[PATCH V4] mtd: spinand: Add support for XTX SPINAND
Dario Binacchi
dario.binacchi at amarulasolutions.com
Sun Apr 14 15:51:32 CEST 2024
Hi Bruce,
On Tue, Mar 12, 2024 at 2:43 AM Bruce Suen <bruce_suen at 163.com> wrote:
>
> Add support for XTX XT26G0xA and XT26xxxD. The driver is ported from
> linux-6.7.1. This driver is tested on Banana BPI-R3 with XT26G01A and
> XT26G12D.
>
> Signed-off-by: Bruce Suen <bruce_suen at 163.com>
> Reviewed-by: Frieder Schrempf <frieder.schrempf at kontron.de>
> ---
> V3->V4:
> - modify commit message minor flaws
> ---
> drivers/mtd/nand/spi/Makefile | 2 +-
> drivers/mtd/nand/spi/core.c | 1 +
> drivers/mtd/nand/spi/xtx.c | 266 ++++++++++++++++++++++++++++++++++
> include/linux/mtd/spinand.h | 1 +
> 4 files changed, 269 insertions(+), 1 deletion(-)
> create mode 100644 drivers/mtd/nand/spi/xtx.c
>
> diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
> index f172f4787f..65b836b34c 100644
> --- a/drivers/mtd/nand/spi/Makefile
> +++ b/drivers/mtd/nand/spi/Makefile
> @@ -1,5 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
>
> spinand-objs := core.o esmt.o gigadevice.o macronix.o micron.o paragon.o
> -spinand-objs += toshiba.o winbond.o
> +spinand-objs += toshiba.o winbond.o xtx.o
> obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
> index 8ca33459f9..62c28aa422 100644
> --- a/drivers/mtd/nand/spi/core.c
> +++ b/drivers/mtd/nand/spi/core.c
> @@ -829,6 +829,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
> &toshiba_spinand_manufacturer,
> &winbond_spinand_manufacturer,
> &esmt_c8_spinand_manufacturer,
> + &xtx_spinand_manufacturer,
> };
>
> static int spinand_manufacturer_match(struct spinand_device *spinand,
> diff --git a/drivers/mtd/nand/spi/xtx.c b/drivers/mtd/nand/spi/xtx.c
> new file mode 100644
> index 0000000000..aee1849a71
> --- /dev/null
> +++ b/drivers/mtd/nand/spi/xtx.c
> @@ -0,0 +1,266 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Author:
> + * Felix Matouschek <felix at matouschek.org>
> + */
> +
> +#include <linux/bitfield.h>
> +#ifndef __UBOOT__
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#endif
> +#include <linux/mtd/spinand.h>
> +
> +#define SPINAND_MFR_XTX 0x0B
> +
> +#define XT26G0XA_STATUS_ECC_MASK GENMASK(5, 2)
> +#define XT26G0XA_STATUS_ECC_NO_DETECTED (0 << 2)
> +#define XT26G0XA_STATUS_ECC_8_CORRECTED (3 << 4)
> +#define XT26G0XA_STATUS_ECC_UNCOR_ERROR (2 << 4)
> +
> +#define XT26XXXD_STATUS_ECC3_ECC2_MASK GENMASK(7, 6)
> +#define XT26XXXD_STATUS_ECC_NO_DETECTED (0)
> +#define XT26XXXD_STATUS_ECC_1_7_CORRECTED (1)
> +#define XT26XXXD_STATUS_ECC_8_CORRECTED (3)
> +#define XT26XXXD_STATUS_ECC_UNCOR_ERROR (2)
> +
> +static SPINAND_OP_VARIANTS(read_cache_variants,
> + SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
> + SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
> + SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
> + SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
> + SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
> + SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
> +
> +static SPINAND_OP_VARIANTS(write_cache_variants,
> + SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
> + SPINAND_PROG_LOAD(true, 0, NULL, 0));
> +
> +static SPINAND_OP_VARIANTS(update_cache_variants,
> + SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
> + SPINAND_PROG_LOAD(false, 0, NULL, 0));
> +
> +static int xt26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *region)
> +{
> + if (section)
> + return -ERANGE;
> +
> + region->offset = 48;
> + region->length = 16;
> +
> + return 0;
> +}
> +
> +static int xt26g0xa_ooblayout_free(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *region)
> +{
> + if (section)
> + return -ERANGE;
> +
> + region->offset = 1;
> + region->length = 47;
> +
> + return 0;
> +}
> +
> +static const struct mtd_ooblayout_ops xt26g0xa_ooblayout = {
> + .ecc = xt26g0xa_ooblayout_ecc,
> + .rfree = xt26g0xa_ooblayout_free,
> +};
> +
> +static int xt26g0xa_ecc_get_status(struct spinand_device *spinand,
> + u8 status)
> +{
> + status = status & XT26G0XA_STATUS_ECC_MASK;
> +
> + switch (status) {
> + case XT26G0XA_STATUS_ECC_NO_DETECTED:
> + return 0;
> + case XT26G0XA_STATUS_ECC_8_CORRECTED:
> + return 8;
> + case XT26G0XA_STATUS_ECC_UNCOR_ERROR:
> + return -EBADMSG;
> + default:
> + break;
> + }
> +
> + /* At this point values greater than (2 << 4) are invalid */
> + if (status > XT26G0XA_STATUS_ECC_UNCOR_ERROR)
> + return -EINVAL;
> +
> + /* (1 << 2) through (7 << 2) are 1-7 corrected errors */
> + return status >> 2;
> +}
> +
> +static int xt26xxxd_ooblayout_ecc(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *region)
> +{
> + if (section)
> + return -ERANGE;
> +
> + region->offset = mtd->oobsize / 2;
> + region->length = mtd->oobsize / 2;
> +
> + return 0;
> +}
> +
> +static int xt26xxxd_ooblayout_free(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *region)
> +{
> + if (section)
> + return -ERANGE;
> +
> + region->offset = 2;
> + region->length = mtd->oobsize / 2 - 2;
> +
> + return 0;
> +}
> +
> +static const struct mtd_ooblayout_ops xt26xxxd_ooblayout = {
> + .ecc = xt26xxxd_ooblayout_ecc,
> + .rfree = xt26xxxd_ooblayout_free,
> +};
> +
> +static int xt26xxxd_ecc_get_status(struct spinand_device *spinand,
> + u8 status)
> +{
> + switch (FIELD_GET(STATUS_ECC_MASK, status)) {
> + case XT26XXXD_STATUS_ECC_NO_DETECTED:
> + return 0;
> + case XT26XXXD_STATUS_ECC_UNCOR_ERROR:
> + return -EBADMSG;
> + case XT26XXXD_STATUS_ECC_1_7_CORRECTED:
> + return 4 + FIELD_GET(XT26XXXD_STATUS_ECC3_ECC2_MASK, status);
> + case XT26XXXD_STATUS_ECC_8_CORRECTED:
> + return 8;
> + default:
> + break;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static const struct spinand_info xtx_spinand_table[] = {
> + SPINAND_INFO("XT26G01A",
> + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE1),
> + NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + SPINAND_HAS_QE_BIT,
> + SPINAND_ECCINFO(&xt26g0xa_ooblayout,
> + xt26g0xa_ecc_get_status)),
> + SPINAND_INFO("XT26G02A",
> + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE2),
> + NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + SPINAND_HAS_QE_BIT,
> + SPINAND_ECCINFO(&xt26g0xa_ooblayout,
> + xt26g0xa_ecc_get_status)),
> + SPINAND_INFO("XT26G04A",
> + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE3),
> + NAND_MEMORG(1, 2048, 64, 128, 2048, 40, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + SPINAND_HAS_QE_BIT,
> + SPINAND_ECCINFO(&xt26g0xa_ooblayout,
> + xt26g0xa_ecc_get_status)),
> + SPINAND_INFO("XT26G01D",
> + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x31),
> + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + 0,
> + SPINAND_ECCINFO(&xt26xxxd_ooblayout,
> + xt26xxxd_ecc_get_status)),
> + SPINAND_INFO("XT26G11D",
> + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x34),
> + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + 0,
> + SPINAND_ECCINFO(&xt26xxxd_ooblayout,
> + xt26xxxd_ecc_get_status)),
> + SPINAND_INFO("XT26Q01D",
> + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x51),
> + NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + 0,
> + SPINAND_ECCINFO(&xt26xxxd_ooblayout,
> + xt26xxxd_ecc_get_status)),
> + SPINAND_INFO("XT26G02D",
> + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x32),
> + NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + 0,
> + SPINAND_ECCINFO(&xt26xxxd_ooblayout,
> + xt26xxxd_ecc_get_status)),
> + SPINAND_INFO("XT26G12D",
> + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x35),
> + NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + 0,
> + SPINAND_ECCINFO(&xt26xxxd_ooblayout,
> + xt26xxxd_ecc_get_status)),
> + SPINAND_INFO("XT26Q02D",
> + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x52),
> + NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + 0,
> + SPINAND_ECCINFO(&xt26xxxd_ooblayout,
> + xt26xxxd_ecc_get_status)),
> + SPINAND_INFO("XT26G04D",
> + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x33),
> + NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + 0,
> + SPINAND_ECCINFO(&xt26xxxd_ooblayout,
> + xt26xxxd_ecc_get_status)),
> + SPINAND_INFO("XT26Q04D",
> + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x53),
> + NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + 0,
> + SPINAND_ECCINFO(&xt26xxxd_ooblayout,
> + xt26xxxd_ecc_get_status)),
> +};
> +
> +static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {
> +};
> +
> +const struct spinand_manufacturer xtx_spinand_manufacturer = {
> + .id = SPINAND_MFR_XTX,
> + .name = "XTX",
> + .chips = xtx_spinand_table,
> + .nchips = ARRAY_SIZE(xtx_spinand_table),
> + .ops = &xtx_spinand_manuf_ops,
> +};
> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
> index 6f479fa5ad..13b5a52f8b 100644
> --- a/include/linux/mtd/spinand.h
> +++ b/include/linux/mtd/spinand.h
> @@ -251,6 +251,7 @@ extern const struct spinand_manufacturer paragon_spinand_manufacturer;
> extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
> extern const struct spinand_manufacturer winbond_spinand_manufacturer;
> extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
> +extern const struct spinand_manufacturer xtx_spinand_manufacturer;
>
> /**
> * struct spinand_op_variants - SPI NAND operation variants
> --
> 2.34.1
>
Applied to nand-next
Thanks and regards,
Dario
--
Dario Binacchi
Senior Embedded Linux Developer
dario.binacchi at amarulasolutions.com
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info at amarulasolutions.com
www.amarulasolutions.com
More information about the U-Boot
mailing list