cmax at mailbox.org wrote:
> From: max <cmax at mailbox.org>
> 
> Currently fetching files bigger that cause a data transfer greater than
> U16_MAX fails.
> 
> The reason is that the specification defines the datalength register
> as a 16 bit wide register, but in u-boot it is used as if it is an
> 32 bit register. Therefore values greater than U16_MAX cause an
> infinite loop inside u-boot. U-boot expects to get more data from
> interface/hardware then it will ever get and therefore inifintely waits
> for more data that will never come.
> 
> Signed-off-by: max <cmax at mailbox.org>

Could you add your full name as Signed-off's tag?

> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Jaehoon Chung <jh80.chung at samsung.com>
> ---
>  drivers/mmc/arm_pl180_mmci.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c
> index 5cf5502ed5..af2f9a5a84 100644
> --- a/drivers/mmc/arm_pl180_mmci.c
> +++ b/drivers/mmc/arm_pl180_mmci.c
> @@ -231,6 +231,7 @@ static int do_data_transfer(struct mmc *dev,
>  	u32 blksz = 0;
>  	u32 data_ctrl = 0;
>  	u32 data_len = (u32) (data->blocks * data->blocksize);
> +	assert(data_len < U16_MAX); // should be ensured by arm_pl180_get_b_max

Add the comment at above with  "/* ... */"

/* Should be ensured by arm_pl180_get_b_max */
assert(data_len < U16_MAX);

Best Regards,
Jaehoon Chung

>  
>  	if (!host->version2) {
>  		blksz = (ffs(data->blocksize) - 1);
> @@ -358,6 +359,14 @@ static int  host_set_ios(struct mmc *dev)
>  	return 0;
>  }
>  
> +static int arm_pl180_get_b_max(struct udevice *dev, void *dst, lbaint_t blkcnt)
> +{
> +	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> +	struct mmc *mmc = upriv->mmc;
> +
> +	return U16_MAX / mmc->read_bl_len;
> +}
> +
>  #ifndef CONFIG_DM_MMC
>  /* MMC uses open drain drivers in the enumeration phase */
>  static int mmc_host_reset(struct mmc *dev)
> @@ -373,6 +382,7 @@ static const struct mmc_ops arm_pl180_mmci_ops = {
>  	.send_cmd = host_request,
>  	.set_ios = host_set_ios,
>  	.init = mmc_host_reset,
> +	.get_b_max = arm_pl180_get_b_max,
>  };
>  
>  /*
> @@ -531,6 +541,7 @@ static const struct dm_mmc_ops arm_pl180_dm_mmc_ops = {
>  	.send_cmd = dm_host_request,
>  	.set_ios = dm_host_set_ios,
>  	.get_cd = dm_mmc_getcd,
> +	.get_b_max = arm_pl180_get_b_max,
>  };
>  
>  static int arm_pl180_mmc_of_to_plat(struct udevice *dev)



More information about the U-Boot mailing list