[PATCH v3 1/1] fastboot: introduce 'oem board' subcommand

[Alexey Romanov]

Currently, fastboot protocol in U-Boot has no opportunity
to execute vendor custom code with verifed boot. This patch
introduce new fastboot subcommand fastboot oem board:<cmd>,
which allow to run custom oem_board function.

Default implementation is __weak. Vendor must redefine it in
board/ folder with his own logic.

For example, some vendors have their custom nand/emmc partition
flashing or erasing. Here some typical command for such use cases:

- flashing:

  $ fastboot stage bootloader.img
  $ fastboot oem board:write_bootloader

- erasing:

  $ fastboot oem board:erase_env

Signed-off-by: Alexey Romanov <avromanov at salutedevices.com>
---
 doc/android/fastboot.rst      | 18 ++++++++++++++++++
 drivers/fastboot/Kconfig      |  7 +++++++
 drivers/fastboot/fb_command.c | 30 ++++++++++++++++++++++++++++++
 include/fastboot.h            |  1 +
 4 files changed, 56 insertions(+)

diff --git a/doc/android/fastboot.rst b/doc/android/fastboot.rst
index 05d8f77759..2020590657 100644
--- a/doc/android/fastboot.rst
+++ b/doc/android/fastboot.rst
@@ -30,6 +30,7 @@ The following OEM commands are supported (if enabled):
 - ``oem bootbus``  - this executes ``mmc bootbus %x %s`` to configure eMMC
 - ``oem run`` - this executes an arbitrary U-Boot command
 - ``oem console`` - this dumps U-Boot console record buffer
+- ``oem board`` - this executes an custom board function which is defined by vendor
 
 Support for both eMMC and NAND devices is included.
 
@@ -246,6 +247,23 @@ including multiple commands (using e.g. ``;`` or ``&&``) and control structures
 (``if``, ``while``, etc.). The exit code of ``fastboot`` will reflect the exit
 code of the command you ran.
 
+Running Custom Vendor Code
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+U-Boot allows you to execute custom fastboot logic, which can be defined
+in board/ files. It can still be used for production devices with verified
+boot, because vendor define logic at compile time by overriding weak
+implementation of fastboot_oem_board() function. The attacker will
+not able to execute his commands / code. For example, this can be useful
+for custom flashing or erasing protocols::
+
+    $ fastboot stage bootloader.img
+    $ fastboot oem board:write_bootloader
+
+In this case, ``cmd_parameter`` argument of the function ``fastboot_oem_board()``
+will contain string "write_bootloader" and ``data`` argument is a pointer to
+fastboot input buffer, which containing the contents of bootloader.img file.
+
 References
 ----------
 
diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index 5e5855a76c..937a39f54a 100644
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -249,6 +249,13 @@ config FASTBOOT_CMD_OEM_CONSOLE
 	  Add support for the "oem console" command to input and read console
 	  record buffer.
 
+config FASTBOOT_OEM_BOARD
+	bool "Enable the 'oem board' command"
+	help
+	  This extends the fastboot protocol with an "oem board" command. This
+	  command allows running vendor custom code defined in board/ files.
+	  Otherwise, it will do nothing and send fastboot fail.
+
 endif # FASTBOOT
 
 endmenu
diff --git a/drivers/fastboot/fb_command.c b/drivers/fastboot/fb_command.c
index f95f4e4ae1..96c27afc60 100644
--- a/drivers/fastboot/fb_command.c
+++ b/drivers/fastboot/fb_command.c
@@ -42,6 +42,7 @@ static void oem_format(char *, char *);
 static void oem_partconf(char *, char *);
 static void oem_bootbus(char *, char *);
 static void oem_console(char *, char *);
+static void oem_board(char *, char *);
 static void run_ucmd(char *, char *);
 static void run_acmd(char *, char *);
 
@@ -113,6 +114,10 @@ static const struct {
 		.command = "oem console",
 		.dispatch = CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_CONSOLE, (oem_console), (NULL))
 	},
+	[FASTBOOT_COMMAND_OEM_BOARD] = {
+		.command = "oem board",
+		.dispatch = CONFIG_IS_ENABLED(FASTBOOT_OEM_BOARD, (oem_board), (NULL))
+	},
 	[FASTBOOT_COMMAND_UCMD] = {
 		.command = "UCmd",
 		.dispatch = CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT, (run_ucmd), (NULL))
@@ -542,3 +547,28 @@ static void __maybe_unused oem_console(char *cmd_parameter, char *response)
 	else
 		fastboot_response(FASTBOOT_MULTIRESPONSE_START, response, NULL);
 }
+
+/**
+ * fastboot_oem_board() - Execute the OEM board command. This is default
+ * weak implementation, which may be overwritten in board/ files.
+ *
+ * @cmd_parameter: Pointer to command parameter
+ * @data: Pointer to fastboot input buffer
+ * @size: Size of the fastboot input buffer
+ * @response: Pointer to fastboot response buffer
+ */
+void __weak fastboot_oem_board(char *cmd_parameter, void *data, u32 size, char *response)
+{
+	fastboot_fail("oem board function not defined", response);
+}
+
+/**
+ * oem_board() - Execute the OEM board command
+ *
+ * @cmd_parameter: Pointer to command parameter
+ * @response: Pointer to fastboot response buffer
+ */
+static void __maybe_unused oem_board(char *cmd_parameter, char *response)
+{
+	fastboot_oem_board(cmd_parameter, fastboot_buf_addr, image_size, response);
+}
diff --git a/include/fastboot.h b/include/fastboot.h
index 1e7920eb91..2ca1b907a5 100644
--- a/include/fastboot.h
+++ b/include/fastboot.h
@@ -48,6 +48,7 @@ enum {
 	FASTBOOT_COMMAND_OEM_BOOTBUS,
 	FASTBOOT_COMMAND_OEM_RUN,
 	FASTBOOT_COMMAND_OEM_CONSOLE,
+	FASTBOOT_COMMAND_OEM_BOARD,
 	FASTBOOT_COMMAND_ACMD,
 	FASTBOOT_COMMAND_UCMD,
 	FASTBOOT_COMMAND_COUNT
-- 
2.34.1