[PATCH u-boot-mvebu v4 00/18] Turris Omnia - New board revision support

Stefan Roese sr at denx.de
Thu Apr 4 14:04:57 CEST 2024


On 4/4/24 09:50, Marek Behún wrote:
> changes since v3:
> - added missing files turris_common.c and turris_common.h to patch 05/18
> - added comment to patch 11/18 before while (1); as discussed in v3
> 
> v1, v2 and v3 at:
>    https://patchwork.ozlabs.org/project/uboot/cover/20240304152148.3847-1-kabel@kernel.org/
>    https://patchwork.ozlabs.org/project/uboot/cover/20240323180711.5498-1-kabel@kernel.org/
>    https://patchwork.ozlabs.org/project/uboot/cover/20240327162355.24584-1-kabel@kernel.org/
> 
> Marek Behún (18):
>    arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia
>    arm: mvebu: turris_omnia: Add header containing MCU command interface
>      and use it
>    arm: mvebu: turris_{omnia, mox}: Don't print model two times
>    arm: mvebu: turris_omnia: Update MCU status and features reading
>    arm: mvebu: turris_omnia: Implement getting board information from MCU
>    arm: mvebu: turris_omnia: Print board ECDSA public key if available
>    arm: mvebu: turris_omnia: Disable Atmel SHA node if not present
>    arm: mvebu: spl: Do not build mvebu-reset in SPL
>    arm: mvebu: system-controller: Rework to use UCLASS_SYSCON
>    arm: mvebu: system-controller: Select mvebu-reset if DM_RESET &&
>      PCI_MVEBU
>    arm: mvebu: system-controller: Add support for SYSRESET
>    gpio: turris_omnia_mcu: Use byteorder conversion functions
>    gpio: turris_omnia_mcu: Update firmware features reading
>    gpio: turris_omnia_mcu: Add support for system power off via sysreset
>    arm: mvebu: turris_omnia: Enable poweroff command via sysreset in
>      defconfig
>    cmd: rng: Print "Abort" on -EINTR
>    misc: turris_omnia_mcu: Add support for rng provided by MCU
>    arm: mvebu: turris_omnia: Enable rng command in defconfig
> 
>   arch/arm/mach-mvebu/Kconfig              |  25 ++
>   arch/arm/mach-mvebu/Makefile             |   3 +-
>   arch/arm/mach-mvebu/cpu.c                |   2 +
>   arch/arm/mach-mvebu/system-controller.c  | 145 ++++++--
>   board/CZ.NIC/turris_atsha_otp.c          |  27 +-
>   board/CZ.NIC/turris_common.c             |  42 +++
>   board/CZ.NIC/turris_common.h             |  10 +
>   board/CZ.NIC/turris_mox/turris_mox.c     |   5 +-
>   board/CZ.NIC/turris_omnia/Makefile       |   2 +-
>   board/CZ.NIC/turris_omnia/turris_omnia.c | 310 ++++++++++++-----
>   cmd/rng.c                                |   7 +-
>   configs/turris_omnia_defconfig           |   6 +
>   drivers/gpio/Kconfig                     |   7 -
>   drivers/gpio/Makefile                    |   1 -
>   drivers/gpio/turris_omnia_mcu.c          | 316 -----------------
>   drivers/misc/Kconfig                     |  11 +
>   drivers/misc/Makefile                    |   1 +
>   drivers/misc/turris_omnia_mcu.c          | 411 +++++++++++++++++++++++
>   include/turris-omnia-mcu-interface.h     | 248 ++++++++++++++
>   19 files changed, 1097 insertions(+), 482 deletions(-)
>   create mode 100644 board/CZ.NIC/turris_common.c
>   create mode 100644 board/CZ.NIC/turris_common.h
>   delete mode 100644 drivers/gpio/turris_omnia_mcu.c
>   create mode 100644 drivers/misc/turris_omnia_mcu.c
>   create mode 100644 include/turris-omnia-mcu-interface.h

Applied to u-boot-marvell/master

Thanks,
Stefan


More information about the U-Boot mailing list