[PATCH RFC 06/15] sunxi: enable support for SPI NAND booting on SUNIV

[John Watts]

From: Icenowy Zheng <uwu at icenowy.me>

As we added support for SPI NAND to the existing SPL SPI codepath, route
the boot code to it when it detects the BROM loads SPL from SPI NAND, as
for SoCs with both SPI NAND and boot media indicator support, the boot
media indicator is the same for SPI NOR and NAND.

Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
Reviewed-by: Samuel Holland <samuel at sholland.org>
---
 arch/arm/mach-sunxi/board.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index f4dbb2a740..9b0d68a7a0 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -223,12 +223,10 @@ static int suniv_get_boot_source(void)
 	case SUNIV_BOOTED_FROM_MMC0:
 		return SUNXI_BOOTED_FROM_MMC0;
 	case SUNIV_BOOTED_FROM_SPI:
+	case SUNIV_BOOTED_FROM_NAND:
 		return SUNXI_BOOTED_FROM_SPI;
 	case SUNIV_BOOTED_FROM_MMC1:
 		return SUNXI_BOOTED_FROM_MMC2;
-	/* SPI NAND is not supported yet. */
-	case SUNIV_BOOTED_FROM_NAND:
-		return SUNXI_INVALID_BOOT_SOURCE;
 	}
 	/* If we get here something went wrong try to boot from FEL.*/
 	printf("Unknown boot source from BROM: 0x%x\n", brom_call);

-- 
2.44.0