[PATCH v1 25/25] ARM: dts: stm32: Add led-blue for stm32mp157c-ed1-scmi-u-boot

Patrice Chotard patrice.chotard at foss.st.com
Tue Apr 9 17:02:15 CEST 2024


The blue led is used to indicate U-Boot entering / exit indication
then Linux heartbeat.

Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
---

 arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi
index b38e816f888..7c0d1bab11a 100644
--- a/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi
@@ -12,7 +12,7 @@
 	};
 
 	config {
-		u-boot,boot-led = "heartbeat";
+		u-boot,boot-led = "led-blue";
 		u-boot,error-led = "led-red";
 		u-boot,mmc-env-partition = "u-boot-env";
 	};
@@ -36,6 +36,10 @@
 	led {
 		compatible = "gpio-leds";
 
+		led-blue {
+			gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
+		};
+
 		led-red {
 			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
 		};
-- 
2.25.1



More information about the U-Boot mailing list