[PATCH 1/3] arm64: imx: imx8mp-beacon: Migrate to OF_UPSTREAM

Sumit Garg sumit.garg at linaro.org
Thu Apr 4 06:08:24 CEST 2024


On Thu, 4 Apr 2024 at 08:29, Adam Ford <aford173 at gmail.com> wrote:
>
> The imx8mp-beacon boards can migrate to OF_UPSTREAM which also
> allows for the removal the device tree files.
>
> Signed-off-by: Adam Ford <aford173 at gmail.com>
>

For the series:

Reviewed-by: Sumit Garg <sumit.garg at linaro.org>

-Sumit

> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index d85a33055c..04ffa1f165 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -1095,7 +1095,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
>         imx8mn-beacon-kit.dtb \
>         imx8mq-mnt-reform2.dtb \
>         imx8mq-phanbell.dtb \
> -       imx8mp-beacon-kit.dtb \
>         imx8mp-data-modul-edm-sbc.dtb \
>         imx8mp-dhcom-som-overlay-rev100.dtbo \
>         imx8mp-dhcom-som-overlay-eth1xfast.dtbo \
> diff --git a/arch/arm/dts/imx8mp-beacon-kit.dts b/arch/arm/dts/imx8mp-beacon-kit.dts
> deleted file mode 100644
> index a08057410b..0000000000
> --- a/arch/arm/dts/imx8mp-beacon-kit.dts
> +++ /dev/null
> @@ -1,783 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright 2023 Logic PD, Inc dba Beacon EmbeddedWorks
> - */
> -
> -/dts-v1/;
> -
> -#include <dt-bindings/usb/pd.h>
> -#include <dt-bindings/phy/phy-imx8-pcie.h>
> -#include "imx8mp.dtsi"
> -#include "imx8mp-beacon-som.dtsi"
> -
> -/ {
> -       model = "Beacon EmbeddedWorks i.MX8MPlus Development kit";
> -       compatible = "beacon,imx8mp-beacon-kit", "fsl,imx8mp";
> -
> -       aliases {
> -               ethernet0 = &eqos;
> -               ethernet1 = &fec;
> -       };
> -
> -       chosen {
> -               stdout-path = &uart2;
> -       };
> -
> -       clk_xtal25: clock-xtal25 {
> -               compatible = "fixed-clock";
> -               #clock-cells = <0>;
> -               clock-frequency = <25000000>;
> -       };
> -
> -       connector {
> -               compatible = "usb-c-connector";
> -               label = "USB-C";
> -               data-role = "dual";
> -
> -               ports {
> -                       #address-cells = <1>;
> -                       #size-cells = <0>;
> -
> -                       port at 0 {
> -                               reg = <0>;
> -
> -                               hs_ep: endpoint {
> -                                       remote-endpoint = <&usb3_hs_ep>;
> -                               };
> -                       };
> -                       port at 1 {
> -                               reg = <1>;
> -
> -                               ss_ep: endpoint {
> -                                       remote-endpoint = <&hd3ss3220_in_ep>;
> -                               };
> -                       };
> -               };
> -       };
> -
> -       dmic_codec: dmic-codec {
> -               compatible = "dmic-codec";
> -               num-channels = <1>;
> -               #sound-dai-cells = <0>;
> -       };
> -
> -       gpio-keys {
> -               compatible = "gpio-keys";
> -               autorepeat;
> -
> -               button-0 {
> -                       label = "btn0";
> -                       linux,code = <BTN_0>;
> -                       gpios = <&pca6416_1 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> -                       wakeup-source;
> -               };
> -
> -               button-1 {
> -                       label = "btn1";
> -                       linux,code = <BTN_1>;
> -                       gpios = <&pca6416_1 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> -                       wakeup-source;
> -               };
> -
> -               button-2 {
> -                       label = "btn2";
> -                       linux,code = <BTN_2>;
> -                       gpios = <&pca6416_1 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> -                       wakeup-source;
> -               };
> -
> -               button-3 {
> -                       label = "btn3";
> -                       linux,code = <BTN_3>;
> -                       gpios = <&pca6416_1 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> -                       wakeup-source;
> -               };
> -       };
> -
> -       bridge-connector {
> -               compatible = "hdmi-connector";
> -               type = "a";
> -
> -               port {
> -                       hdmi_con: endpoint {
> -                               remote-endpoint = <&adv7535_out>;
> -                       };
> -               };
> -       };
> -
> -       leds {
> -               compatible = "gpio-leds";
> -               pinctrl-names = "default";
> -               pinctrl-0 = <&pinctrl_led3>;
> -
> -               led-0 {
> -                       label = "gen_led0";
> -                       gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
> -                       default-state = "off";
> -               };
> -
> -               led-1 {
> -                       label = "gen_led1";
> -                       gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
> -                       default-state = "off";
> -               };
> -
> -               led-2 {
> -                       label = "gen_led2";
> -                       gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
> -                       default-state = "off";
> -               };
> -
> -               led-3 {
> -                       label = "heartbeat";
> -                       gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
> -                       linux,default-trigger = "heartbeat";
> -               };
> -       };
> -
> -       reg_audio: regulator-wm8962 {
> -               compatible = "regulator-fixed";
> -               regulator-name = "3v3_aud";
> -               regulator-min-microvolt = <3300000>;
> -               regulator-max-microvolt = <3300000>;
> -               gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
> -               enable-active-high;
> -       };
> -
> -       reg_usdhc2_vmmc: regulator-usdhc2 {
> -               compatible = "regulator-fixed";
> -               regulator-name = "VSD_3V3";
> -               regulator-min-microvolt = <3300000>;
> -               regulator-max-microvolt = <3300000>;
> -               gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> -               enable-active-high;
> -               startup-delay-us = <100>;
> -               off-on-delay-us = <20000>;
> -       };
> -
> -       reg_usb1_host_vbus: regulator-usb1-vbus {
> -               compatible = "regulator-fixed";
> -               regulator-name = "usb1_host_vbus";
> -               regulator-max-microvolt = <5000000>;
> -               regulator-min-microvolt = <5000000>;
> -               gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
> -               enable-active-high;
> -       };
> -
> -       sound-adv7535 {
> -               compatible = "simple-audio-card";
> -               simple-audio-card,name = "sound-adv7535";
> -               simple-audio-card,format = "i2s";
> -
> -               simple-audio-card,cpu {
> -                       sound-dai = <&sai5>;
> -                       system-clock-direction-out;
> -               };
> -
> -               simple-audio-card,codec {
> -                       sound-dai = <&adv_bridge>;
> -               };
> -       };
> -
> -       sound-dmic {
> -               compatible = "simple-audio-card";
> -               simple-audio-card,name = "sound-pdm";
> -               simple-audio-card,format = "i2s";
> -               simple-audio-card,bitclock-master = <&dailink_master>;
> -               simple-audio-card,frame-master = <&dailink_master>;
> -
> -               dailink_master: simple-audio-card,cpu {
> -                       sound-dai = <&micfil>;
> -               };
> -
> -               simple-audio-card,codec {
> -                       sound-dai = <&dmic_codec>;
> -               };
> -       };
> -
> -       sound-wm8962 {
> -               compatible = "simple-audio-card";
> -               simple-audio-card,name = "wm8962";
> -               simple-audio-card,format = "i2s";
> -               simple-audio-card,widgets = "Headphone", "Headphones",
> -                                           "Microphone", "Headset Mic",
> -                                           "Speaker", "Speaker";
> -               simple-audio-card,routing = "Headphones", "HPOUTL",
> -                                           "Headphones", "HPOUTR",
> -                                           "Speaker", "SPKOUTL",
> -                                           "Speaker", "SPKOUTR",
> -                                           "Headset Mic", "MICBIAS",
> -                                           "IN3R", "Headset Mic";
> -
> -               simple-audio-card,cpu {
> -                       sound-dai = <&sai3>;
> -               };
> -
> -               simple-audio-card,codec {
> -                       sound-dai = <&wm8962>;
> -                       clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
> -                       frame-master;
> -                       bitclock-master;
> -               };
> -       };
> -};
> -
> -&audio_blk_ctrl {
> -       assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>, <&clk IMX8MP_AUDIO_PLL2>;
> -       assigned-clock-rates = <393216000>, <135475200>;
> -};
> -
> -&ecspi2 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_ecspi2>;
> -       cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> -       status = "okay";
> -
> -       tpm: tpm at 0 {
> -               compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
> -               reg = <0>;
> -               pinctrl-names = "default";
> -               pinctrl-0 = <&pinctrl_tpm>;
> -               reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
> -               spi-max-frequency = <18500000>;
> -       };
> -};
> -
> -&fec {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_fec>;
> -       phy-mode = "rgmii-id";
> -       phy-handle = <&ethphy1>;
> -       fsl,magic-packet;
> -       status = "okay";
> -
> -       mdio {
> -               #address-cells = <1>;
> -               #size-cells = <0>;
> -
> -               ethphy1: ethernet-phy at 3 {
> -                       compatible = "ethernet-phy-id0022.1640",
> -                                    "ethernet-phy-ieee802.3-c22";
> -                       reg = <3>;
> -                       reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
> -                       reset-assert-us = <10000>;
> -                       reset-deassert-us = <150000>;
> -                       interrupt-parent = <&gpio4>;
> -                       interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> -               };
> -       };
> -};
> -
> -&flexcan1 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_flexcan1>;
> -       status = "okay";
> -};
> -
> -&gpio2 {
> -       usb-mux-hog {
> -               gpio-hog;
> -               gpios = <20 0>;
> -               output-low;
> -               line-name = "USB-C Mux En";
> -       };
> -};
> -
> -&i2c2 {
> -       clock-frequency = <384000>;
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_i2c2>;
> -       status = "okay";
> -
> -       pca6416_3: gpio at 20 {
> -               compatible = "nxp,pcal6416";
> -               reg = <0x20>;
> -               gpio-controller;
> -               #gpio-cells = <2>;
> -               interrupt-parent = <&gpio4>;
> -               interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
> -               interrupt-controller;
> -               #interrupt-cells = <2>;
> -       };
> -
> -       adv_bridge: hdmi at 3d {
> -               compatible = "adi,adv7535";
> -               reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
> -               reg-names = "main", "cec", "edid", "packet";
> -               adi,dsi-lanes = <4>;
> -               #sound-dai-cells = <0>;
> -
> -               ports {
> -                       #address-cells = <1>;
> -                       #size-cells = <0>;
> -
> -                       port at 0 {
> -                               reg = <0>;
> -
> -                               adv7535_in: endpoint {
> -                                       remote-endpoint = <&dsi_out>;
> -                               };
> -                       };
> -
> -                       port at 1 {
> -                               reg = <1>;
> -
> -                               adv7535_out: endpoint {
> -                                       remote-endpoint = <&hdmi_con>;
> -                               };
> -                       };
> -               };
> -       };
> -
> -       pcieclk: clock-generator at 68 {
> -               compatible = "renesas,9fgv0241";
> -               reg = <0x68>;
> -               clocks = <&clk_xtal25>;
> -               #clock-cells = <1>;
> -       };
> -};
> -
> -&i2c3 {
> -       /* Connected to USB Hub */
> -       usb-typec at 52 {
> -               compatible = "nxp,ptn5110";
> -               reg = <0x52>;
> -               pinctrl-names = "default";
> -               pinctrl-0 = <&pinctrl_typec>;
> -               interrupt-parent = <&gpio4>;
> -               interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
> -
> -               connector {
> -                       compatible = "usb-c-connector";
> -                       label = "USB-C";
> -                       power-role = "source";
> -                       data-role = "host";
> -                       source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> -               };
> -       };
> -};
> -
> -&i2c4 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_i2c4>;
> -       clock-frequency = <384000>;
> -       status = "okay";
> -
> -       wm8962: audio-codec at 1a {
> -               compatible = "wlf,wm8962";
> -               reg = <0x1a>;
> -               pinctrl-names = "default";
> -               pinctrl-0 = <&pinctrl_wm8962>;
> -               clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
> -               assigned-clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
> -               assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
> -               assigned-clock-rates = <22576000>;
> -               DCVDD-supply = <&reg_audio>;
> -               DBVDD-supply = <&reg_audio>;
> -               AVDD-supply = <&reg_audio>;
> -               CPVDD-supply = <&reg_audio>;
> -               MICVDD-supply = <&reg_audio>;
> -               PLLVDD-supply = <&reg_audio>;
> -               SPKVDD1-supply = <&reg_audio>;
> -               SPKVDD2-supply = <&reg_audio>;
> -               gpio-cfg = <
> -                       0x0000 /* 0:Default */
> -                       0x0000 /* 1:Default */
> -                       0x0000 /* 2:FN_DMICCLK */
> -                       0x0000 /* 3:Default */
> -                       0x0000 /* 4:FN_DMICCDAT */
> -                       0x0000 /* 5:Default */
> -               >;
> -               #sound-dai-cells = <0>;
> -       };
> -
> -       pca6416: gpio at 20 {
> -               compatible = "nxp,pcal6416";
> -               reg = <0x20>;
> -               pinctrl-names = "default";
> -               pinctrl-0 = <&pinctrl_pcal6414>;
> -               gpio-controller;
> -               #gpio-cells = <2>;
> -               interrupt-parent = <&gpio4>;
> -               interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
> -               interrupt-controller;
> -               #interrupt-cells = <2>;
> -       };
> -
> -       pca6416_1: gpio at 21 {
> -               compatible = "nxp,pcal6416";
> -               reg = <0x21>;
> -               gpio-controller;
> -               #gpio-cells = <2>;
> -               interrupt-parent = <&gpio4>;
> -               interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
> -               interrupt-controller;
> -               #interrupt-cells = <2>;
> -
> -               usb-hub-hog {
> -                       gpio-hog;
> -                       gpios = <7 0>;
> -                       output-low;
> -                       line-name = "USB Hub Enable";
> -               };
> -       };
> -
> -       usb-typec at 47 {
> -               compatible = "ti,hd3ss3220";
> -               reg = <0x47>;
> -               pinctrl-names = "default";
> -               pinctrl-0 = <&pinctrl_hd3ss3220>;
> -               interrupt-parent = <&gpio4>;
> -               interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> -
> -               ports {
> -                       #address-cells = <1>;
> -                       #size-cells = <0>;
> -
> -                       port at 0 {
> -                               reg = <0>;
> -
> -                               hd3ss3220_in_ep: endpoint {
> -                                       remote-endpoint = <&ss_ep>;
> -                               };
> -                       };
> -
> -                       port at 1 {
> -                               reg = <1>;
> -
> -                               hd3ss3220_out_ep: endpoint {
> -                                       remote-endpoint = <&usb3_role_switch>;
> -                               };
> -                       };
> -               };
> -       };
> -};
> -
> -&lcdif1 {
> -       status = "okay";
> -};
> -
> -&micfil {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_pdm>;
> -       assigned-clocks = <&clk IMX8MP_CLK_PDM>;
> -       assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
> -       assigned-clock-rates = <49152000>;
> -       status = "okay";
> -};
> -
> -&mipi_dsi {
> -       samsung,esc-clock-frequency = <10000000>;
> -       status = "okay";
> -
> -       ports {
> -               port at 1 {
> -                       reg = <1>;
> -
> -                       dsi_out: endpoint {
> -                               remote-endpoint = <&adv7535_in>;
> -                       };
> -               };
> -       };
> -};
> -
> -&pcie {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_pcie>;
> -       reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
> -       status = "okay";
> -};
> -
> -&pcie_phy {
> -       fsl,clkreq-unsupported;
> -       fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> -       clocks = <&pcieclk 1>;
> -       clock-names = "ref";
> -       status = "okay";
> -};
> -
> -&sai3 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_sai3>;
> -       assigned-clocks = <&clk IMX8MP_CLK_SAI3>,
> -                         <&clk IMX8MP_AUDIO_PLL2> ;
> -       assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
> -       assigned-clock-rates = <12288000>, <361267200>;
> -       fsl,sai-mclk-direction-output;
> -       status = "okay";
> -};
> -
> -&sai5 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_sai5>;
> -       assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
> -       assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
> -       assigned-clock-rates = <12288000>;
> -       fsl,sai-mclk-direction-output;
> -       status = "okay";
> -};
> -
> -&snvs_pwrkey {
> -       status = "okay";
> -};
> -
> -&uart2 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_uart2>;
> -       status = "okay";
> -};
> -
> -&uart3 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_uart3>;
> -       assigned-clocks = <&clk IMX8MP_CLK_UART3>;
> -       assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
> -       uart-has-rtscts;
> -       status = "okay";
> -};
> -
> -&usb3_0 {
> -       status = "okay";
> -};
> -
> -&usb_dwc3_0 {
> -       dr_mode = "otg";
> -       hnp-disable;
> -       srp-disable;
> -       adp-disable;
> -       usb-role-switch;
> -       status = "okay";
> -
> -       ports {
> -               #address-cells = <1>;
> -               #size-cells = <0>;
> -
> -               port at 0 {
> -                       reg = <0>;
> -                       usb3_hs_ep: endpoint {
> -                               remote-endpoint = <&hs_ep>;
> -                       };
> -               };
> -               port at 1 {
> -                       reg = <1>;
> -                       usb3_role_switch: endpoint {
> -                               remote-endpoint = <&hd3ss3220_out_ep>;
> -                       };
> -               };
> -       };
> -};
> -
> -&usb3_phy0 {
> -       vbus-supply = <&reg_usb1_host_vbus>;
> -       status = "okay";
> -};
> -
> -&usb3_1 {
> -       status = "okay";
> -};
> -
> -&usb_dwc3_1 {
> -       dr_mode = "host";
> -       status = "okay";
> -};
> -
> -&usb3_phy1 {
> -       status = "okay";
> -};
> -
> -&usdhc2 {
> -       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> -       pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> -       pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> -       pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> -       cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> -       vmmc-supply = <&reg_usdhc2_vmmc>;
> -       bus-width = <4>;
> -       status = "okay";
> -};
> -
> -&iomuxc {
> -       pinctrl_ecspi2: ecspi2grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK   0x82
> -                       MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI   0x82
> -                       MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO   0x82
> -                       MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13     0x40000
> -               >;
> -       };
> -
> -       pinctrl_fec: fecgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC       0x2
> -                       MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO      0x2
> -                       MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
> -                       MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
> -                       MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
> -                       MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
> -                       MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC  0x90
> -                       MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL      0x90
> -                       MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16
> -                       MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16
> -                       MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16
> -                       MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16
> -                       MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL      0x16
> -                       MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16
> -                       MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02      0x140
> -                       MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18      0x10
> -               >;
> -       };
> -
> -       pinctrl_flexcan1: flexcan1grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SPDIF_RX__CAN1_RX  0x154
> -                       MX8MP_IOMUXC_SPDIF_TX__CAN1_TX  0x154
> -               >;
> -       };
> -
> -       pinctrl_hd3ss3220: hd3ss3220grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19      0x140
> -               >;
> -       };
> -
> -       pinctrl_i2c2: i2c2grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
> -                       MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
> -               >;
> -       };
> -
> -       pinctrl_i2c4: i2c4grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c2
> -                       MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c2
> -               >;
> -       };
> -
> -       pinctrl_led3: led3grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28      0x41
> -               >;
> -       };
> -
> -       pinctrl_pcal6414: pcal6414-gpiogrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27      0x10
> -               >;
> -       };
> -
> -       pinctrl_pcie: pciegrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05     0x10 /* PCIe_nDIS */
> -                       MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x10 /* PCIe_nRST */
> -               >;
> -       };
> -
> -       pinctrl_pdm: pdmgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK         0xd6
> -                       MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00       0xd6
> -               >;
> -       };
> -
> -       pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19    0x40
> -               >;
> -       };
> -
> -       pinctrl_sai3: sai3grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC   0xd6
> -                       MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK    0xd6
> -                       MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00  0xd6
> -                       MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00  0xd6
> -                       MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK      0xd6
> -               >;
> -       };
> -
> -       pinctrl_sai5: sai5grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00 0xd6
> -                       MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK   0xd6
> -                       MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC   0xd6
> -               >;
> -       };
> -
> -       pinctrl_tpm: tpmgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00      0x19 /* Reset */
> -                       MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29       0x1d6 /* IRQ */
> -               >;
> -       };
> -
> -       pinctrl_typec: typec1grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01       0xc4
> -               >;
> -       };
> -
> -       pinctrl_uart2: uart2grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX    0x140
> -                       MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX    0x140
> -               >;
> -       };
> -
> -       pinctrl_uart3: uart3grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX          0x140
> -                       MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX          0x140
> -                       MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS          0x140
> -                       MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS         0x140
> -               >;
> -       };
> -
> -       pinctrl_usdhc2: usdhc2grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK        0x190
> -                       MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD        0x1d0
> -                       MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0    0x1d0
> -                       MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1    0x1d0
> -                       MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2    0x1d0
> -                       MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3    0x1d0
> -                       MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
> -               >;
> -       };
> -
> -       pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK        0x194
> -                       MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD        0x1d4
> -                       MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0    0x1d4
> -                       MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1    0x1d4
> -                       MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2    0x1d4
> -                       MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3    0x1d4
> -                       MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
> -               >;
> -       };
> -
> -       pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK        0x196
> -                       MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD        0x1d6
> -                       MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0    0x1d6
> -                       MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1    0x1d6
> -                       MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2    0x1d6
> -                       MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3    0x1d6
> -                       MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
> -               >;
> -       };
> -
> -       pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12       0x1c4
> -               >;
> -       };
> -
> -       pinctrl_wm8962: wm8962grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1      0x59
> -               >;
> -       };
> -};
> diff --git a/arch/arm/dts/imx8mp-beacon-som.dtsi b/arch/arm/dts/imx8mp-beacon-som.dtsi
> deleted file mode 100644
> index 8be251b693..0000000000
> --- a/arch/arm/dts/imx8mp-beacon-som.dtsi
> +++ /dev/null
> @@ -1,487 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright 2023 LogicPD, Inc. dba Beacon EmbeddedWorks
> - */
> -
> -/ {
> -       aliases {
> -               rtc0 = &rtc;
> -               rtc1 = &snvs_rtc;
> -       };
> -
> -       memory at 40000000 {
> -               device_type = "memory";
> -               reg = <0x0 0x40000000 0 0xc0000000>,
> -                     <0x1 0x00000000 0 0xc0000000>;
> -       };
> -
> -       reg_wl_bt: regulator-wifi-bt {
> -               compatible = "regulator-fixed";
> -               pinctrl-names = "default";
> -               pinctrl-0 = <&pinctrl_reg_wl_bt>;
> -               regulator-name = "wl-bt-pow-dwn";
> -               regulator-min-microvolt = <3300000>;
> -               regulator-max-microvolt = <3300000>;
> -               gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
> -               startup-delay-us = <70000>;
> -               regulator-always-on;
> -       };
> -};
> -
> -&A53_0 {
> -       cpu-supply = <&buck2>;
> -};
> -
> -&A53_1 {
> -       cpu-supply = <&buck2>;
> -};
> -
> -&A53_2 {
> -       cpu-supply = <&buck2>;
> -};
> -
> -&A53_3 {
> -       cpu-supply = <&buck2>;
> -};
> -
> -&eqos {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_eqos>;
> -       phy-mode = "rgmii-id";
> -       phy-handle = <&ethphy0>;
> -       snps,force_thresh_dma_mode;
> -       snps,mtl-rx-config = <&mtl_rx_setup>;
> -       snps,mtl-tx-config = <&mtl_tx_setup>;
> -       status = "okay";
> -
> -       mdio {
> -               compatible = "snps,dwmac-mdio";
> -               #address-cells = <1>;
> -               #size-cells = <0>;
> -
> -               ethphy0: ethernet-phy at 3 {
> -                       compatible = "ethernet-phy-id0022.1640",
> -                                    "ethernet-phy-ieee802.3-c22";
> -                       reg = <3>;
> -                       reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
> -                       interrupt-parent = <&gpio1>;
> -                       interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
> -               };
> -       };
> -
> -       mtl_rx_setup: rx-queues-config {
> -               snps,rx-queues-to-use = <5>;
> -               snps,rx-sched-sp;
> -
> -               queue0 {
> -                       snps,dcb-algorithm;
> -                       snps,priority = <0x1>;
> -                       snps,map-to-dma-channel = <0>;
> -               };
> -
> -               queue1 {
> -                       snps,dcb-algorithm;
> -                       snps,priority = <0x2>;
> -                       snps,map-to-dma-channel = <1>;
> -               };
> -
> -               queue2 {
> -                       snps,dcb-algorithm;
> -                       snps,priority = <0x4>;
> -                       snps,map-to-dma-channel = <2>;
> -               };
> -
> -               queue3 {
> -                       snps,dcb-algorithm;
> -                       snps,priority = <0x8>;
> -                       snps,map-to-dma-channel = <3>;
> -               };
> -
> -               queue4 {
> -                       snps,dcb-algorithm;
> -                       snps,priority = <0xf0>;
> -                       snps,map-to-dma-channel = <4>;
> -               };
> -       };
> -
> -       mtl_tx_setup: tx-queues-config {
> -               snps,tx-queues-to-use = <5>;
> -               snps,tx-sched-sp;
> -
> -               queue0 {
> -                       snps,dcb-algorithm;
> -                       snps,priority = <0x1>;
> -               };
> -
> -               queue1 {
> -                       snps,dcb-algorithm;
> -                       snps,priority = <0x2>;
> -               };
> -
> -               queue2 {
> -                       snps,dcb-algorithm;
> -                       snps,priority = <0x4>;
> -               };
> -
> -               queue3 {
> -                       snps,dcb-algorithm;
> -                       snps,priority = <0x8>;
> -               };
> -
> -               queue4 {
> -                       snps,dcb-algorithm;
> -                       snps,priority = <0xf0>;
> -               };
> -       };
> -};
> -
> -&flexspi {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_flexspi0>;
> -       status = "okay";
> -
> -       flash0: flash at 0 {
> -               compatible = "jedec,spi-nor";
> -               reg = <0>;
> -               spi-max-frequency = <80000000>;
> -               spi-tx-bus-width = <1>;
> -               spi-rx-bus-width = <4>;
> -       };
> -};
> -
> -&i2c1 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_i2c1>;
> -       clock-frequency = <384000>;
> -       status = "okay";
> -
> -       pmic at 25 {
> -               compatible = "nxp,pca9450c";
> -               reg = <0x25>;
> -               pinctrl-names = "default";
> -               pinctrl-0 = <&pinctrl_pmic>;
> -               interrupt-parent = <&gpio1>;
> -               interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> -
> -               regulators {
> -                       buck1: BUCK1 {
> -                               regulator-name = "BUCK1";
> -                               regulator-min-microvolt = <600000>;
> -                               regulator-max-microvolt = <2187500>;
> -                               regulator-boot-on;
> -                               regulator-always-on;
> -                               regulator-ramp-delay = <3125>;
> -                       };
> -
> -                       buck2: BUCK2 {
> -                               regulator-name = "BUCK2";
> -                               regulator-min-microvolt = <600000>;
> -                               regulator-max-microvolt = <2187500>;
> -                               regulator-boot-on;
> -                               regulator-always-on;
> -                               regulator-ramp-delay = <3125>;
> -                               nxp,dvs-run-voltage = <950000>;
> -                               nxp,dvs-standby-voltage = <850000>;
> -                       };
> -
> -                       buck4: BUCK4 {
> -                               regulator-name = "BUCK4";
> -                               regulator-min-microvolt = <3300000>;
> -                               regulator-max-microvolt = <3300000>;
> -                               regulator-boot-on;
> -                               regulator-always-on;
> -                       };
> -
> -                       buck5: BUCK5 {
> -                               regulator-name = "BUCK5";
> -                               regulator-min-microvolt = <1800000>;
> -                               regulator-max-microvolt = <1800000>;
> -                               regulator-boot-on;
> -                               regulator-always-on;
> -                       };
> -
> -                       buck6: BUCK6 {
> -                               regulator-name = "BUCK6";
> -                               regulator-min-microvolt = <600000>;
> -                               regulator-max-microvolt = <3400000>;
> -                               regulator-boot-on;
> -                               regulator-always-on;
> -                       };
> -
> -                       ldo1: LDO1 {
> -                               regulator-name = "LDO1";
> -                               regulator-min-microvolt = <1600000>;
> -                               regulator-max-microvolt = <1800000>;
> -                               regulator-boot-on;
> -                               regulator-always-on;
> -                       };
> -
> -                       ldo3: LDO3 {
> -                               regulator-name = "LDO3";
> -                               regulator-min-microvolt = <800000>;
> -                               regulator-max-microvolt = <1800000>;
> -                               regulator-boot-on;
> -                               regulator-always-on;
> -                       };
> -
> -                       ldo4: LDO4 {
> -                               regulator-name = "LDO4";
> -                               regulator-min-microvolt = <800000>;
> -                               regulator-max-microvolt = <3300000>;
> -                               regulator-boot-on;
> -                               regulator-always-on;
> -                       };
> -
> -                       ldo5: LDO5 {
> -                               regulator-name = "LDO5";
> -                               regulator-min-microvolt = <1800000>;
> -                               regulator-max-microvolt = <3300000>;
> -                               regulator-boot-on;
> -                               regulator-always-on;
> -                       };
> -               };
> -       };
> -};
> -
> -&i2c3 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_i2c3>;
> -       clock-frequency = <384000>;
> -       status = "okay";
> -
> -       eeprom at 50 {
> -               compatible = "atmel,24c64";
> -               reg = <0x50>;
> -               pagesize = <32>;
> -               read-only;      /* Manufacturing EEPROM programmed at factory */
> -       };
> -
> -       rtc: rtc at 51 {
> -               compatible = "nxp,pcf85263";
> -               reg = <0x51>;
> -       };
> -};
> -
> -&snvs_pwrkey {
> -       status = "okay";
> -};
> -
> -&uart1 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_uart1>;
> -       assigned-clocks = <&clk IMX8MP_CLK_UART1>;
> -       assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
> -       uart-has-rtscts;
> -       status = "okay";
> -
> -       bluetooth {
> -               compatible = "nxp,88w8997-bt";
> -       };
> -};
> -
> -&usdhc1 {
> -       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> -       pinctrl-0 = <&pinctrl_usdhc1>;
> -       pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> -       pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> -       bus-width = <4>;
> -       vmmc-supply = <&reg_wl_bt>;
> -       cap-sd-highspeed;
> -       sd-uhs-sdr50;
> -       sd-uhs-sdr104;
> -       keep-power-in-suspend;
> -       wakeup-source;
> -       non-removable;
> -       cap-power-off-card;
> -       #address-cells = <1>;
> -       #size-cells = <0>;
> -       status = "okay";
> -
> -       mwifiex: wifi at 1 {
> -               compatible = "marvell,sd8997";
> -               reg = <1>;
> -               pinctrl-names = "default";
> -               pinctrl-0 = <&pinctrl_wlan>;
> -               interrupt-parent = <&gpio2>;
> -               interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
> -       };
> -};
> -
> -&usdhc3 {
> -       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> -       pinctrl-0 = <&pinctrl_usdhc3>;
> -       pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> -       pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> -       bus-width = <8>;
> -       non-removable;
> -       status = "okay";
> -};
> -
> -&wdog1 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_wdog>;
> -       fsl,ext-reset-output;
> -       status = "okay";
> -};
> -
> -&iomuxc {
> -       pinctrl_eqos: eqosgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC             0x2
> -                       MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO           0x2
> -                       MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0       0x90
> -                       MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1       0x90
> -                       MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2       0x90
> -                       MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3       0x90
> -                       MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK       0x90
> -                       MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
> -                       MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0       0x16
> -                       MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1       0x16
> -                       MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2       0x16
> -                       MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3       0x16
> -                       MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
> -                       MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK       0x16
> -                       MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22               0x10
> -                       MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10     0x10
> -               >;
> -       };
> -
> -       pinctrl_flexspi0: flexspi0grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
> -                       MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
> -                       MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
> -                       MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
> -                       MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
> -                       MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
> -               >;
> -       };
> -
> -       pinctrl_i2c1: i2c1grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL         0x400001c2
> -                       MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA         0x400001c2
> -               >;
> -       };
> -
> -       pinctrl_i2c3: i2c3grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL         0x400001c2
> -                       MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA         0x400001c2
> -               >;
> -       };
> -
> -       pinctrl_pmic: pmicgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03     0x1c0
> -               >;
> -       };
> -
> -       pinctrl_reg_wl_bt: reg-wl-btgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06      0x40
> -               >;
> -       };
> -
> -       pinctrl_uart1: uart1grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX    0x140
> -                       MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX    0x140
> -                       MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS   0x140
> -                       MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS   0x140
> -               >;
> -       };
> -
> -       pinctrl_usdhc1: usdhc1grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK        0x190
> -                       MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD        0x1d0
> -                       MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0    0x1d0
> -                       MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1    0x1d0
> -                       MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2    0x1d0
> -                       MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3    0x1d0
> -               >;
> -       };
> -
> -       pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK        0x194
> -                       MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD        0x1d4
> -                       MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0    0x1d4
> -                       MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1    0x1d4
> -                       MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2    0x1d4
> -                       MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3    0x1d4
> -               >;
> -       };
> -
> -       pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK        0x196
> -                       MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD        0x1d6
> -                       MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0    0x1d6
> -                       MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1    0x1d6
> -                       MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2    0x1d6
> -                       MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3    0x1d6
> -               >;
> -       };
> -
> -       pinctrl_usdhc3: usdhc3grp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK      0x190
> -                       MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD      0x1d0
> -                       MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0  0x1d0
> -                       MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1  0x1d0
> -                       MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2  0x1d0
> -                       MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3  0x1d0
> -                       MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4    0x1d0
> -                       MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5   0x1d0
> -                       MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6   0x1d0
> -                       MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7     0x1d0
> -                       MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE  0x190
> -               >;
> -       };
> -
> -       pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK      0x194
> -                       MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD      0x1d4
> -                       MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0  0x1d4
> -                       MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1  0x1d4
> -                       MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2  0x1d4
> -                       MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3  0x1d4
> -                       MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4    0x1d4
> -                       MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5   0x1d4
> -                       MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6   0x1d4
> -                       MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7     0x1d4
> -                       MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE  0x194
> -               >;
> -       };
> -
> -       pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK      0x196
> -                       MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD      0x1d6
> -                       MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0  0x1d6
> -                       MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1  0x1d6
> -                       MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2  0x1d6
> -                       MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3  0x1d6
> -                       MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4    0x1d6
> -                       MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5   0x1d6
> -                       MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6   0x1d6
> -                       MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7     0x1d6
> -                       MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE  0x196
> -               >;
> -       };
> -
> -       pinctrl_wdog: wdoggrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B   0x166
> -               >;
> -       };
> -
> -       pinctrl_wlan: wlangrp {
> -               fsl,pins = <
> -                       MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09              0x140
> -               >;
> -       };
> -};
> diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
> index 5db643c195..dd6ced5b28 100644
> --- a/arch/arm/mach-imx/imx8m/Kconfig
> +++ b/arch/arm/mach-imx/imx8m/Kconfig
> @@ -184,6 +184,7 @@ config TARGET_IMX8MP_BEACON
>         select FSL_CAAM
>         select ARCH_MISC_INIT
>         select SPL_CRYPTO if SPL
> +       imply OF_UPSTREAM
>
>  config TARGET_IMX8MP_DEBIX_MODEL_A
>         bool "Polyhex i.MX8M Plus Debix Model A SBC"
> diff --git a/configs/imx8mp_beacon_defconfig b/configs/imx8mp_beacon_defconfig
> index 9d09dd4a7c..0ae8c9645a 100644
> --- a/configs/imx8mp_beacon_defconfig
> +++ b/configs/imx8mp_beacon_defconfig
> @@ -12,7 +12,7 @@ CONFIG_SF_DEFAULT_MODE=0
>  CONFIG_ENV_SIZE=0x2000
>  CONFIG_ENV_OFFSET=0xFFFFDE00
>  CONFIG_DM_GPIO=y
> -CONFIG_DEFAULT_DEVICE_TREE="imx8mp-beacon-kit"
> +CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-beacon-kit"
>  CONFIG_SPL_TEXT_BASE=0x920000
>  CONFIG_TARGET_IMX8MP_BEACON=y
>  CONFIG_SYS_MONITOR_LEN=524288
> --
> 2.43.0
>


More information about the U-Boot mailing list