[PATCH v6 5/5] imx93: convert to OF_UPSTREAM

[Peng Fan]

> Subject: Re: [PATCH v6 5/5] imx93: convert to OF_UPSTREAM
> 
> 
> Hello,
> 
> I was able to test this series on the imx93-phyboard-segin. Up to that specific
> commit no issue to report.
> 
> That specific commit however, using an updated dts subtree at 2639a0e2fd,
> fails to boot.
> 
> There is no more garbage on the UART, but the boot stops after BL31 is
> started:
> 
> U-Boot SPL 2024.04-rc5-00388-gf81e4e85fd6-dirty (Apr 14 2024 - 12:15:51
> +0200)
> SOC: 0xa0009300
> LC: 0x40040
> M33 prepare ok
> Normal Boot
> WDT:   Started wdog at 42490000 with servicing every 1000ms (40s timeout)
> Trying to boot from BOOTROM
> Boot Stage: Primary boot
> image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x45c00
> by ROM_API
> NOTICE:  BL31: v2.8(release):lf-6.1.36-2.1.0-0-g1a3beeab6-dirty
> NOTICE:  BL31: Built : 11:39:38, Aug  7 2023
> 
> Not sure where that could come from.

Which dts upstream tag are u using?

Do you have time to debug the issue? I not have the board, so not sure what
happens here.

Regards,
Peng.

> 
> Mathieu