[PATCH 0/3] qcom: add clock driver support for SM8550 and SM8650 SoCc

[Caleb Connolly]

Hi Neil,

On 04/04/2024 18:46, Neil Armstrong wrote:
> Add the GCC and TCSRCC clock driver for the SM8550 & SM8650 SoCs.
> 
> The GCC driver uses the clk-qcom infrastructure to support GDSCs,
> Resets and gates. While the TCSRCC is a simpler clock driver which
> only supports gates.
> 
> The GCC enable and set_rate callbacks contains some tweaks to
> setup clocks for Debug UART, SDCard controller and USB.
> 
> The TCSRCC gates returns the XO frequency, which is used by the
> Synopsys eUSB2 driver to determine the PHY configuration.
> 
> In addition, the drivers are enabled in the Qualcomm defconfig.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>

Reviewed-by: Caleb Connolly <caleb.connolly at linaro.org>
> ---
> Neil Armstrong (3):
>        clk: qcom: Add SM8550 clock driver
>        clk: qcom: Add SM8650 clock driver
>        qcom_defconfig: enable SM8550 & SM8650 clock driver
> 
>   configs/qcom_defconfig          |   2 +
>   drivers/clk/qcom/Kconfig        |  16 ++
>   drivers/clk/qcom/Makefile       |   2 +
>   drivers/clk/qcom/clock-sm8550.c | 335 ++++++++++++++++++++++++++++++++++++++++
>   drivers/clk/qcom/clock-sm8650.c | 332 +++++++++++++++++++++++++++++++++++++++
>   5 files changed, 687 insertions(+)
> ---
> base-commit: f0e6aba1218bca578605697eed8aa94582bf57bb
> change-id: 20240404-topic-sm8x50-clock-a76f8359b5fb
> 
> Best regards,

-- 
// Caleb (they/them)