[PATCH v4 1/7] usb: dwc3: Add dwc3 glue driver for am62

[Sverdlin, Alexander]

Hi Sjoerd!

Thank you for your efforts on the topic!

On Fri, 2024-01-12 at 09:52 +0100, Sjoerd Simons wrote:
> Add glue code for TI AM62 to the dwc3 driver; Most code adopted from
> TI vendor u-boot code.
> 
> Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>
> Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>

Works for me on AM6232:

Tested-by: Alexander Sverdlin <alexander.sverdlin at siemens.com>

> ---
> 
> Changes in v4:
> - Add config dependency on SYSCON
> - Move defines and constants outside out of function scope
> 
> Changes in v2:
> - Switch dwc3 glue to a seperate driver rather then in dwc-generic
> 
>  drivers/usb/dwc3/Kconfig     |  14 ++++
>  drivers/usb/dwc3/Makefile    |   1 +
>  drivers/usb/dwc3/dwc3-am62.c | 125 +++++++++++++++++++++++++++++++++++
>  3 files changed, 140 insertions(+)
>  create mode 100644 drivers/usb/dwc3/dwc3-am62.c

-- 
Alexander Sverdlin
Siemens AG
www.siemens.com