[PATCH u-boot-mvebu v4 11/18] arm: mvebu: system-controller: Add support for SYSRESET
Marek Behún
kabel at kernel.org
Thu Apr 4 09:51:00 CEST 2024
Add driver model support for sysreset via mvebu system controller. This is
currently only available for U-Boot proper.
Signed-off-by: Marek Behún <kabel at kernel.org>
Reviewed-by: Stefan Roese <sr at denx.de>
---
arch/arm/mach-mvebu/Kconfig | 18 +++++-
arch/arm/mach-mvebu/Makefile | 2 +-
arch/arm/mach-mvebu/cpu.c | 2 +
arch/arm/mach-mvebu/system-controller.c | 75 +++++++++++++++++++++++--
4 files changed, 90 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 623432a60e..f15d3cc5ed 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -19,6 +19,7 @@ config ARMADA_32BIT
select SPL_SYS_NO_VECTOR_TABLE if SPL
select ARCH_VERY_EARLY_INIT
select ARMADA_32BIT_SYSCON_RESET if DM_RESET && PCI_MVEBU
+ select ARMADA_32BIT_SYSCON_SYSRESET if SYSRESET
# ARMv7 SoCs...
config ARMADA_375
@@ -457,16 +458,29 @@ config SF_DEFAULT_MODE
default 0x0
depends on MVEBU_SPL_BOOT_DEVICE_SPI
+config ARMADA_32BIT_SYSCON
+ bool
+ depends on ARMADA_32BIT
+ select REGMAP
+ select SYSCON
+
config ARMADA_32BIT_SYSCON_RESET
bool "Support Armada XP/375/38x/39x reset controller"
depends on ARMADA_32BIT
depends on DM_RESET
- select REGMAP
- select SYSCON
+ select ARMADA_32BIT_SYSCON
help
Build support for Armada XP/375/38x/39x reset controller. This is
needed for PCIe support.
+config ARMADA_32BIT_SYSCON_SYSRESET
+ bool "Support Armada XP/375/38x/39x sysreset via driver model"
+ depends on ARMADA_32BIT
+ depends on SYSRESET
+ select ARMADA_32BIT_SYSCON
+ help
+ Build support for Armada XP/375/38x/39x system reset via driver model.
+
source "board/solidrun/clearfog/Kconfig"
source "board/kobol/helios4/Kconfig"
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index d44ca3a0df..329c2e4915 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o
obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o
obj-$(CONFIG_ARMADA_MSYS) += ../../../drivers/ddr/marvell/axp/xor.o
-obj-$(CONFIG_ARMADA_32BIT_SYSCON_RESET) += system-controller.o
+obj-$(CONFIG_ARMADA_32BIT_SYSCON) += system-controller.o
ifdef CONFIG_ARMADA_38X
obj-$(CONFIG_MVEBU_EFUSE) += efuse.o
diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index 8e0de93538..7c62a5dbb6 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -52,6 +52,7 @@ void lowlevel_init(void)
*/
}
+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET)
void reset_cpu(void)
{
struct mvebu_system_registers *reg =
@@ -62,6 +63,7 @@ void reset_cpu(void)
while (1)
;
}
+#endif
u32 get_boot_device(void)
{
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index c5c05922f2..682431ee11 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -10,11 +10,24 @@
#include <regmap.h>
#include <reset-uclass.h>
#include <syscon.h>
+#include <sysreset.h>
#include <asm/io.h>
-#define MVEBU_SOC_CONTROL_1_REG 0x4
+#define MVEBU_SOC_CONTROL_1_REG 0x4
-#define MVEBU_PCIE_ID 0
+#if defined(CONFIG_ARMADA_375)
+# define MVEBU_RSTOUTN_MASK_REG 0x54
+# define MVEBU_SYS_SOFT_RST_REG 0x58
+#else
+# define MVEBU_RSTOUTN_MASK_REG 0x60
+# define MVEBU_SYS_SOFT_RST_REG 0x64
+#endif
+
+#define MVEBU_GLOBAL_SOFT_RST_BIT BIT(0)
+
+#define MVEBU_PCIE_ID 0
+
+#if IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_RESET)
static int mvebu_reset_of_xlate(struct reset_ctl *rst,
struct ofnode_phandle_args *args)
@@ -90,11 +103,65 @@ U_BOOT_DRIVER(mvebu_reset) = {
.ops = &mvebu_reset_ops,
};
+#endif /* IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_RESET) */
+
+#if IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET)
+
+static int mvebu_sysreset_request(struct udevice *dev, enum sysreset_t type)
+{
+ struct regmap *regmap = syscon_get_regmap(dev->parent);
+ uint bit;
+
+ if (type != SYSRESET_COLD)
+ return -EPROTONOSUPPORT;
+
+ bit = MVEBU_GLOBAL_SOFT_RST_BIT;
+
+ regmap_update_bits(regmap, MVEBU_RSTOUTN_MASK_REG, bit, bit);
+ regmap_update_bits(regmap, MVEBU_SYS_SOFT_RST_REG, bit, bit);
+
+ /* Loop while waiting for the reset */
+ while (1)
+ ;
+
+ return 0;
+}
+
+static struct sysreset_ops mvebu_sysreset_ops = {
+ .request = mvebu_sysreset_request,
+};
+
+U_BOOT_DRIVER(mvebu_sysreset) = {
+ .name = "mvebu-sysreset",
+ .id = UCLASS_SYSRESET,
+ .ops = &mvebu_sysreset_ops,
+};
+
+#endif /* IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET) */
+
static int mvebu_syscon_bind(struct udevice *dev)
{
+ int ret = 0;
+
/* bind also mvebu-reset, with the same ofnode */
- return device_bind_driver_to_node(dev, "mvebu-reset", "mvebu-reset",
- dev_ofnode(dev), NULL);
+ if (IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_RESET)) {
+ ret = device_bind_driver_to_node(dev, "mvebu-reset",
+ "mvebu-reset", dev_ofnode(dev),
+ NULL);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* bind also mvebu-sysreset, with the same ofnode */
+ if (IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET)) {
+ ret = device_bind_driver_to_node(dev, "mvebu-sysreset",
+ "mvebu-sysreset",
+ dev_ofnode(dev), NULL);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
}
static const struct udevice_id mvebu_syscon_of_match[] = {
--
2.43.2
More information about the U-Boot
mailing list