[PATCH v2 17/17] board: cssi: Read and display MCR board address

[Christophe Leroy]

MCR boards are plugged in racks. The position in the rack can be read
in a register.

For MCR3000, that's provided by the FPGA so check it is loaded before
reading the address.

For the other boards, the FPGA is loaded by hardware so it can be
read inconditionnaly.

Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
---
 board/cssi/common/common.c   | 6 +++++-
 board/cssi/mcr3000/mcr3000.c | 7 ++++++-
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/board/cssi/common/common.c b/board/cssi/common/common.c
index 6848efd43b..0292a9016e 100644
--- a/board/cssi/common/common.c
+++ b/board/cssi/common/common.c
@@ -164,7 +164,7 @@ int checkboard_common(void)
 
 void misc_init_r_common(void)
 {
-	u8 tmp, far_id;
+	u8 tmp, far_id, addr;
 	int count = 3;
 
 	switch (in_8(ADDR_FPGA_R_BASE)) {
@@ -173,6 +173,10 @@ void misc_init_r_common(void)
 		if ((in_8(ADDR_FPGA_R_BASE + 0x31) & FPGA_R_ACQ_AL_FAV) == 0)
 			env_set("bootdelay", "60");
 
+		addr = in_8(ADDR_FPGA_R_BASE + 0x43);
+		printf("Board address: 0x%2.2x (System %d Rack %d Slot %d)\n",
+		       addr, addr >> 7, (addr >> 4) & 7, addr & 15);
+
 		env_set("config", CFG_BOARD_MCR3000_2G);
 		env_set("hostname", CFG_BOARD_MCR3000_2G);
 		break;
diff --git a/board/cssi/mcr3000/mcr3000.c b/board/cssi/mcr3000/mcr3000.c
index 15a2d0d946..48e82a902d 100644
--- a/board/cssi/mcr3000/mcr3000.c
+++ b/board/cssi/mcr3000/mcr3000.c
@@ -167,7 +167,12 @@ int misc_init_r(void)
 	setbits_be32(&immr->im_cpm.cp_pbdir, 0xf);
 	clrbits_be32(&immr->im_cpm.cp_pbdat, 0x1);
 
-	load_fpga();
+	if (!load_fpga()) {
+		u8 addr = in_be16((void *)0x1400009c);
+
+		printf("Board address: 0x%2.2x (System %d Rack %d Slot %d)\n",
+		       addr, addr >> 7, (addr >> 4) & 7, addr & 15);
+	}
 
 	/* if BTN_ACQ_AL is pressed then bootdelay is changed to 60 second */
 	if ((in_be16(&iop->iop_pcdat) & 0x0004) == 0)
-- 
2.43.0