[PATCH v2 3/3] button: qcom-pmic: add support for pmk8350 button configs

[Neil Armstrong]

Finally add the entries for the qcom,pmk8350-pwrkey and qcom,pmk8350-resin
found on PMICs used with SM8350 and later SoCs.

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 drivers/button/button-qcom-pmic.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/button/button-qcom-pmic.c b/drivers/button/button-qcom-pmic.c
index f6da958097c..ad7fed3ddaa 100644
--- a/drivers/button/button-qcom-pmic.c
+++ b/drivers/button/button-qcom-pmic.c
@@ -36,6 +36,8 @@ struct qcom_pmic_btn_priv {
 #define PON_INT_RT_STS                        0x10
 #define  PON_KPDPWR_N_SET		0
 #define  PON_RESIN_N_SET		1
+#define  PON_GEN3_RESIN_N_SET		6
+#define  PON_GEN3_KPDPWR_N_SET		7
 
 static enum button_state_t qcom_pwrkey_get_state(struct udevice *dev)
 {
@@ -69,6 +71,18 @@ static const struct qcom_pmic_btn_data qcom_pmic_btn_data_table[] = {
 		.code = KEY_DOWN,
 		.label = "vol_down",
 	},
+	{
+		.compatible = "qcom,pmk8350-pwrkey",
+		.status_bit = PON_GEN3_KPDPWR_N_SET,
+		.code = KEY_ENTER,
+		.label = "pwrkey",
+	},
+	{
+		.compatible = "qcom,pmk8350-resin",
+		.status_bit = PON_GEN3_RESIN_N_SET,
+		.code = KEY_DOWN,
+		.label = "vol_down",
+	},
 };
 
 static const struct qcom_pmic_btn_data *button_qcom_pmic_match(ofnode node)
@@ -179,6 +193,7 @@ static const struct udevice_id qcom_pwrkey_ids[] = {
 	{ .compatible = "qcom,pm8916-pon" },
 	{ .compatible = "qcom,pm8941-pon" },
 	{ .compatible = "qcom,pm8998-pon" },
+	{ .compatible = "qcom,pmk8350-pon" },
 	{ }
 };
 

-- 
2.34.1