[PATCH 2/3] arm64: imx: imx8mm-beacon: Migrate to OF_UPSTREAM
Adam Ford
aford173 at gmail.com
Thu Apr 4 04:59:07 CEST 2024
The imx8mm-beacon boards can migrate to OF_UPSTREAM which also
allows for the removal the device tree files.
Signed-off-by: Adam Ford <aford173 at gmail.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 04ffa1f165..443d651827 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1091,7 +1091,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
imx8mn-evk.dtb \
imx8mn-var-som-symphony.dtb \
imx8mq-evk.dtb \
- imx8mm-beacon-kit.dtb \
imx8mn-beacon-kit.dtb \
imx8mq-mnt-reform2.dtb \
imx8mq-phanbell.dtb \
diff --git a/arch/arm/dts/imx8mm-beacon-kit.dts b/arch/arm/dts/imx8mm-beacon-kit.dts
deleted file mode 100644
index 74a7b0cc10..0000000000
--- a/arch/arm/dts/imx8mm-beacon-kit.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2020 Compass Electronics Group, LLC
- */
-
-/dts-v1/;
-
-#include "imx8mm.dtsi"
-#include "imx8mm-beacon-som.dtsi"
-#include "imx8mm-beacon-baseboard.dtsi"
-
-/ {
- model = "Beacon EmbeddedWorks i.MX8M Mini Development Kit";
- compatible = "beacon,imx8mm-beacon-kit", "fsl,imx8mm";
-
- chosen {
- stdout-path = &uart2;
- };
-};
diff --git a/arch/arm/dts/imx8mm-beacon-som.dtsi b/arch/arm/dts/imx8mm-beacon-som.dtsi
deleted file mode 100644
index cf07987ccc..0000000000
--- a/arch/arm/dts/imx8mm-beacon-som.dtsi
+++ /dev/null
@@ -1,461 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2020 Compass Electronics Group, LLC
- */
-
-/ {
- aliases {
- rtc0 = &rtc;
- rtc1 = &snvs_rtc;
- };
-
- usdhc1_pwrseq: usdhc1_pwrseq {
- compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1_gpio>;
- reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
- clocks = <&osc_32k>;
- clock-names = "ext_clock";
- post-power-on-delay-ms = <80>;
- };
-
- memory at 40000000 {
- device_type = "memory";
- reg = <0x0 0x40000000 0 0x80000000>;
- };
-};
-
-&A53_0 {
- cpu-supply = <&buck2_reg>;
-};
-
-&A53_1 {
- cpu-supply = <&buck2_reg>;
-};
-
-&A53_2 {
- cpu-supply = <&buck2_reg>;
-};
-
-&A53_3 {
- cpu-supply = <&buck2_reg>;
-};
-
-&ddrc {
- operating-points-v2 = <&ddrc_opp_table>;
-
- ddrc_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-25M {
- opp-hz = /bits/ 64 <25000000>;
- };
-
- opp-100M {
- opp-hz = /bits/ 64 <100000000>;
- };
-
- opp-750M {
- opp-hz = /bits/ 64 <750000000>;
- };
- };
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy at 0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
- };
-};
-
-&flexspi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexspi>;
- status = "okay";
-
- flash at 0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <80000000>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>;
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- pmic at 4b {
- compatible = "rohm,bd71847";
- reg = <0x4b>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
- interrupt-parent = <&gpio1>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
- rohm,reset-snvs-powered;
-
- #clock-cells = <0>;
- clocks = <&osc_32k 0>;
- clock-output-names = "clk-32k-out";
-
- regulators {
- buck1_reg: BUCK1 {
- regulator-name = "buck1";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <1250>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "buck2";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <1250>;
- rohm,dvs-run-voltage = <1000000>;
- rohm,dvs-idle-voltage = <900000>;
- };
-
- buck3_reg: BUCK3 {
- // BUCK5 in datasheet
- regulator-name = "buck3";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1350000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck4_reg: BUCK4 {
- // BUCK6 in datasheet
- regulator-name = "buck4";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck5_reg: BUCK5 {
- // BUCK7 in datasheet
- regulator-name = "buck5";
- regulator-min-microvolt = <1605000>;
- regulator-max-microvolt = <1995000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck6_reg: BUCK6 {
- // BUCK8 in datasheet
- regulator-name = "buck6";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1_reg: LDO1 {
- regulator-name = "ldo1";
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "ldo2";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <900000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "ldo3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "ldo4";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "ldo6";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
-
-&i2c3 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- status = "okay";
-
- eeprom at 50 {
- compatible = "microchip,24c64", "atmel,24c64";
- pagesize = <32>;
- read-only; /* Manufacturing EEPROM programmed at factory */
- reg = <0x50>;
- };
-
- rtc: rtc at 51 {
- compatible = "nxp,pcf85263";
- reg = <0x51>;
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- assigned-clocks = <&clk IMX8MM_CLK_UART1>;
- assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
- uart-has-rtscts;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
- device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
- clocks = <&osc_32k>;
- max-speed = <4000000>;
- clock-names = "extclk";
- };
-};
-
-&usdhc1 {
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc1>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
- bus-width = <4>;
- non-removable;
- cap-power-off-card;
- keep-power-in-suspend;
- mmc-pwrseq = <&usdhc1_pwrseq>;
- status = "okay";
-
- brcmf: bcrmf at 1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wlan>;
- interrupt-parent = <&gpio2>;
- interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- };
-};
-
-&usdhc3 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3>;
- pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
- MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
- MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
- MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
- MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
- MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
- MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
- MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
- MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
- MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
- MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
- MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
- MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
- MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
- MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
- MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
- MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
- >;
- };
-
- pinctrl_flexspi: flexspigrp {
- fsl,pins = <
- MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2
- MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
- MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
- MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
- MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
- MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
- >;
- };
-
- pinctrl_pmic: pmicirqgrp {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
- MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
- MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140
- MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140
- MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19
- MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19
- MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19
- MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141
- >;
- };
-
- pinctrl_usdhc1_gpio: usdhc1gpiogrp {
- fsl,pins = <
- MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
- MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
- MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
- MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
- MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
- MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
- >;
- };
-
- pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
- fsl,pins = <
- MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
- MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
- MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
- MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
- MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
- MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
- >;
- };
-
- pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
- fsl,pins = <
- MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
- MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
- MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
- MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
- MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
- MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
- MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
- MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
- MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
- MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
- MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
- MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
- MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
- MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
- MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
- MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
- >;
- };
-
- pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
- fsl,pins = <
- MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
- MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
- MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
- MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
- MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
- MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
- MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
- MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
- MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
- MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
- MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
- fsl,pins = <
- MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
- MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
- MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
- MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
- MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
- MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
- MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
- MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
- MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
- MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
- MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
- >;
- };
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166
- >;
- };
-
- pinctrl_wlan: wlangrp {
- fsl,pins = <
- MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x111
- >;
- };
-};
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index dd6ced5b28..3592f6736b 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -272,6 +272,7 @@ config TARGET_IMX8MM_BEACON
select FSL_CAAM
select ARCH_MISC_INIT
select SPL_CRYPTO if SPL
+ imply OF_UPSTREAM
config TARGET_IMX8MN_BEACON
bool "imx8mn Beacon Embedded devkit"
diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig
index b926798ae0..0b601bb862 100644
--- a/configs/imx8mm_beacon_defconfig
+++ b/configs/imx8mm_beacon_defconfig
@@ -10,7 +10,7 @@ CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFDE00
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mm-beacon-kit"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-beacon-kit"
CONFIG_SPL_TEXT_BASE=0x7E1000
CONFIG_TARGET_IMX8MM_BEACON=y
CONFIG_SYS_MONITOR_LEN=524288
diff --git a/configs/imx8mm_beacon_fspi_defconfig b/configs/imx8mm_beacon_fspi_defconfig
index 341ea47d98..eaf8dce3b5 100644
--- a/configs/imx8mm_beacon_fspi_defconfig
+++ b/configs/imx8mm_beacon_fspi_defconfig
@@ -11,7 +11,7 @@ CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFDE00
CONFIG_IMX_CONFIG="board/freescale/imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg"
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mm-beacon-kit"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-beacon-kit"
CONFIG_SPL_TEXT_BASE=0x7E2000
CONFIG_TARGET_IMX8MM_BEACON=y
CONFIG_SYS_MONITOR_LEN=524288
--
2.43.0
More information about the U-Boot
mailing list