[PATCH 2/4] spmi: msm: properly format command
Neil Armstrong
neil.armstrong at linaro.org
Fri Apr 5 10:21:54 CEST 2024
Since version 2, the cmd format has changed, takes helpers
from Linux driver and use a switch/case to handle all
versions in msm_spmi_write/read() command.
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
drivers/spmi/spmi-msm.c | 75 ++++++++++++++++++++++++++++++++++++-------------
1 file changed, 55 insertions(+), 20 deletions(-)
diff --git a/drivers/spmi/spmi-msm.c b/drivers/spmi/spmi-msm.c
index 97383d8c7b8..68bb8a38c3c 100644
--- a/drivers/spmi/spmi-msm.c
+++ b/drivers/spmi/spmi-msm.c
@@ -78,6 +78,16 @@ struct msm_spmi_priv {
u32 arb_ver;
};
+static u32 pmic_arb_fmt_cmd_v1(u8 opc, u8 sid, u8 pid, u8 off)
+{
+ return (opc << 27) | (sid << 20) | (pid << 12) | (off << 4) | 1;
+}
+
+static u32 pmic_arb_fmt_cmd_v2(u8 opc, u8 off)
+{
+ return (opc << 27) | (off << 4) | 1;
+}
+
static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off,
uint8_t val)
{
@@ -93,24 +103,35 @@ static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off,
channel = priv->channel_map[usid][pid];
- if (priv->arb_ver == V5)
- ch_offset = SPMI_V5_RW_CH_OFFSET(channel);
- else
+ dev_dbg(dev, "[%d:%d] %s: channel %d\n", usid, pid, __func__, channel);
+
+ switch (priv->arb_ver) {
+ case V1:
+ ch_offset = SPMI_CH_OFFSET(channel);
+
+ reg = pmic_arb_fmt_cmd_v1(SPMI_CMD_EXT_REG_WRITE_LONG,
+ usid, pid, off);
+ break;
+
+ case V2:
ch_offset = SPMI_CH_OFFSET(channel);
+ reg = pmic_arb_fmt_cmd_v2(SPMI_CMD_EXT_REG_WRITE_LONG, off);
+ break;
+
+ case V5:
+ ch_offset = SPMI_V5_RW_CH_OFFSET(channel);
+
+ reg = pmic_arb_fmt_cmd_v2(SPMI_CMD_EXT_REG_WRITE_LONG, off);
+ break;
+ }
+
/* Disable IRQ mode for the current channel*/
writel(0x0, priv->spmi_chnls + ch_offset + SPMI_REG_CONFIG);
/* Write single byte */
writel(val, priv->spmi_chnls + ch_offset + SPMI_REG_WDATA);
- /* Prepare write command */
- reg |= SPMI_CMD_EXT_REG_WRITE_LONG << SPMI_CMD_OPCODE_SHIFT;
- reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT);
- reg |= (pid << SPMI_CMD_ADDR_SHIFT);
- reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT);
- reg |= 1; /* byte count */
-
/* Send write command */
writel(reg, priv->spmi_chnls + ch_offset + SPMI_REG_CMD0);
@@ -143,21 +164,35 @@ static int msm_spmi_read(struct udevice *dev, int usid, int pid, int off)
channel = priv->channel_map[usid][pid];
- if (priv->arb_ver == V5)
- ch_offset = SPMI_V5_OBS_CH_OFFSET(channel);
- else
+ dev_dbg(dev, "[%d:%d] %s: channel %d\n", usid, pid, __func__, channel);
+
+ switch (priv->arb_ver) {
+ case V1:
+ ch_offset = SPMI_CH_OFFSET(channel);
+
+ /* Prepare read command */
+ reg = pmic_arb_fmt_cmd_v1(SPMI_CMD_EXT_REG_READ_LONG,
+ usid, pid, off);
+ break;
+
+ case V2:
ch_offset = SPMI_CH_OFFSET(channel);
+ /* Prepare read command */
+ reg = pmic_arb_fmt_cmd_v2(SPMI_CMD_EXT_REG_READ_LONG, off);
+ break;
+
+ case V5:
+ ch_offset = SPMI_V5_OBS_CH_OFFSET(channel);
+
+ /* Prepare read command */
+ reg = pmic_arb_fmt_cmd_v2(SPMI_CMD_EXT_REG_READ_LONG, off);
+ break;
+ }
+
/* Disable IRQ mode for the current channel*/
writel(0x0, priv->spmi_obs + ch_offset + SPMI_REG_CONFIG);
- /* Prepare read command */
- reg |= SPMI_CMD_EXT_REG_READ_LONG << SPMI_CMD_OPCODE_SHIFT;
- reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT);
- reg |= (pid << SPMI_CMD_ADDR_SHIFT);
- reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT);
- reg |= 1; /* byte count */
-
/* Request read */
writel(reg, priv->spmi_obs + ch_offset + SPMI_REG_CMD0);
--
2.34.1
More information about the U-Boot
mailing list