[PATCH 3/4] board: cssi: Initialise port F on MIAE

[Christophe Leroy]

From: Hugo Dubois <hugo.dubois.ext at csgroup.eu>

When equiped with the SRSA audio board, MIAE equipment
has an additional port called port F.

Initialise that port just like other ports of the board, so
that it is already configured when starting Linux kernel.

Signed-off-by: Hugo Dubois <hugo.dubois.ext at csgroup.eu>
Reviewed-by: CASAUBON Jean Michel <jean-michel.casaubon at csgroup.eu>
Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
---
 board/cssi/common/common.c | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/board/cssi/common/common.c b/board/cssi/common/common.c
index 7ecf772620..54e8c3cd03 100644
--- a/board/cssi/common/common.c
+++ b/board/cssi/common/common.c
@@ -208,12 +208,44 @@ void misc_init_r_common(void)
 	}
 }
 
+static void iop_setup_fpgam_common(void)
+{
+	u8 far_id = in_8(ADDR_FPGA_R_BASE + 0x43) >> 5;
+
+	if(far_id == FAR_CASRSA) {
+		/*
+		 * PFDIR[15]  = 0 [0x01]
+		 * PFDIR[14]  = 1 [0x02]
+		 * PFDIR[13]  = 1 [0x04]
+		 */
+		clrsetbits_8(ADDR_FPGA_R_BASE + 0x37, 0x01, 0x06);
+		/*
+		 * PFODR[15]  = 1 [0x01]
+		 * PFODR[14]  = 0 [0x02]
+		 * PFODR[13]  = 0 [0x04]
+		 */
+		clrsetbits_8(ADDR_FPGA_R_BASE + 0x39, 0x06, 0x01);
+		/*
+		 * PFDAT[15]  = 0 [0x01]
+		 * PFDAT[14]  = 1 [0x02]
+		 * PFDAT[13]  = 1 [0x04]
+		 * PFDAT[12]  = 1 [0x08]
+		 */
+		clrsetbits_8(ADDR_FPGA_R_BASE + 0x3B, 0x01, 0x0E);
+
+		/* Setup TOR_OUT */
+		out_8(ADDR_FPGA_R_BASE + 0x32, 0x2A);
+	}
+}
+
 void iop_setup_common(void)
 {
 	u8 type = in_8(ADDR_FPGA_R_BASE);
 
-	if (type == TYPE_MCR)
+	if (type == TYPE_MCR) {
 		iop_setup_mcr();
-	else if (type == TYPE_MIAE)
+	} else if (type == TYPE_MIAE) {
 		iop_setup_miae();
+		iop_setup_fpgam_common();
+	}
 }
-- 
2.43.0