[PATCH 5/7] clk/qcom: sdm845: enable SDCC2 core clock

[Caleb Connolly]

Allow setting the clock rate for the SD card core clock. This is
required for SD card support on SDM845 devices.

Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 drivers/clk/qcom/clock-qcom.h   |  1 +
 drivers/clk/qcom/clock-sdm845.c | 17 +++++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h
index cc170d8e3f9e..f6445c8f566f 100644
--- a/drivers/clk/qcom/clock-qcom.h
+++ b/drivers/clk/qcom/clock-qcom.h
@@ -12,8 +12,9 @@
 #define CFG_CLK_SRC_GPLL0_AUX2 (2 << 8)
 #define CFG_CLK_SRC_GPLL9 (2 << 8)
 #define CFG_CLK_SRC_GPLL6 (4 << 8)
 #define CFG_CLK_SRC_GPLL7 (3 << 8)
+#define CFG_CLK_SRC_GPLL4 (5 << 8)
 #define CFG_CLK_SRC_GPLL0_EVEN (6 << 8)
 #define CFG_CLK_SRC_MASK  (7 << 8)
 
 #define RCG_CFG_REG		0x4
diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c
index e9c61eb480de..782df7da8444 100644
--- a/drivers/clk/qcom/clock-sdm845.c
+++ b/drivers/clk/qcom/clock-sdm845.c
@@ -23,8 +23,9 @@
 
 #define USB30_PRIM_MASTER_CLK_CMD_RCGR 0xf018
 #define USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR 0xf030
 #define USB3_PRIM_PHY_AUX_CMD_RCGR 0xf05c
+#define SDCC2_APPS_CLK_CMD_RCGR 0x1400c
 
 static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
 	F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625),
 	F(14745600, CFG_CLK_SRC_GPLL0_EVEN, 1, 768, 15625),
@@ -43,8 +44,19 @@ static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
 	F(128000000, CFG_CLK_SRC_GPLL0, 1, 16, 75),
 	{ }
 };
 
+static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk_src[] = {
+	F(400000, CFG_CLK_SRC_CXO, 12, 1, 4),
+	F(9600000, CFG_CLK_SRC_CXO, 2, 0, 0),
+	F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0),
+	F(25000000, CFG_CLK_SRC_GPLL0_EVEN, 12, 0, 0),
+	F(50000000, CFG_CLK_SRC_GPLL0_EVEN, 6, 0, 0),
+	F(100000000, CFG_CLK_SRC_GPLL0, 6, 0, 0),
+	F(201500000, CFG_CLK_SRC_GPLL4, 4, 0, 0),
+	{ }
+};
+
 static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate)
 {
 	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
 	const struct freq_tbl *freq;
@@ -54,8 +66,13 @@ static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate)
 		freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate);
 		clk_rcg_set_rate_mnd(priv->base, SE9_UART_APPS_CMD_RCGR,
 				     freq->pre_div, freq->m, freq->n, freq->src, 16);
 		return freq->freq;
+	case GCC_SDCC2_APPS_CLK:
+		freq = qcom_find_freq(ftbl_gcc_sdcc2_apps_clk_src, rate);
+		clk_rcg_set_rate_mnd(priv->base, SDCC2_APPS_CLK_CMD_RCGR,
+				     freq->pre_div, freq->m, freq->n, freq->src, 8);
+		return freq->freq;
 	default:
 		return 0;
 	}
 }

-- 
2.44.0