[PATCH 0/3] qcom: add pinctrl driver for SM8550 and SM8650
Neil Armstrong
neil.armstrong at linaro.org
Fri Apr 5 10:15:09 CEST 2024
Add pinctrl driver for the TLMM block found in the SM8550 & SM8650 SoCs.
This driver only handles the gpio and qup debug uart pinmux, and makes sure
the pinconf applies on SDC2 pins.
Finally enable both drivers in the Qualcomm defconfig
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
Neil Armstrong (3):
pinctrl: qcom: Add SM8550 pinctrl driver
pinctrl: qcom: Add SM8650 pinctrl driver
qcom_defconfig: enable SM8550 & SM8650 pinctrl driver
configs/qcom_defconfig | 2 +
drivers/pinctrl/qcom/Kconfig | 14 +++++++
drivers/pinctrl/qcom/Makefile | 2 +
drivers/pinctrl/qcom/pinctrl-sm8550.c | 75 +++++++++++++++++++++++++++++++++++
drivers/pinctrl/qcom/pinctrl-sm8650.c | 75 +++++++++++++++++++++++++++++++++++
5 files changed, 168 insertions(+)
---
base-commit: cec1c47bdaf84a643f318d480b1218bfff1041ff
change-id: 20240404-topic-sm8x50-pinctrl-101fac729d23
Best regards,
--
Neil Armstrong <neil.armstrong at linaro.org>
More information about the U-Boot
mailing list